SILVERCREST SFB 80 A1 Foot Spa Instruction Manual
- June 5, 2024
- SILVERCREST
Table of Contents
www.lidl-service.com FOOT SPA SFB 80
A1
FOOT SPA
Operation and safety notes 400503_2107
|
---|---
Warnings and symbols used
The following warnings are used in this user manual and on the packaging:
| DANGER! This symbol in combination with the signal word “Danger” marks
a high-risk hazard that if not prevented could result in death or serious
injury.
---|---
| WARNING! This symbol in combination with the signal word “Warning”
marks a medium-risk hazard that if not prevented could result in death or
serious injury.
| NOTE: This symbol in combination with “Note” provides additional useful
information.
| UKCA mark indicates conformity with relevant Great Britain regulations
applicable for this product
(The UKCA mark logo is valid in Great Britain only).
|
Alternating current/voltage
Hz| Hertz (supply frequency)
W| Watts
| The symbol for a Protection Class II product
| CE mark indicates conformity with relevant EU directives applicable for this
product.
FOOT SPA
Introduction
We congratulate you on the purchase of your new product. You have chosen a
high-quality product. The instructions for use are part of the product. They
contain important information concerning safety, use and disposal. Before
using the product, please familiarise yourself with all of the safety
information and instructions for use. Only use the product as described and
for the specified applications. If you pass the product on to anyone else,
please ensure that you also pass on all the documentation with it.
Intended use
This product is designed for relaxing, caring for, and refreshing tired feet.
The product is designed for household use; it is not suitable for medical or
commercial use.
The manufacturer accepts no liability for damages caused by improper use.
Scope of delivery
After unpacking the product, check if the delivery is complete and if all
parts are in good condition. Remove all packing materials before use.
1 Foot spa
1 Massager (pedicure attachment)
1 Callus remover (pedicure attachment)
1 Brush (pedicure attachment)
1 Pedicure attachments storage
1 Instruction manual
Description of parts
Before reading, unfold the page containing the illustrations and familiarise
yourself with all the functions of the product.
Figure A
-
Function button
-
Splash guard
-
Massager (pedicure attachment)
-
Pedicure attachment adapter
-
Pedicure attachments storage
-
Callus remover (pedicure attachment)
-
Brush (pedicure attachment)
-
Water container
-
MAX marking
-
ON/OFF indication light
Figure B -
0 (Off)
-
Vibration massage
-
Bubble bath while keeping the water warm
-
Vibration massage and bubble bath while keeping the water warm
-
Massage rollers
Figure C -
Locking clips
-
Cord storage with holder for the power plug
-
Supply cord with power plug
Technical data
Rated voltage: 220–240 V∼, 50–60 Hz
Rated power: 80 W
Safety instructions
BEFORE USING THE PRODUCT, PLEASE FAMILIARISE
YOURSELF WITH ALL OF THE SAFETY INFORMATION AND INSTRUCTIONS FOR USE! WHEN
PASSING THIS PRODUCT ON TO OTHERS, PLEASE ALSO INCLUDE ALL THE DOCUMENTS!
In the case of damage resulting from non-compliance with these operating
instructions, the warranty claim becomes invalid! No liability is accepted for
consequential damage!
In the case of material damage or personal injury caused by incorrect handling
or non-compliance with the safety instructions, no liability is accepted!
Children and persons with limitations
WARNING! DANGER OF DEATH AND ACCIDENTS FOR TODDLERS AND CHILDREN!
Never leave children unsupervised with the packaging material. The packaging
material represents a danger of suffocation. Children frequently underestimate
the dangers.
- This product can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the product.
- Cleaning and user maintenance shall not be performed by children unless supervised.
Electrical safety
WARNING! Risk of electric
shock! Never attempt to repair the product yourself. In case of malfunction,
repairs are to be conducted by qualified personnel only.
WARNING! Risk of electric shock! Do not immerse the product’s electrical
components in water or other liquids. Never hold the electric components of
the product under running water.
WARNING! Risk of electric shock! If water leaks from the product, do not
use the product any longer.
WARNING! Risk of injury! Turn off the product and disconnect it from the power supply before cleaning and when the product is not in use.
WARNING! Risk of electric shock! Do not use the product if it is damaged. Disconnect the product from the power supply and contact your retailer in the event of damage.
- If liquid gets into the product’s electrical components or the product falls into the water, immediately disconnect the plug. Do not use the product any longer.
- Before connecting the product to the power supply, check that the voltage rating corresponds with the power supply details shown on the product’s rating label.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Do not operate the product with wet hands. Do not touch the function button1 or the power plug with wet hands.
- No action is needed from users to shift the product between 50 and 60 Hz. The product adapts itself for both 50 and 60 Hz.
Health
- This product is not a medical device.
DANGER! Risk of injury!
- Only use the product on an even, stable, heat-resistant, clean, nonslippery and dryfloor.
- Never stand up with your feet inside the product.
WARNING! Do not use this product and consult your doctors if you suffer
from any of the following conditions:
–Skin inflammations
–Wounds/swelling of the feet
–Skin reddening
–Diabetes
–Eczema/psoriasis
–Heart disease
- The product may have a hot surface during operation. Persons insensitive to heat must be careful when using the product.
ATTENTION! Risk of product damage! Do not add any additives, like oil, to the water container. After the water has evaporated, these additives may burn and damage the product.
Fire/burn hazards and heat
**DANGER!** Risk of fire! Never leave the product unattended while it is
plugged in.
- Never select the keep warm function if there is no water inside the water container 8].
Before first use
- Remove all packaging materials.
- Clean the product and its accessories m(see “Cleaning and care”).
Preparation
Fill the water container 8] up to MAX9] with water in the desired temperature.
ATTENTION! Risk of product damage!
Do not fill in water at a temperature exceeding 42 ºC. Always check the water
temperature before placing your feet inside or switching on the product.
- Do not fill water above the MAX marking9].
- Do not splash water on the function button1], the ON/OFF indication light9] or the base of the product.
- Do not remove the massage rollers1] or splash guard2], except when cleaning the product (see “Cleaning and care”).
NOTES:
Only use clean water. Do not add any soap, bath salts or any other substances
to the water container8].
Do not operate the product without having filled in water first.
Before and after each use: Clean the product (see “Cleaning and care”).
- Place the product on an even, stable, heat-resistant, clean, non-slippery, and dry floor.
- Connect the supply cord with the power plug[17] to a suitable socket outlet.
Operation
-
Switching the product on/off
-
Switching the product on: Set the function button[1] to an operation mode (see “Choosing a mode”).
The ON/OFF indication light[10] switches on to confirm that the product is operating (Fig. A). -
Switching the product off: Set the function button[1] to 0[11]. The ON/OFF indication light[10] switches off.
Choosing a mode
Set the function button1] to the icons corresponding to the desired mode (Fig.
B).
Mode | Function button | Function |
---|---|---|
12] Mode 1 | Vibration massage | |
13] Mode 2 | Bubble bath* | |
14] Mode 3 | Vibration massage and |
* While keeping the water warm
Using the product without pedicure attachment
- Move your feet back and forth on the massage rollers15] for a reflex zone massage.
- The recommended operation time is 15 minutes.
- Using the product with pedicure attachment
- The product includes 3 pedicure attachments:
Pedicure attachment | Function |
---|---|
3] Massager | Massage |
6] Callus remover | Removing hardened |
7] Brush | Massage |
- Place the desired pedicure attachment3] 6] 7] onto the pedicure attachment adapter4].
- Place the remaining 2 pedicure attachments onto the 2 slots on the pedicure attachments storage5].
- Rub your foot with gentle pressure on the pedicure attachment placed on the pedicure attachment adapter4].
- You may vary the application area on your foot by changing the position of your foot on the pedicure attachment.
After use
- Switch the product off (see “Switching the product on/off”).
- Disconnect the supply cord with power plug[17] from the power outlet.
- Empty the water container8] into a large sink, bathtub or shower.
Cleaning and care
WARNING! Risk of electric shock! Before cleaning the product: Always
disconnect the supply cord with power plug[17] from the wall outlet. Never let
the electrical components of the product get in contact with water!
**ATTENTION!** Risk of product damage!
Do not splash water on the function button1], the ON/OFF indication light10]
or the base of the product.
NOTE: Clean the product after each use to avoid the accumulation of water, grease and other residues.
- Removing the massage rollers15]: Pull the massage rollers upwards carefully.
- Removing the splash guard2]: Undo the locking clips2] (Fig. C). Pull the splash guard upwards carefully.
Part | Cleaning method |
---|
Outer surface (foot spa)
6] Callus remover
2] Splash guard
3] Massager
5] Pedicure attachment
storage
7] * Brush
8] Water container
15] Massage rollers| Wipe down with a
slightly moist cloth.
Rinse with clean
water.
- Pedicure attachment
Storage
Fix the supply cord with power plug[18] on the cord storage with a holder for
the power plug[17 ] (Fig. C).
Store the product in the original packaging when it is not in use.
Store the product in a dry, secure location away from children.
Disposal
The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.
Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with the following meaning: 1–7: plastics / 20–22: paper and fibreboard / 80–98: composite materials.
The product
and packaging materials are recyclable and disposed of it separately for
better waste treatment. The Triman logo is valid in France only.
Contact your local refuse disposal authority for more details on how to
dispose of your worn-out product.
To help protect the environment, please dispose of the product properly when
it has reached the end of its useful life and not in household waste.
Information on collection points and their opening hours can be obtained from
your local authority.
Warranty
The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects, you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below. The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase. Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. This warranty becomes void if the product has been damaged, or used or maintained improperly. The warranty applies to defects in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.
Warranty claim procedure
To ensure quick processing of your case, please observe the following
instructions: Please have the till receipt and the item number (IAN
400503_2107) available as proof of purchase. You will find the item number on
the rating plate, an engraving, on the front page of the instructions for use
(bottom left), or as a sticker on the rear or bottom of the product. If
functional or other defects occur, please contact the service department
listed either by telephone or by e-mail. You can return a defective product to
us free of charge to the service address that will be provided to you. Ensure
that you enclose the proof of purchase (till receipt) and information about
what the defect is and when it occurred.
Service
Service Great Britain
Tel.: 08000569216
E-Mail: owim@lidl.co.uk
OWIM GmbH & Co. KG
Stiftsbergstraße 1
74167 Neckarsulm
GERMANY
Model No.: HG08655-BS
Version: 02/2022
IAN 400503_2107
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>