xiaomi RB02 AC1200 Gigabit Router User Manual

xiaomi RB02 AC1200 Gigabit Router User Manual

Step 1: Connect the cables

Power on the router, then connect the Internet (WAN) port to the DSL/Cable/satellite modem

• If your Internet network is connected by a network cable via the Internet wall socket, connect the cable directly to the router’s WAN port.

Step 2: Set up the network connection

1. Connect to the Wi-Fi using a phone or computer (no password). Refer to the information on the boom of the router for the Wi-Fi name.

• Wait until the system indicator light turns blue. Search for the Wi-Fi network and connect 2. Once the Wi-Fi is connected, you will be directed to the configuration page. If the configuration page is not present, open the browser and go to “router.miwifi.com” or “192.168.31.1” to complete the configuration.
• Mi Router EULA is available at –http://www1.miwifi.com/router/eula/20191230.html 3. Enter the account name and password provided by your broadband provider, then click/tap Next (It depends on the Internet Service Provider you selected, whether your account name and password are required or not).
• If you have forgo en your broadband account name or password, you can get them by contacting your broadband provider

Managing Mi Wi-Fi

The web management website is router.miwifi.com and supports basic Internet functions. Scan the QR code, download the Mi Home / Xiaomi Home app, and manage your router anytime, anywhere.

https://home.mi.com/do/home.html?f=xz&p=73501

FAQ

I have finished seeing up my network. Why can’t I connect to the Internet?
Step 1: Use your phone to search for the Wi-Fi network set by your router. If you can’t find it, make sure that the router is connected to the power and starts working normally
Step 2: Connect your phone to your router’s Wi-Fi network, go to “router.miwifi.com”, and try to fix the problem based on the network diagnostics results

I’ve forgo en the administrator password for my router. What should I do?
If you haven’t set a specific password, your administrator password will be the same as your Wi-Fi password, so try using this to log in. If the problem persists, it is recommended that you restore your router to the factory settings, then set up the network again

How do I restore my router to the factory settings?
First make sure that the router starts working normally, then hold down the Reset button at the base of the router for more than 5 seconds and let go when the system status light turns orange. When the router finishes restarting, the reset was successful

What do the different indicator lights mean on the router?
There should be two indicator lights on the front panel, which are the network status light (two colours: blue and orange) and the system status light (two colours: blue and orange)

Specifications

Name: Xiaomi Router AC1200
Model: RB02 Operating
Temperature: 0°C to 40°C
Input: 12V, 1A
Operating Frequency: 2400MHz­2483.5MHz (20dBm for UK), 5150MHz­5250MHz (23dBm for UK), 2400MHz­2473.5MHz (for US), 5150MHz­5250MHz (for US), 5725MHz­5850MHz (for US)

Certifications:

Hereby, Xiaomi Communications Co., Ltd declares that the radio equipment type R4A is in compliance with Directive 2014/53/EU as well as UK Radio Equipment Regulations SI 2017 NO.1206. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

Caution: The product can be used within all European Union countries. To comply with CE RF exposure requirements, the device must be installed and operated 20cm (8 inches) or more between the product and all person’s body. The adapter shall be installed near the equipment and shall be easily accessible.

This device is restricted to indoor use only when operating in 5150-5250MHz frequency range

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC radiation exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Manufactured by: Xiaomi Communications Co., Ltd #019, 9th Floor, Building 6, 33 Xi’erqi Middle Road, Haidian District, Being, China, 100085

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>