BETSTCO FH-BG130 Bale Gripper User Manual
- June 10, 2024
- BETSTCO
Table of Contents
FH-BG130 Bale Gripper
User Manual
FH-BG130 BALE GRIPPER
OPERATION & PARTS MANUAL
Please read these instructions before using. Always grease all fittings and be sure to always check and fill with oil before operating! Retain this manual for future use.
INTRODUCTION
With your purchase of the Farmer-Helper Wrapped Bale Grabber you have made the
right choice for the handling of your wrapped ( or unwrapped) round bales.
Through its unique construction it requires minimal maintenance.
Before using your bale grabber read this manual carefully to familiarize
yourself with this machine. Operating unfamiliar machines may lead to
accidents.
This operator’s manual has been written to assist you in obtaining the best
possible results from your Farmer-Helper Wrapped Bale Grabber. Keep it in a
safe place so you can always use it as a reference booklet. If any questions
should remain, however, you can contact
Bitstock, who will gladly assist you.
The bale grabber is designed to fit your front end loader or skid steer and
easily adaptable to your quick-attach brackets (plate). You can grab all sizes
of round bales up to 5 feet in diameter from any position for transportation
and stacking.
CAUTION: Never use the bale grabber to lift or transport people!!!
SAFETY PRECAUTIONS
– Follow all the rules of operation from the operator’s manual of your tractor
or skid steer.
– Use a tractor with a roll-over protective system (ROPS).
– When using the bale grabber on sloping or uneven terrain, always maintain
proper stability. It is therefore advisable to use a wide wheel track setting
on your tractor. Also avoid sudden maneuvers and change of direction.
– While moving, make sure you keep the load low and as close to the tractor or
skid steer as possible, because a heavy load can easily tip your tractor or
skid steer over.
– Have the rear of your tractor or skid steer properly counter balanced with
weights to create optimal stability.
– Comply with federal and local laws governing highway safety and movement of
farm machinery on public roads.
– Make sure you place the bales on a flat and solid surface so they do not
start rolling or moving unexpected! y.
– When in use, never stand within operating range of the bale grabber and
never under a raised load.
– Strictly operate the bale grabber from your tractor or skid steer driver’s
seat and make sure you have a good view on your job.
– Make sure the grabber’s arms can move freely and do not jam any hydraulic
hoses.
– Do not confuse your bale grabber’s controls with other controls on your
tractor or skid steer to avoid unintentional operation.
– When you are driving and not carrying a bale, make sure your grabber is
completely open ( cylinder closed) to avoid cylinder damage.
– Take care! The hydraulic circuit operates under pressure. Make sure that the
hydraulic systems of both your bale grabber and tractor or skid steer are de-
pressurized before connecting any hoses between the two.
– Clearly label or tag the hydraulic fittings of the tractor or skid steer and
bale grabber to avoid incorrect connection, which may lead to invert functions
such as raising
and lowering.
– Make sure that your hydraulic hoses do not get jammed during operation and
never operate the bale grabber with a hydraulic hose that has been pinched.
– Regularly check all hydraulic hoses and replace any worn or damaged ones
immediately.
When replacing hoses, use only replacements compliant to original technical
specifications.
– Take all possible precautions to avoid accidents when searching for
hydraulic leaks.
– Remember that liquids under pressure, and especially oil, can penetrate the
skin and cause serious injury. Consult a doctor immediately to prevent
infection in case of injury.
– Before dismounting from your tractor or skid steer, always check if the bale
grabber is lowered to the ground, the tractor or skid steer is in neutral and
the parking brake applied.
And always place your bale grabber on a flat and solid surface for storage.
TECHNICAL DETAILS AND OPERATION
3.1 Picture with part specification
3.2 ASSEMBLY AND OPERATING INSTRUCTIONS
Because the Bale Grabber is a loading/stacking device, make sure that it is
assembled by a qualified mechanic.
You pick up a round bale as follows:
– You drive up to the bale with your frame straight up and the grabbers as far
apart as possible;
– Make sure the center of the frame touches the bale and the grabbers are on
each side;
– When positioned correctly, you can operate the cylinder so the grabber will
close and pick up the bale.
If you have to transport a bale before loading or stacking, make sure to keep
it as low to the ground as possible to ensure the best stability. Especially
on rough or uneven terrain or slopes make sure to maintain stability by using
counter balance weights or a wide wheel setting on your tractor or skid steer.
Bales should be placed on a flat and solid surface to prevent them from
moving/rolling and any bystanders should keep a safe distance from the
machine.
If your bale grabber is equipped with a red tie-rods cylinder it is rated at
2500 PSI max.
And if it is equipped with a black tie-rods or welded cylinder it is rated at
3000 PSI max.
MAINTENANCE
Little maintenance is required for the Farmer-Helper Wrapped Bale Grabber, but
the following must be strictly followed.
It is equipped with four grease nipples that should be greased regularly.
Make sure to check and tighten all nuts and bolts prior to each use. You
must lube all moving parts prior to each use as well. Any worn parts have to
be replaced immediately.
In case you have to replace a part, make sure that it is a genuine Farmer-
Helper part which can be obtained through Bestow.
WARRANTY
Warranty is at the sole discretion of the manufacturer. Your Farmer-Helper
Bale Grabber has a two year warranty from the date of purchase to the original
owner. It is limited to material and/ or construction failures that have to
be examined by the factory. So, if within two years from the date of purchase,
your bale grabber fails due to a defect in material or workmanship, you will
have to return it prepaid to the factory for inspection.
The warranty does not apply to damage received during transport.
NO. | PART # | NAME & SPECIFACATION | QTY. | REMARK |
---|---|---|---|---|
1 | bg130A.011 | Main Frame | 1 | |
2 | BG130.012 | Arm LH | 1 | |
3 | BG130.013 | Arm RH | 1 | |
4 | BG130.014 | Pin Arm | 2 | |
5 | BG130.015 | Pin Cylinder | 2 | |
6 | RP-5 | Cylinder Pin Retaining Clip | 4 | |
7 | JBZQ4454-18 | Seal Gasket 18 | 4 | |
8 | BG130.017 | Bale Grabber Hose | 4 | |
9 | BG130.101 | Bolt M18x1.5×36 | 2 | |
10 | BX92RSA.30.101 | Straight Fang | 2 | |
11 | KJ-R1-2-M | Hydro Coupler 1/2 | 2 | |
12 | JB/T7940.1-8 | Grease Fang M8x1 | 2 | |
13 | BG130.016 | Cylinder, Assembly | 1 |
Name:———————–
Address:——————–
City State Zip:————
Phone:——————–
E-mail:——————-
Parts Request Form
E-mail cservice@betstco.com
Model Number:———————
Serial Number:———————
Purchased From:——————-
Purchase Date:——————–
Item No. | Description | Qty | Price | Amount |
---|---|---|---|---|
Comments:
FARMER-HELPER
Limited Warranty
Unless otherwise stated on purchase invoice, Bitstock warrants to original
Purchaser that Farmer-Helper products are free from major defects in material
under normal use and service for a period of 90 Days from the date the product
is purchased or shipped, whichever is later. Commercial use 90 days. Use at
address that is not yours, is considered commercial use. Consumable,
Expendable, Wear Items (Rubber plastic parts, hydraulic hoses, belts, tires,
cables, blades, tines, wedges, teeth, tiups, chains, pins, brushes, filters,
etc.) and cracked hydraulic pumps, bent or broken cylinder rods are not
covered under this warranty. Warranty does not cover items that have been
modified, damaged by abuse or usage not in accordance with design or
maintenance.
Bitstock obligation under this warranty is to repair or replace defective upon
approval by; Bitstock, 83371 Melton Rd. N, Creswell OR 97426 that Warranty
Claim is valid. Product shall be returned upon request of Bitstock.
Transportation charges to be prepaid by user.
Gasoline or diesel engines used to powered Farmer-Helper products are
covered by the warranty of the appropriate engine manufacture an Purchaser
must look to the engine manufacture for all issues relating to engine
operation.
Bitstock assumes no responsibility for outside labor. PERMISSABLE BY
APPLICABLE LAW, BETSTCO HEREBY DISCLAIMS ALL WARRANTIES OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING, ANY IMPLIED WARRANTIES WITH RESPECT TO THE
PRODUCT PURCHASED, WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, BETSTCO
HEREBY EXPRESSLY DISCLAIMS ALL LIABILITY FOR PRODUCT DEFECT OR FAILURE, CLAIMS
THAT ARE DUE TO NORMAL WEAR, PRODUCT MISUSE, ABUSE, PRODUCT MODIFICATION,
IMPROPER PRODUCT SELECTION, NON-COMPLIANCE WITH ANY CODES, OR
MISAPPROPRIATION. BETSTCO MAKES NO WARRANTIES TO THOSE DEFINED AS CONSUMERS IN
THE MAGNUSON-MOSS WARRANTY FEDERAL TRADE COMMISION IMPROVEMENTS ACT. THE
FOREGOING EXCLUSION OF IMPLIED WARRANTIES DO NOT APPLY TO THE EXTENT
PROHIBITED BY LAW. PLEASE REFER TO YOUR LOCAL LAWS FOR ANY SUCH PROHIBITIONS.
THERE SHALL BE NO LIABILITY FOR PRODUCT LIABILITY OR LIABILITY ON THE PART OF
BETSTCO FOR ANY GENERAL SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
SALE OR USE OF ANY PRODUCTS SOLD BY BETSTCO OR AN AGENT THEREOF, BETSTCO MAKES
NO WARRANTIES, EXPRESS OR IMPLIED, (INCLUDING, BUT NOT LIMITED TO, ANY
WARRANTY OF MERCHANTABILITY OR FITNESS OF THE PRODUCTS FOR ANY PURPOSE) WITH
RESPECT TO THE PRODUCTS COVERED BY THIS AGREEMENT EXCEPT AS IN THIS PARAGRAPH
OTHERWISE EXPRESSLY PROVIDED.
THIS IS THE SOLE AND ONLY WARRANTY OF VALUE-LEADER PRODUCTS, NO OTHER WARRANTY
IS APPLICABLE, EITHE EXPRESSED OR IMPLIED, IN FACT BY LAW.
This warranty shall not be interpreted to render Bitstock, or any authorized
agent liable for injury or damages of any kind or nature, direct,
consequential, or contingent, to a person or property.
The sole and only remedy in regard to any defective product shall be the
repair or replacement thereof as herein provided, Bitstock, agent(s) of
Bitstock shall not be liable for any consequential, special, incidental or
punitive damages resulting from or caused by any such defects
Bitstock reserves the rights to make improvements in design or changes in
specifications at any time, without incurring any obligations to owners of the
units previously sold.
WARRANTY VOID IF REGISTRATION IS NOT RECEIVED OR RECORDED ONLINE WITHIN 30 DAYS OF PURCHASE DATE OR SHIP DATE, WHICHEVER IS LATER.
ITEM:—————————————–
MODEL#————————————
PURCHASE DATE:———————-
PURCHASED FROM:——————-
GIFT INV# ORDER#———————
OWNER NAME:————————–
SERIAL #———————————-
OWNER ADDRESS:——————–
CITY:—————————————
COUNTY:———————————-
ST:——————————————
ZIP:—————————————-
PHONE:———————————-
EMAIL:—————– —————–
ACCEPTANCE OF RESPONSIBILITY: I (PURCHASER) HAVE READ OPERATORS MANUAL AND
LIMITED WARRANTY OR SOMEONE HAS READ/AND EXPLAINED ALL INSTRUCTIONS TO ME. I
UNDERSTAND THIS WARRANTY DOES NOT COVER ANY LABOR AND THAT ALL DISPUTES WILL
BE SETTLED BY BINDING ARBITRATION. BINDING ARBITRATION IS CONDUCTED BY THE
BETTER BUSINESS BUREAU (BBB) LOCATED AT 4004 SW KRUSE WAY PLACE ST 375 LAKE
OSWEGO OR 97035 OR THE CURRENT BBB LOCATION CLOSEST TO BETSTCO. I ACKNOWLEDGE
MY LIMITED WARRANTY IS VOID IF ANY ATTEMPT TO REPAIR OR REPLACE DEFECTIVE
PARTS HAS BEEN MADE BY UNAUTHORIZED PERSONNEL.I ACKNOWLEDGE RECEIPT OF MY
OPERATORS MANUAL AND HAVE READ THE SAFE OPERATION SECTION. I ACKNOWLEDGE
UNDERSTANDING MAINTENANCE AND SAFE OPERATION REQUIREMENTS, ITEM
SPECIFACATIONS, OPERATION, CONTROLS AND STORAGE REQUIRMENTS. I UNDERSTAND
THAT IS ALONE AM RESPONSIBLE FOR PROPER MAINTENANCE, CARE AND SAFE OPERATIONOF
THIS FARMER-HELPER ITEM
I (PURCHASER) AGREE THAT PERSONS NOT FAMILIAR WITH THE OPERATION OF THIS ITEM
SHOULD NOT BE ALLOWED TO USE IT. CHILDREN ESPECIALLY SHOULD NOT OPERATE OR BE
NEAR POWER PRODUCTS WHEN IN USE. ANYONE OPERATING VALUE-LEADER PRODUCTS SHOULD
HAVE READ OPERATIONS MANUALS AND SAFTEY MANUALS.
OWNERS SIGNATURE: x —————-
DATE:- —————————————-
YOU MUST SIGN THIS WARRANTY AND MAIL OR FAX A COPY TO BETSTCO, 83371 MELTON
RD, CRESWELL OR, 97426. IF YOU PREFER YOU MAY COMPLETE YOUR REGISTRATION
ONLINE AT https://betstco.com/product-registration/. THIS WARRANTY IS NOT
EFFECTIVE UNLESS PURCHASER COMPLETE REGISTRATION AND WARRANTY FOR WITHIN 30
DAYS OF PURCHASE OR SHIP DATE WHICHEVER IS LATER.
NOTE: WE MAY REFUSE WARRANTY OF ANY KIND UNLESS BETSTCO, RECEIVES A
COMPLETED, LEGIBLE AND SIGNED WARRANTY REGISTRATION. IT IS THE RESPONSIBILITY
OF THE PURCHASER TO ASSURE THAT REGISTRATION DOCUMENT IS RECIEVED BY
1 YEAR EXTENDED WARRANTY & REGISTRATION
FARMER-HELPER IMPLEMENTS
BRANDED PRODUCTS
1 YEAR EXTENDED WARRANTY
1 Year Extended Warranty amends to original Recorded Warranty Registration the
time period of described coverage. Extended Warranty does not apply to
consumable and Expendable Item as described in Product Warranty Registration.
This amendment does not affect any other part of recorded Warranty Registration
or policy. No one is authorized to alter, modify, or enlarge this Amendment to
original recorded Warranty Registration
EXTENDED REGISTRATION & PAYMENT MUST BE RECEIVED WITHIN 30 DAYS OF PURCHASE
DATE
EXTENDED WARRANTY REGISTRATION
PRODUCT & MODEL #—————————-
SERIAL #———————————————-
OWNER NAME :———————————–
BETSTCO INVOICE #————————–
ACCEPTANCE OF RESPONSIBILITY:
I (PURCHASER) HAVE READ AND UNDERSTAND THE EXTENDED WARRANTY OR SOMEONE HAS
READ AND EXPLAINED ALL THE ABOVE TO ME. I UNDERSTAND THIS EXTENDED WARRANTY
DOES NOT COVER ANY LABOR. I HAVE FILED MY ORIGINAL WARRANTY REGISTRATION AND
FULLY UNDERSTAND MY REQUIREMENTS. I UNDERSTAND THAT I ALONE AM RESPONSIBLE
FOR PROPER MAINTENANCE, CARE AND SAFE OPERATION OF THIS TRACTOR IMPLEMENT.
OWNERS SIGNATURE: x– ———-FAX TO
1-541-895-2756
DATE:———————————-
YOU MUST SIGN THIS WARRANTY AND MAIL OR FAX A COPY TO BETSTCO, 83371 MELTON
RD, CRESWELL OR. IF YOU PREFER YOU MAY COMPLETE YOUR REGISTRATION ONLINE AT
https://betstco.com/product-registration/. THIS WARRANTY IS NOT EFFECTIVE
UNLESS PURCHASER COMPLETE REGISTRATION AND WARRANTY FOR WITHIN 30 DAYS OF
PURCHASE OR SHIP DATE WHICHEVER IS LATER.
NOTE: WE MAY REFUSE WARRANTY OF ANY KIND UNLESS BETSTCO, RECEIVES A
COMPLETED, LEGIBLE AND SIGNED WARRANTY REGISTRATION. IT IS THE RESPONSIBILITY
OF THE PURCHASER TO ASSURE THAT REGISTRATION DOCUMENT IS RECIEVED BY
www.Betstco.com
541-895-3083 M-F 7am-4pm PST
83371 Melton Rd, Creswell OR 97426
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>