SALUKI TECHNOLOGY ST2683 Series Insulation Resistance Meter Owner’s Manual
- June 12, 2024
- SALUKI TECHNOLOGY
Table of Contents
SALUKI TECHNOLOGY ST2683 Series Insulation Resistance Meter
Introduction
RS232
|
USB HOST
|
USB DEVICE
|
HANDLER
---|---|---|---
standard
|
standard
|
standard
|
standard
ST2683A/B
Rack mount（mm）： 215(W)×88(H)×335(D)
Dimension （mm）： 235(W)×105(H)×360(D)
Weight: 3.6kg
Application
- Ultra-High Value Resistors
- Insulation resistance and leakage current of capacitors
- Various dielectric insulating materials, equipment, wires and cables
- Insulation testing from safety regulations
Features
- Test voltage range: 1-1000V(ST2683A) 1-500V(ST2683B)
- Insulation resistance test range: 100KΩ-10TΩ
- Insulation resistance, leakage current dual display
- 24-bits, 4.3-inch and 4-wire touch LCD screen
- LCD resolution: 480*272
- Zero clearing function
- Contact detection function for capacitive components
- Fast test: 30ms
- Programmable sequence test mode
- 6 ranges, manual or auto range mode
- 4-bin comparison function: 3 bins for PASS, 1 bin for FAIL
- 20 setup files can be stored in the internal memory, support U-disk
- Measurement data can be stored on U-disk
- Automatically upgrade firmware by a disk
- Selectable Chinese and English operation interfaces
- Handler interface realizes on-line operation
- Achieve remote control by RS232C and USB Device interface
- Footswitch trigger function
Specifications
| Model | ST2683A | ST2683B |
|---|
Resistance test
Test range| 100kΩ-10TΩ| 100kΩ-5TΩ
Test accuracy| I >10nA: ±2%
I≤10nA: ±5%
Current test
Test range| Range 1: 100uA – 1mA, internal input impedance 10kΩ
Range 2: 10uA – 100uA, internal input impedance 10kΩ
Range 3: 1uA – 10uA, internal input impedance 10kΩ
Range 4: 100nA – 1uA, internal input impedance 10kΩ
Range 5: 10nA – 100nA, internal input impedance 1MΩ
Range 6: 1nA – 10nA, internal input impedance 1MΩ
Test accuracy| 2%±3pA
Test voltage
Range| 1V-1000V| 1V-500V
Accuracy| Voltage≥10V: 1%±1V Voltage<10V: 10%±0.1V
Current limit| 10mA
ON/OFF| Manually turn on or off it on front panel, or controlled by built-in
timer, or by remote control
Charge time| 0-999s programmable
Measurement delay| 0-999s programmable
Measurement speed| Fast: single measurement time≤30ms； Slow: single
measurement time≤60ms
Comparator function| 4 bins: 3 bins for PASS, 1 bin for FAIL
Range mode| Auto, Hold
Memory| Internal memory and external USB disk
Standard Accessories
ST26004B 2-terminal test clip leads
Customer Support
Tel: 886. 909 602 109 Email:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>