ARCADE 1UP ATR-E-20650 ATARI COUCHCADE Wireless Gaming System User Manual

ARCADE 1UP ATR-E-20650 ATARI COUCHCADE Wireless Gaming System

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line. www.alza.co.uk/kontakt +44 (0)203 514 4411
Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Includes

Wireless Control Deck, Game Console, HDMI Cable, Micro USB Power Cable
WARNING: To ensure safe operation of the product, be sure to read this Owner’s Manual before use. Keep this Owner’s Manual in a safe place for easy reference when needed.

Control deck set up

1. Install 4 batteries (not included) in the battery compartment on the side of the Control Deck.

Battery installation

1.  Make sure control deck is turned off or in auto off mode.
2.  Remove battery box cover by Phillips’s head screwdriver.
3. Insert 4 AAA alkaline batteries in the battery box as illustrated making certain that negative (-) and positive (+) poles are positioned properly.
4. Replace battery box cover – be sure not to over-tighten the screw.

Warning – battery operated

Battery safety notice:

1. Non-rechargeable batteries are not charged.
2. Rechargeable batteries are to be removed from the device before being charged (if removable).
3. Rechargeable batteries are only to be charged under adult supervision.
4. Do not mix old and new batteries.
5. Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
6.  Only batteries of the same or equivalent types, as recommended are to be used.
7. Batteries are to be inserted with the correct polarity (+ and -).
8. Remove batteries before storing.
9. Exhausted batteries are to be removed from the device.
10.  Always use alkaline batteries.
11.  Do not dispose of batteries in are, batteries may explode or leak.
12. The supply terminals are not to be short-circuited.

Connecting game console to TV

1. Connect HDMI cable (included) to tv and game console (make sure the devices are off).
2. Connect Micro USB cable (included) to tv or USB power adaptor (not included).
3. Press Power button on top of Game Console to power ON. The power indicator light on top of Game Console will light up. RED and then TV will enter the game.

NOTE: Make sure your TV is on the correct HDMI auxiliary input and set with 16:9 scale.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation of the device.

Epilepsy warning

A very small percentage of individuals may experience epileptic seizures or blackouts when exposed to certain light patterns or flashing lights. Exposure to certain patterns or backgrounds on a television screen or when playing video games may trigger epileptic seizures or blackouts in these individuals. To reduce the risk of such a seizure incident, it is recommended to take a 10–15-minute break at each hour of playing.

Pairing your control deck to game console

1. Turn ON the power switch on the Control Deck.

2. Press Power Button on top of Game Console to power ON. The power indicator light on top of Game Console will light up RED and then TV will enter the game.
   NOTE: Make sure your TV is on the correct HDMI auxiliary input and set with 16:9 scale.

3. The LED of Control Deck will change BLINKING to SOLID when paired.

4. If the units fail to pair, turn them both OFF and repeat Step 1-3 again or refer below “Pairing Mode”.

LED light indication

*Show flashing LED during game play indicates low battery, recommend replacing batteries.
Pairing mode:
If Game Console & Control Deck cannot be paired, please hold Player 1 & 2 buttons at the same time then turn ON the power switch of Control Deck. Once connected successfully, indicator light will light up SOLID RED.
Sleep mode:
Control Deck goes to sleep mode after 10 minutes of inactivity. (press any button to wake up Control Deck or turn OFF the power switch to conserve batteries for future play).

Assistance or service:
If you have questions regarding your Arcade1Up product or require technical support, contact Arcade1Up Customer Service at www.Arcade1Up.com and click on “Support”.
Caution: Servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

Game controls

Arcade may take 10-15 seconds to power on after switching on.

1. Roll trackball up and down to scroll through game list.
2. Press a button to choose game.
3.  Follow game controls bellow for each game.
4. Hold player 1 (5 seconds) to return to menu and to save a high score.
5. Hold player 2 (5 seconds) to reset game.

Troubleshooting

*Game Console is not plugged in via the Micro USB cable (Included).

*Game Console HDMI is not connected to TV or on correct TV input source.

| *Press button on top of Game Console to turn ON.

*Make sure the Game Console is plugged into a 5V power supply via the Micro USB cable (Included).

*Make sure the HDMI cable is connected to your TV and make sure your TV is on the correct input

source.

Control Deck will not turn ON.| *No batteries in battery compartment on Control Deck.

*Batteries are out of

power.

| *Insert batteries 4 “AAA” on side of

Control Deck.

*Replace to new batteries.

*Slide ON/OFF Switch located on

Control Deck to the ON position.

 | *ON/OFF Switch is in the OFF position.

*Batteries are inserted incorrectly.

| *Make sure batteries are to be inserted with the correct polarity.
---|---|---
Control Deck will not pair to the Game Console.*| Control Deck** needs to be re-paired to the Game Console.| *If Control Deck and Game Console cannot be paired, please hold Player 1 & 2 buttons down at the same time then turn ON the power switch of the Control Deck. Once connected successfully, indicator will light up

SOLID RED.

J o ystick, Spinner, or Trackball are not responding. Control Deck indicator light is

slow flashing.

| *Batteries* in the Control Deck battery compartment are getting low and need to be replaced.| Replace batteries in the Control Deck battery compartment with 4 new “AAA” batteries.
Game will turn ON, but there is no sound.| Volume Switch is in the OFF position.| Slide** Volume Switch located on Control Deck to the right.

NOTE: slide volume switches up to increase volume, down to lower

volume.

The game screen is frozen.| *The game* encountered a problem when processing the data.| You** may need to RESET the game. Turn the ON/OFF switch to the OFF position and then back ON again on both the Game Console and Control

Deck.

One of the buttons on the Control Deck is stuck in the down position.| *Debris* may have gotten between the button and the button housing.| Take something thin (like a business card) and place it between the button and the button housing and slide it back and forth to loosen the debris.
You are not able to scroll through the games on the game selection menu.| You may be using the wrong joystick or pressing the incorrect buttons to scroll through the games.| Look at the game control section in the instruction manual to make sure you are using the correct joystick or pressing the correct buttons to scroll through the game selection menu.
You can scroll through the games on the game selection menu, but you can’t enter a game to begin playing.| You may be pressing the wrong button to enter the game.| Look at the game control section in the instruction manual to make sure you are pressing the correct button to enter the game.
You have entered the game, but you can’t get the game to start.**| *You may be pressing the wrong button to start the game.

*Your TV does not support 1366 x 768 resolution.

| *Look at the game control section in the instruction manual to make sure you are pressing the correct button to start the game.

*Try to connect to other TV (1080p or higher).

You have entered the game, but you can’t exit the game to get back to game selection menu.| *You may be pressing the wrong button to exit the game.

*You may not be holding down the exit button long enough.

| *Look at the game control section in the instruction manual to make sure you are pressing the correct button to exit the game.

*Make sure you are holding the exit button down for 5 seconds to exit

the game.

---|---|---
The control functions that are printed on the Control Deck do not match the gameplay on the screen for the game you are playing.| *You may* be pressing the wrong game control buttons for the game you are playing.| Look** at the game control section in the instruction manual to make sure you are pressing the correct game control buttons for that game.

*Look at the game control loading screen on the monitor to make sure you are pressing the correct control buttons. NOTE: The game controls that are printed on the control deck are only for the feature cabinet game. The other games in the cabinet will utilize the same buttons but react differently.

The game will not let me select 2 or 3 players for a chosen game.| *The game* may only be a 1 or 2 player game.| Refer** to the game control section in the instruction manual to see how many players can play that game.

Collect them all

Colours, style, and decoration may vary.

Visit www.arcade1up.com to sign up for our mailing list and see a complete list of games.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza | Alza.co.uk
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz
• alza.de
• alza.hu
• alza.sk
• Arcade1Up | Officially Licensed Arcade Cabinets

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>