ARCADE 1UP 199804 Capcom Legacy Edition Arcade Cabinet User Manual

1UP 199804 Capcom Legacy Edition Arcade Cabinet
User Manual

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to  the safety instructions. If you have any questions or comments about the device, please contact the customer line.
✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer
Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

Read before using the Arcade1UP

Safety precautions
The following symbols are used in labels on the game to draw attention to potentially hazardous situations:
WARNING: Failure to avoid the risk may result in death or serious injury. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Electrical Shock Hazard. Disconnect the power before removing the cover. Should only be done by a qualified technician.

1. Please read and comprehend all warnings stated in this manual.

2. Do not get the arcade wet when cleaning.

3. Parents and guardians: Please read the entire manual before allowing gamers to play.

4. The AC/DC adapter and apparatus shall not be exposed to dripping or splashing and no object filled with liquids, such as vases, shall be placed on the apparatus.
   The AC/DC adapter is used as a disconnect device.
   The AC/DC adapter of the apparatus should not be obstructed OR should be easily accessed during intended use. To completely disconnect the power input, the AC/DC  adapter of the apparatus shall be disconnected from the mains.

5. If the appliance is provided with protective earth terminal, it should be connected to the main outlet with a protective earth connection.

6. Minimum distances of 10 cm / 3.94 inches around the apparatus for sufficient ventilation.

7. The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.

8. No naked flame sources such as lighted candles should be placed on the apparatus.

9. The apparatus should only be used in moderate climates.

Warning the epilepsy
A very small percentage of individuals may experience epileptic seizures or blackouts when exposed to certain light patterns or flashing lights. Exposure to certain patterns or backgrounds on a television screen or when playing video games may trigger epileptic seizures or blackouts in these individuals. To reduce the risk of such a seizure incident, it is recommended to take a 10–15-minute break at each hour of playing.
WARNING: Arcade1UP assumes no liability for improper installation or excessive loads placed on screws or brackets. This wall anchor is not a substitute for proper adult supervision.

Important safety instructions

1. Read these Instructions.

2. Keep these Instructions.

3. Heed all Warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged,  liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

14. Use only with a riser specified by the manufacturer or sold with the apparatus.
    When a riser is used, use caution when moving the riser/apparatus combination to avoid injury from tip-over.

15. The equipment shall be used at a working ambient temperature of 32° – 95°F (0° – 35°C).

Installation

This game is designed for indoor and personal use only. It must not be installed outdoors. The following conditions must be avoided.

1. Direct exposure to sunlight, high humidity, direct water contact, dust, high heat, or extreme cold.
2. Vibration. The game must be installed on a level surface. Do not install in an area such that the game would present an obstacle in case of an emergency (i.e., near fire equipment or emergency exits).

Specifications

This product is intended for use only with the adapter provided:
Blue Iron Holdings Ltd., Model BI36-120300-E2
Power supply: AC/DC Adapter

48.26 x 57.80 cm)

The AC/DC adapter is used as a disconnect device.
The AC/DC adapter of the apparatus should not be obstructed OR should be easily accessed during intended used.
To completely disconnect the power input, the AC/DC adapter of the apparatus shall be disconnected from the mains.

Assistance or service

Before contacting us for assistance or service, Please check the “Troubleshooting” section in the User Manual. If you still have questions regarding your Arcade1Up product or require technical support.
Contact Arcade1UP Customer Service at www.arcade1up.com and click on “Support”.

Settings

1. Move joystick to scroll through game list.
2. Press player 2 to enter settings.
3. Move joystick to adjust settings.
4. Select “Save & exit” then press player 1.
5. Select “Reset to defaults” then press a button to return the game to its original state.

CAUTION: Servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

Game controls

*Arcade may take 10-15 seconds to power on after switching on.

1. Move joystick to scroll through game list.
2. Press player 1 to choose a game.
3. Follow the game controls below for each game.
4. Hold player 1 (5 seconds) to bring up the pause menu.
5. Hold player 2 (5 seconds) to reset the game.

To enjoy a safe gaming environment
Please use the wall anchor kit that is included with the product.

WARNING

Serious or fatal crushing injuries can occur from furniture tip-over.
To help prevent tip-over:

• Set upArcade1UP on a level floor.
• Never allow children to climb or hang on products.
• Always set up an anti-tip device!
  Use of tip-over restraints may only reduce, but not eliminate, the risk of tip-over.
  WARNING: Arcade1UP assumes no liability for improper installation or excessive loads placed on screws or brackets. This wall anchor is not a substitute for proper adult supervision.
  Make sure to locate your Arcade1UP on a flat surface.

Troubleshooting

Wires/Plugs are hooked up incorrectly.
ON/OFF Switch is in the OFF position.
Upload the switch on the back of the monitor is in the OFF position.| Make sure the power cord is plugged into the wall outlet and there is power to that outlet.
(Plug other electrical equipment into the power outlet to make sure the outlet normally works.)
Make sure all Wires/Plugs are properly connected and all the way set in as directed in assembly instructions.
Slide the ON/OFF Switch located on the control deck to the ON position. Slide upload switch on the back of the monitor to the ON position.
Game will turn ON, but there is no sound.| Wires/Plugs were hooked up incorrectly.
Volume Switch is in the OFF position.| Make sure all Wires/Plugs are properly connected and all the way set in as directed in assembly instructions.
Slide Volume Switch located on control deck to the right.
NOTE: Push volume slide switch right to increase volume, left to lower volume.
You hear sound but there is no picture.| Wires/Plugs were hooked up incorrectly.| Make sure all Wires/Plugs are properly connected and all the way set in as directed in assembly instructions.
The game screen is frozen.| The game encountered a problem when processing the data.| Turn the ON/OFF switch OFF and then back ON again.
You may need to RESET the game. Turn the ON/OFF switch to the OFF position. Unplug the game from the wall outlet and wait 60 seconds to RESET the game. Plug the game back in and turn the ON/OFF switch back to ON.
---|---|---
Marquee won’t light up.| Marquee’s power cord is not plugged in at the back of the monitor.
Marquee’s power cord is plugged into the wrong input.| Make sure all Wires/Plugs are properly connected and all the way set in as directed in assembly instructions.
The game screen looks pixelated/blurry or there are lines running through the image.| Wires/Plugs were hooked up incorrectly.
Pixel Smoothing may be turned ON/OFF in the settings menu.| Make sure all Wires/Plugs are properly connected and all the way set in as directed in assembly instructions.
Enter the settings menu to see if Pixel Smoothing is turned ON/OFF. You may need to RESET the game. Turn the ON/OFF switch to the OFF position. Unplug the game from the wall outlet and wait 60 seconds to RESET the game. Plug the game back in and turn the ON/OFF switch back to ON.
One of the buttons on the control deck is stuck in the down position.| Debris may have gotten between the button and the button housing.| Take something thin (like a
business card) and place it between the button and the button housing and slide it back and forth to loosen the debris.
You are not able to scroll through the games on the game selection menu.| You may be using the wrong joystick or pressing the incorrect buttons to scroll through the games.| Look at the game control section in the instruction manual to make sure you are using the correct joystick or pressing the correct buttons to scroll through the game selection menu.
You can scroll through the games on the game selection menu, but you can’t enter a game to begin playing.| You may be pressing the wrong button to enter the game.| Look at the game control section in the instruction manual to make sure you are pressing the correct button to enter the game.
You have entered the game, but you can’t get the game to start.| You may be pressing the wrong button to start the game.| Look at the game control section in the instruction manual to make sure you are pressing the correct button to start the game.
You have entered the game, but you can’t exit the game to get back to game selection menu.| You may be pressing the wrong button to exit the game.
You may not be holding down the exit button long enough.| Look at the game control section in the instruction manual to make sure you are pressing the correct button to exit the game.
Make sure you are holding the exit button down for 5 seconds to exit the game.
---|---|---
The control functions that are printed on the control deck do not match the gameplay on the screen for the game you are playing.| You may be pressing the wrong game control buttons for the game you are playing.| Look at the game control section in the instruction manual to make sure you are pressing the correct game control buttons for that game.
Look at the game control loading screen on the monitor to make sure you are pressing the correct control buttons. NOTE: The game controls that are printed on the control deck are only for the feature cabinet game. The other games in the cabinet will utilize the same buttons but react differently.
The game will not let
me select 2 or 3 players
for a chosen game.| The game may only be a 1 or 2-player game.| *Refer to the game control section in the instruction manual to see how many players can play that game.

Collect them all

Colors, styles, and decoration may vary.

Visit www.arcade1up.com to sign up for our mailing list and see a complete list of games.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

• Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
• Damage to the product by a natural disaster, the intervention of an unauthorized person, or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
• Natural wear and aging of consumables or components during use (such as batteries, etc.).
• Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
• If anyone has made modifications, modifications, alterations to the design or adaptations to change or extend the functions of the product compared to the purchased design or use of non-original components.

References

• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.sk – rýchly a pohodlný nákup odkiaľkoľvek | alza.sk
• Arcade1Up | Officially Licensed Arcade Cabinets
• Alza | Alza.co.uk
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz – rychlý a pohodlný nákup odkudkoliv | Alza.cz
• Alza.cz
• alza.de
• alza.hu
• alza.sk
• Arcade1Up | Officially Licensed Arcade Cabinets

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>