Sylvania SP495 Bluetooth Tube Fm USB speaker User Manual

June 5, 2024
SYLVANIA

Sylvania SP495 Bluetooth Tube Fm USB speaker

Sylvania SP495 Bluetooth Tube Fm USB speaker-fig1

SYLVANIA is a registered trademark of OSRAM Sylvania Inc. used under

Thank you for purchasing our products. Please read this product manual carefully before using. We will not be responsible for any personal injury or product damage caused by improper use.

Bluetooth mode

  1. Bluetooth version: Bluetooth 4.2, support for IOS, Android and other devices.
  2. Tum the toggle switch to the ON position, then will enter Bluetooth mode, the speaker will emit Bluetooth tone and the blue LED will be flashing, it goes to pairing mode, the phone will search for the Bluetooth pairing name “Sylvania SP495”, tap it to connect, it will have a tone coming up when the Bluetooth is connected successfully and the blue LED will be solid blue. If required, enter the password ‘0000’ to confirm to pairing.

TF card mode

  1. Insert the TF card after booting, and automatically enter the TF card playback mode.
  2. Pull out the TF card and the speaker will automatically enter Bluetooth mode.

USB mode

  1. Insert the USB flash drive after booting and automatically enter the USB playback mode.
  2. Pull out the USB flash drive and the speaker will automatically enter Bluetooth mode.

Line in mode

  1. Insert the Line in cable after booting, and automatically enter the Line in mode.
  2. Pull out the Line in cable and the speaker automatically enters Bluetooth mode.

FM radio mode

After booting, insert the charging cable into the DC 5V port as an external antenna. Press the M button to enter the FM mode. Press and hold the Pause button to enter the automatic search mode. After the search is completed, press right and left arrow to switch the preset stations.

Charging

  1. Plug the USB cable into the speaker and connect the 5V charger to charge the built-in battery of the speaker.
  2. When charging, the “Charging” indicator lights up red, the red light will be off when the battery is fully charged.

Function parameters

  • Built-in lithium battery voltage: 3. 7V
  • Charging voltage: 5V
  • Frequency response: 60HZ-20KHZ
  • Battery capacity: 1 B00mAh
  • Power: 5Wx2
  • Size: 21 0x96x80 (mm)
  • FM: 87.5MHz-108.0MHz

Packing list

  • Multimedia Speaker 1
  • USB charging cable 1
  • Audio signal cable 1
  • Product manual 1

Product warranty notice

The expiration date of this product from the date of sale, within the validity period, the failure of using this product under normal conditions can be repaired, replaced, returned according to regulations. During the warranty period of the product, you can enjoy the free maintenance service at the speaker authorized technical service center according to the contents of this warranty card.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in are sidential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that maycause undesired operation.

SUPPORT CENTER

  • For service assistance and product information, please call: 1-800-968-9853.
  • Curtis International Ltd.
  • 7045 BECKETT DRIVE, UNIT 15, MISSISSAUGA. ON, L5S 2A3 www.curtisint.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals