SWIT LB-PD65C Panasonic VBR59 Series Battery Pack User Manual
- June 5, 2024
- SWIT
Table of Contents
SWIT LB-PD65C Panasonic VBR59 Series Battery Pack
Thank you for choosing SWIT products, please read this user manual before using and keep it properly for future reference.
Warning
Remember the following precautions to avoid fire and other safety hazards!
- Do not use the battery in a place where there is fire or heat to prevent overheating and rupture.
- Do not Pierce the battery case or attempt to open the case or disassemble the battery.
- Please use and store the battery within the specified temperature range.
- Do not charge the battery in the car or in direct sunlight.
- Do not attempt to use the damaged battery.
- Do not squeeze the shell to cause physical impact.
- Ensure that the power of the electrical device meets the battery specifications.
- Please use SWIT charger or SWIT recommended charger to prevent overheating, rupture and other dangers.
- Keep out of reach of children.
Attention
- If the power indicator light cannot be turned on ,the battery may be in the protected state, connect the charger or rest the battery to try to recover.
- It is normal for batteries to get hot during charging and use.
- Keep the pole of the battery clean to ensure a better use experience
- Keep the battery in a cool and dry place for long-term storage. It is recommended to keep the battery power above 50%.
Product feature
- One both-way Type-c interface can be charged with a Type-c charger.
- One 12V D-TAP output interface can supply power to another device.
- Four-level LED show the percentage of the battery capacity.
- Built-in multiple protective circuit, with temperature, voltage, current all-round protection.
Appearance
- CD Indicator button
- TYPE-C input/output
- Electric pole
- level indicator light
- D-TAP output
Charging Instruction
- Supports using the universal lYPE-C charger, SWIT LC-D421 D, SWIT S-36020 and Panasonic charger to charge.
- When the lYPE-C interface is used to charge the battery, the LED light shows the percentage of the remaining battery (25%,50%,75%,100%) and the D-TAP interface cannot supply power to another device.
- Batteries can be charged in the temperature range of0-40 ° C, but we recommend charging in the temperature range of 10-30 ° C to ensure optimal battery performance.
Discharging Instruction
- TYPE-C interface and D-TAP interface cannot supply power to another device at the same time.
- Please put on the rubber cover immediately after use to avoid dust.
- The battery can discharge in -20°C ~ 50°C;The battery performs best when used in the temperature range of -10 ~40°C.
Indicator light
- When the lYPE-C interface is used to charge the battery,the LED indicator represents the percentage of electric quantity:25%,50%, 75%, 100%.
- When the lYPE-C interface is not used to charge the battery,the LED indicator represents the percentage of electric quantity:25%,50%, 75%, 100%.
Specification
| Model | LB-PD65C |
|---|---|
| Nominal voltage | 7.2V |
| Capacity | 65Wh,9 Ah |
30W,4A
performance parameter
|
Electric poleXI
| Output
Input
Compatibility
| 8.4Vc–4A
Panasonic AU-EVA1,AG-DVX200,AJ-PX298,AG-UX90/180,AG-AC30, AG-DVX100,AG- HVX200,DVC180A,AG-AC8,AG-HPX173 etc.
lYPE-CXl
D-TAPXl
|
Output
| 25W(Max), 5V= 3A,9V= 2.2A,12V= 2.lA,15V= 1.7A,20V= 1.3A
Protocol: l.BCl.2,IOSfQSAMSUN G 2.QC2.0,3.0
3.FCP,SCP
4.PD2.0,3.0
Input
Output
| 25W(Max), 5V= 3A,9V= 2.8A,12V= 2.1 A,15Vc 1.7A,20Vc 1.3A
25W,12Vc 1.7A
Total output power| 30W,4A
69.5X41.2X83.0mm
47.0X77.0X90.0mm
Dimension
Dimension(With carton)
Net weight| 356.5g
Net weight(With carton)| 373.0g
Charging temperature| 0~40°C (suggest 10~30°C)
Discharging temperature| -20°C~50°C (suggest -10~40°C)
Storage temperature| -20°C~50°C