Tesla TSL-AC-AP3006 Smart Air Purifier Pro User Manual

TSL-AC-AP3006 Smart Air Purifier Pro
User Manual

SECURITY NOTE

In order to avoid possible damage to you or others or financial damages, please be sure to pay attention to the following safety precautions.
if the machine’s power supply cord is damaged, you must entrust the manufacturers of the machine, a maintenance service center or qualified technicians will change it for you, in case of any danger.
WARNING
Don’t touch the power plug with wet hands. No wet hands! Otherwise, it may cause electric shock.
It is prohibited to use beyond the power or connected devices’ specified value. Only 220V ac power is allowed. Banned! Using a universal socket or exceeding the specified value of the equipment may cause overheating and fire accidents.
Before cleaning appliances, please make sure to have them powered off. Pull the plug! Otherwise, air purifiers may run suddenly, causing accidents getting an electric shock. Before starting the air purifier, please insert the plug completely into the socket. Failure to be fully inserted into the socket may cause electric shock and overheating or fire accidents.
No damage to the power line and socket. Banned! In the use of the machine, don’t bind, wires. Using the broken wire may cause electric shock, short circuit or fire accident. Ban cut, modification, excessive distortion, torsion, pull wire or put weight on wires or plugs.
Prohibit unauthorized apart or modified the air purifier. Banned take apart Otherwise it may cause electric shock, failure or fire accident.
Please clean the power plug regularly. Accumulation of dust on the power plug and moisture can damage the insulation of the plug part, resulting in a fire accident. Pull out the power plug, then wipe with a dry cloth (ban using wet cloth!). Remember to pull the power plug if not used for a long time.
Ban rod or other metals placed in the outlet or inlets. Banned! Otherwise, it may affect the internal parts and cause electric shock or damage.
ATTENTION
Any situation as below, please turn off the power of the machine.

• A switch does not work.
• A circuit breaker or fuse burned.
• The power cord or plug abnormal fever.
• Finding the burning odor or abnormal sound or vibration.
• Any other anomalies or failures.

WARNING
Prohibited use solvent such as benzene or thinner to clean air purifier, avoid touching with insecticide spraying. Banned! Otherwise, air purifiers can rupture and cause damage, even short circuits, no which cause electric shock or fire accidents.
Ban place for fat particles using this air purifier. Banned! Such as inside the kitchen, can reduce the service life of the air purifier filter. The air purifier should not be used for ventilation or extraction equipment.
Banned use of the air purifier indoors with fumigation-type pesticides. Banned! The chemical residue could be accumulated inside the machine, and then release from the outlet to harm health. After using pesticides, please let the thoroughly ventilated room, before using the air purifier.
The wet body is prohibited. No wet! Otherwise, it may cause a short circuit, or wire, and cause fire or electric shock accident, or injury.
Pull out the power plug, should hold the plug, instead of pulling wires. Otherwise, it may cause a short circuit, or wire, and cause fire or electric shock accident, or injury.
Banned in high temperature, damp or wet body sites using this air purifier, such as the bathroom. No wet! Air purifiers may leakage cause electric shock or fire accidents.
Do not put volatile substances or combustible materials, such as tobacco or mars to float into the machine. Away from the fire! Away from the fire! Otherwise, it may cause a fire accident.
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

PRODUCT INTRODUCTION

CONTROL PANEL

OTHER ITEMS IN PACKING
AIR QUALITY INDICATOR
Blue ( PM2.5 = 0 – 50 ) Perfect
Green PM2.5 = 50-100 ) Good
Purple PM2.5 100-150) Normal
Red ( PM2.5 =150- ) Bad

Notice: Please press the restoration button, if you want to turn off the air quality indicator light. (PM2.S digital display just for reference)

BEFORE USE

RECORD THE BEGINNING USE DATE IN THE LABEL In order to replace the filter on time, before using the air purifier, please keep the date recorded on the back of the nameplate, thus to achieve the best performance.

TI PS
After removing the plastic package of each filter, the efficient HEPA filter and activated carbon filter must be replaced once a year.
To know the air quality indicator air quality conditions, please refer to the specific pages 6 and page 14.
Method of dismounting and installing the air inlet panel

1. Method of removing the air inlet Panel. Hold on to the groove at both sides of the air inlet panel, then gently pull it up.

Method of installing the air inlet panel. Reinstall the air inlet panel, alignment and insert it into the fixed groove, and then gently push it up.
Placement sites of air purifier
In order to make your room air achieve a good effect on both sides of the cycle, ensure the gap between the air inlet and the wall is at least 50 cm, and the air outlet is at least 10 cm. Please keep 1 meter away from television, radio, etc. Please do not put the power plug together with the television, radio, and other electrical power plug inserted into the same socket, (otherwise, it may cause screen jitter and noise generated.)

• The long-term placement in the same sites may dirty the host walls.
• To ensure the machines have adequate ventilation and maximum efficiency, don’t interfere with the air outlet and air inlet.

INSTALL FILTER
Information
Please remove all the packages of all the filters in the machine before using the air purifier, according to the below instruction.
ATTENTION

• Please make sure the power plugs have been put off before installation, maintenance, and transportation.
• Please do not operate the air purifier without the filters.
• Please remove the package of each filter before using it.

TI PS
You can put the purifier on the wall to enhance the stability when removing or installing the filters.
STEPS
For initial use of this air purifier, please install the filters correctly as per the below instructions.

1. Please remove all packages and put the purifier on the dry, stable, horizontal ground.| 2. Hold on to the grooves at both sides of the air inlet panel, then gently pull it up.
---|---
|
3. Take out all filters from this purifier.| 4. Remove all packages.
|
5. Install all the filters in order.| 6. Install the pre-filter as instructed.
---|---
|
7. Install the air inlet panel again. Align and insert it to the fixed grooves, then gently push it.

FILTERS AND FUNCTION

4 points purification system, could effectively purify the air, and make life more healthy. One: Pre-filter Two: Efficient HEPA filter Three: Activated carbon filter Four: UV lamp

TIPS
Please be careful when installing the air inlet panel.
ONE: PRE-FILTER
Use micron mesh filter, effectively block 2.5mm fibrous particulate matter, Blocking rate > 99.9%. It can be cleaned easily tens of thousands of times. Preventing larger particles such as pet fur, dander, coarse dust, etc. Can increase the life of the following filters.
TWO: EFFICIENT HEPA FILTER
The rate of removing the minor particles small to 0.3 microns from the airflow can be up to 99.9%. Spread of allergens and bacteria in air flow, such as pollen, smog, and viruses.
THREE: ACTIVATED CARBON FILTER
Removing volatile organic compounds, such as secondhand smoke and kinds of polluting gases.
FOUR: UV LAMP
Effectively kills a variety of common bacteria and viruses, and inhibits the production of bacteria and viruses.

TIPS
Cold cathode UV lamp trigger voltage is only 500V, will not produce ozone, and can use safely.
THE ALLERGEN

HOW TO USE

CONTROL PANEL

PLUG IN THE POWER
Plug in the power. The music starts and all the lights flash 3 times continuously, then all the lights off, leaving only the power indicator light in red, enter standby mode.

S TARTING AIR PURIFIER
Press the power button to enter into the auto mode with the lights on.
When the machine starts, the air quality indicator light will be slow Hashing on, it begins to detect the air quality after preheating for 5s.
When auto mode starts, it will detect the air quality automatically.
AIR QUALITY INDICATOR
Blue ( PM2.5 = 0-50) Excellent
Green ( PM2.5 = 50-100) Good
Purple ( PM2.5 = 100-150) Bad
Red ( PM2.5 =1500 Very Bad

Notice: Please press the restoration button, if you need to turn off the air quality sensor light.
AUTO MODE
Turning the power on it will detect the air quality automatically. Choosing the auto mode will give you the most appropriate fan speed.
SLEEP MODE
Sleep mode, has a built-in radial sensor, which will sense the strength of the light, if the light intensity is under the condition of insufficient, all lights of the machine will be dimmed, and at the same time, the machine automatically changes to a silent mode of operation, do not disturb your rest at night.
WIND SPEED ADJUSTMENT
Wind speed can be selected in one, two, three, or four grades.
TIMING FUNCTION
Tap this key to switch the timing between LH, 4h, and 8h.
WIFI FUNCTION
Press and hold 5 seconds the mode button for to turn on the WIFI function within 5 seconds after turning on the machine.
UV FUNCTION (NEGATIVE ION FUNCTION)
Press the UV button to open the UV lamp. Press and hold for 5 seconds to tum the ionizer function on or off(the ionizer function automatically open when the machine power is on)

RESET
Reset the machine by pressing the button for at least five seconds, (This function is only available after the replacement reminds of the filter.).
AIR QUALITY INDICATOR
Flip this button to open/close the air quality color indicator.

CLEANING AND MAINTENANCE

Be sure to pull out the plug before cleaning. Do not put the product into water or any other liquid. Do not use corrosive or flammable gas (e.g. bleach or alcohol) to clean any part of the product. Only pre-filter can be cleaned with water, other filters can’t.
CLEAN AIR PURIFIER
Clean the medial and lateral regularly to prevent dust accumulation. Luse a soft dry cloth to wipe the dust. 2. use a soft dry cloth to clean the inlet and outlet.
CLEAN AIR QUALITY SENSOR
Clean the air quality sensor every two months to make sure the purifier runs at the best performance. If the purifier is used in a dusty environment, please clean it more often. ATTENTION
When the indoor humidity is very high, the air quality indicator may be forming condensate. So even if the air quality is good, the air quality indicator may also indicate poor air quality, in this case, you have to clean the air quality indicator or use any manual speed setting.

1. Use a soft brush to clean the inlet/outlet of the air quality sensor.
2. Remove the protective cover of the air quality sensor.
3. Clean the air quality sensor, inlet, and outlet with wet cotton swabs slightly.
4. Dry it with dry cotton swabs
5. Remount the protective cover of the air quality sensor.

CLEAN THE PRE-FILTER INFORMATION
In order to achieve the best performance, clean and maintain the Pre-filter every two months (about 480 hours) from the beginning to use. Based on the average 8 hours a day, 7 days a week frequency, keep the machine working in the household environment. External maintenance: use a wet cloth(or mild detergent)to wipe the surface to prevent the accumulation of dust. Turn off the air purifier and pull out the plug before cleaning and maintenance. Only the pre-filter can be cleaned, other filters can’t.
ATTENTION
Please use the low-power vacuum cleaner, to prevent the filter from being damaged.
TIPS
Before putting each filter into the machine pls remove the plastic packaging, and ensure that the labels on the filters are outwards.
OPERATION STEPS

1. Turn off the power to stop the air purifier.

   ---

2. Pull out the power plug.

3. Hold on to the groove at both sides of the front panel and pull it outward. Then remove it upward

4. Removed the protruding part of the gauze filter before cleaning it.

5. Use a soft brush or a vacuum cleaner to remove particles, please use water or soap water to clean the filter, then place it into the machine when it is completely dry.

6. Put back the pre-filter into the air purifier.

7. Re-install the front plate, align and insert it into the fixed groove, then gently pushed it up.

8. Plugin.

9. Turn on the power and start the air purifier.

REPLACE FILTERS
A reminder of filter replacement comes when the machine is normally working for more than 1600 hours, and the power lights flash slowly (the red lights flashing when standby, the blue lights flashing when it is working). After the indicator light of replacement of the filter shows, the machine can still work.
ATTENTION
Please turn off the power and pull out the power plug before replacing the filter.
TIPS
Remove all the plastic packaging of each filter before put into the machine, To ensure the filter label is outward.
OPERATION STEPS

1. Reminding to replace the filter.

2. Take off all filters inside.

3. Turn off the power, then pull out the power plug.

4. Remove all the plastic packaging of the filters, and put them back into the purifier.

5. Hold on to the grooves of both sides of

6. Put back the pre-filter into the front panel, then gently pull it up. purifier.

7. Re-install the front panel, keep alignment, and inserted it into the fixed groove, then gently push it up.

8. After replacing the filter, plug-in power, hold on to the reset button for 5 seconds, then the machine resets.

UNUSED FOR A LONG TIME
Pull out the power plug. (because the power consumption happened when t is on standby.) Thoroughly dry the inside. (otherwise, it may lead to equipment trouble.) Store the machine in a dry ventilated place. (lay flat or place upside-t down may lead to the product trouble.)
REPLACE FILTER REFERENCE TIME
When the total machine work time reaches to 1600hours, the machine will notice to change the filter. The power indicator will flash ceaselessly(one time per second). The red light showed when it is on standby, the blue light showed when it works. But the machine still can work when getting the notice of changing the filter.
TIPS

1. Considering your and your family’s health, please change the filter screen in time.
2. After sealing off the filter, if the usage time is shortened. But suggest changing one time per six months.
3. After sealing off filters, the filter should be changed one time per 12 months.

ATTENTION
Please turn off or Pull out the plug, before you change the filter.

FAULT HANDLINE

This chapter lists the possible problems when using this product. If you can’t solve the problems based on the below information, please contact our customer center or dealers.

the front panel, then install the panel again.
The power plug is not inserted into the power source.| Pull out the power plug, then insert it into the power source.
The power plug or wire is damaged.| Contact our customer center or dealers.
The fan doesn’t work| The machine is not turned on.| Insert the power source, and turn on the machine again.
The dynamo is damaged.| Contact our customer center or dealers.
The machine is put in an uneven place.| Remove the machine to the flat place.
Loose or foreign particles inside the machine.| Contact our customer center or dealers.
The motor is loose.| Contact our customer center or dealers.
The plastic packaging of each filter is not removed.| Before using, please remove the plastic packaging of each filter. Please clean the cleaning mesh filter.
Performance is poor or not the best purification ability| The washable mesh filter is dirty.| Replace one set of new filters.
The filter is not replaced.| Replace one set of new filters.
The machine inlet or outlet was blocked.| Contact our customer center or dealers.
The plastic packaging of each filter is not removed.| Before using, please remove the plastic packaging of each filter.
The gap around the machine is not proper.| To ensure the machine has at least 50 cm clearance on both sides of the air inlet and the outlet at the back of the machine at least 10 cm.
Machine filter missing or sequence error.| To ensure that all the filters put the correct sequence in the machine.
Exceed the expected cover area.| To ensure the machine work in a suitable area.

WARRANTY AND SERVIS
If you need to understand information or have any questions you can also contact our customer service center or dealer.

ADDITIONAL N FORMATION

PARAMETERS
Model: AP2006
Rated Voltage: 220-240V
Rated Frequency: 50Hz
Rated power: 23W.
CADR: 210m3/h
Noise: <54dB
Weight: 5.2kg
Model: AP3006
Rated Voltage: 220-240V
Rated Frequency: 50Hz
Rated power: 33W.
CADR: 360m3/h
Noise: <65dB
Weight: 7kg
Model: AP6006
AP6006:
Rated Voltage: 220-240V
Rated Frequency: 50Hz
Rated power: 66W.
CADR: 510m3/h
Noise: <68dB
Weight: 10kg

WIFI USE GUIDE

1. Scan the QR code specified above, and download and install the Tesla Smart APP.

2. Open the Tesla Smart APP and choose to create a new account or log in directly.

3. Click the”+” sign in the upper right corner to add the device.

4. Select „small home appliance- air purifier”; Turn on the air purifier, and press „MODE” to enter the distribution network mode within five seconds, see the WIFI indicator on.

5. Enter the WIFI password and click ok.

6. Click „Fast flashing”;
   Note: please ensure that the mobile phone and air purifier are in the same WIFI environment;

7. Wait for the device connected to complete.

8. “Add device success” appears to indicate that the device connection was successful.

9. Click Finish to enter the control interface to control the machine.

   ---

INFORMATION ABOUT DISPOSAL AND RECYCLING
This product is marked with the symbol for a separate collection. The product must be disposed of in accordance with the regulations for disposal of electrical and electronic equipment (Directive 2012/19/EU on waste electrical and electronic equipment). Disposal together with regular municipal waste is prohibited. Dispose of all electrical and electronic products in accordance with all local and European regulations at the designated collection points which hold the appropriate authorization and certification in line with the local and legislative regulations. Correct disposal and recycling help to minimize impacts on the environment and human health. Further information regarding disposal can be obtained from the vendor, authorized service center, or local authorities.
EU DECLARATION OF CONFORMITY
Hereby, Witty Trade s.r.o. declares that the radio equipment type AP2006, AP3006, and AP6006 is in compliance with EU directives. The full text of the EU declaration of conformity is available at the following internet address: teslasmart.com/declaration
Connectivity: Wi-Fi 2,4 GHz IEEE 802.11b/g/n
Frequency band: 2.400 – 2.4835 GHz
Max. radio-frequency power (EIRP): < 20 dBm

  manufacturer
Tesla Global Limited
Gee Chang Industrial Building,
121 Des Voeux Road Central
852 00 Hong Kong
www.teslasmart.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>