TESLA TSL-SEN-SIREN Smart Sensor Siren User Manual

June 5, 2024
Tesla

TESLA TSL-SEN-SIREN Smart Sensor Siren

TESLA TSL-SEN-SIREN Smart Sensor Siren-PRODUCTPacking List

Check if the product is in good condition. Make sure it contains the below accessories.

  • 1X Alarm Siren
  • 3M sticker x1
  • power adapter x1TESLA TSL-SEN-SIREN Smart Sensor Siren-2
  • QC PASS certificate x1
  • User manual x1TESLA TSL-SEN-SIREN Smart Sensor Siren-3
  • Two expansion tubes and two screws

Appearance and Components Basic Functions

Product Appearance

TESLA TSL-SEN-SIREN Smart Sensor
Siren-4Product Features

  1. Sound&flash alarm for 100 dB.
  2. Low voltage monitoring and indication function.
  3. Periodically sends online reports to the gateway.
  4. Anti-tamper design.
  5. Wireless transmission, easy to install.
  6. ABS material housing is radiation-resistant and heat-resistant.
Power-On and External Power Supply
  1. First time power on, LED is on for 3 s.
  2. When battery power, press the OFF/ON button for more than 3s to turn OFF/ON.
  3. Network setting /exit setting: press both volume + and volume- at the same time for more than 5s.TESLA TSL-SEN-SIREN Smart Sensor Siren-5 Note: When receiving an alarm signal from the gateway, the status indicator will flash and the buzzer beeps. To clear the alarm, please operate on App.

Basic Functions

  1. Network setting: press the volume + and volume buttons at the same time, the red light will be on for 5s. Release the button to set network, LED flashes for network setting. LED is always on for 3s then off. If failed, the LED will be off directly.
  2. Volume adjustment: When the siren alarms, press the volume + and – to adjust.
  3. Anti-tamper switch. When siren is removed, siren will alarm. To cancel the alarm, please press anti-tamper switch for 3 times, or operate on App.
  4. LED Indicator
    • Power on/off: LED is on for 3s, buzzer beeps twice.
    • Low voltage: LED flashes every 20s.
    • Network setting: LED flashes.
    • Power off: Buzzer beeps once.
    • Network timeout: LED changes from flash to off.
    • Network setting success: LED is on for 3 seconds and off.
Installation Position and Precautions
  1. Install the product on an indoor tile, gypsum wall, or painted wood.
  2. Building materials, such as reinforced concrete, will shorten the wireless communication distance.

Product Installation

Add the siren to the gateway as an accessory based on the gateway user manual.

  1. Rotate the mounting base counterclockwise to remove it from the product.
  2. Power on the product.
  3. Use expansion tube and screws or a 3M sticker to fix the mounting base on a wall. Rotate the product clockwise into the mounting base. If you use a 3M sticker, ensure that the installation surface is smooth and stable. Clean the surface before mounting to prevent the product from falling off.TESLA TSL-SEN-SIREN Smart Sensor Siren-9
  4. Connect the siren to the power adapter.

Technical Parameters

Wireless Technology ZigBee
Working Voltage 12 V (power adapter)
Transmission Frequency 2.4 GHz
Working Temperature -10°C to +55°C
Built-in Battery 3.7 V lithium battery
Standby Time Over 24 hours
Relative Humidity < 90%
Dimensions Ø80 mm x 34.5 mm

INFORMATION ABOUT DISPOSAL AND RECYCLING

This product is marked with the symbol for separate collection. The product must be disposed of in accordance with the regulations for disposal of electrical and electronic equipment (Directive 2012/19/EU on waste electri-cal and electronic equipment). Disposal together with regular municipal waste is prohibited. Dispose of all electrical and electronic products in accor-dance with all local and European regulations at the designated collection points which hold the appropriate authorisation and certification in line with the local and legislative regulations. Correct disposal and recycling help to minimise impacts on the environment and human health. Further information regarding disposal can be obtained from the vendor, authorised service centre or local authorities.

EU DECLARATION OF CONFORMITY
Hereby, Witty, s.r.o declares that the radio equipment type TSL-SEN-SIREN is in compliance with EU directives. The full text of the EU declaration of conformity is available at the following internet address: teslasmart.com/declaration
Connectivity: Wi-Fi 2,4 GHz IEEE 802.11b/g/n
Frequency band: 2.412 – 2.472 MHz
Max. radio-frequency power (EIRP): < 20 dBm

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals