SYLVANIA SP611-B-BLACK Bluetooth Pulsing LED Speaker User Manual

June 5, 2024
SYLVANIA

SYLVANIA SP611-B-BLACK Bluetooth Pulsing LED Speaker User Manual

DEAR CUSTOMER

In order to achieve the best performance of your product, please read this instruction manual carefully before using, and keep it for future reference.

NOTE

This unit may be submitted to changes in specifications, characteristics and/or operation without prior notice to the user, in order to continue improving and developing its technology.
For service assistance and product information, please call: 1-800-968-9853.
Pour obtenir assistance et information appelez: 1-800-968-9853. Curtis International Ltd. 7045 BECKETT DRIVE, UNIT 15, MISSISSAUGA, ON, L5S 2A3 www.curtisint.com

Packing list

Upon opening the package, please check for the following items:
1 x Speaker
1 x USB charging cable
1 x Audio cable
1 x Instruction manua

Specification

Power output: 10W
Input: DC 5V
Drivers: 4”Full Range
Battery Capacity: 1500mAh
Transmission Distance: 10m
SYLVANIA is a registered trademark of Dimension(WxHxD): 310 x 132 x 129 mm

Product overview

  1. ON/OFF
  2. TF card slot
  3. Charging Port ( DC 5V micro USB for charging)
  4. Previous track (Short Press: Previous track, Long press: Volume down)
  5. Next track (Short Press: Next track, Long Press: Volume up)
  6. Play/Pause (Short press to play/pause the song, long press to scan all stations and store automatically.)
  7. Mode ( Switch among BT, Micro TF, USB, Aux-in mode and FM radio, Long press to switch off the LED light.)
  8. AUX-IN jack
  9.  USB port
  10. Microphone input jack

Charging

There are two ways to charge the speaker

  1. Plug the charging cable into speaker and connect to another USB power source like PC/MAC, etc.
  2. Use the AC adapter to charge(Adapter not included). Please turn off the speaker when charging

Indicator Status

Type LED indicator State

BT indicator

| Rapid flashing blue| Ready to pair
Solid blue| Linked to Paired
Blue LED flashing slowly| AUX-in mode

Battery indicator

| Red light normally on| Charging
Red light off| Fully charged

Features

USB, TF, AUX-IN, BT, FM radio, Karaoke, Flash Light show, rechargeable battery, Volume +/-, Play/Pause, Previous/Next track

Connecting

BT connection
Slide power key to ON position The speaker BT indicator will

flash in Bluetooth pairing mode, turn on your BT devices or cellphone, select “Syl SP611”in the list BT indicator will stop
flashing after the speaker is paired to the BT device successfully. Now it can play the music from the cellphone.

Connect to audio from the cellphone/Pad/Computer/Notebook/DVD/CD etc.
Plug one end of the audio cable into the speaker and the other end into a cellphone or other audio device, the unit will cut in
AUX mode immediately, the LED indicator light will flash blue slowly. Press and hold the next/previous buttons to increase or decrease the volume.

FM Radio

Press the M button to enter FM, the LED indicator light will flash blue slowly.
Long press Play/Pause button to start channel auto searching, the BT indicator will flash blue rapidly. Long press Play/Pause button again to pause searching, the BT indicator will flash blue slowly.
Press M button again to exit FM radio, the BT indicator will flash blue rapidly and BT is ready to pair.
Under playing mode, short press: “Play/pause” button to auto search the FM Channel and store it automatically.
Press Previous or Next button to change the stored FM channel.
Connect to the USB charging cable will improve the FM receiving.
Note: Insert the USB charging cable as an antenna that will be improved the FM sensitivity.

USB, TF, mode

Insert the USB or TF card to this unit, it will switch in automatically, and press the play/pause button to play the music and press the next/previous button to select the song.

Lignt Control

Long press M (mode) button at list 3seconds to turn off or turn on the flash light.

FAQ:

  1. Unable to turn on the speaker
    Make sure the battery is full and the battery indicator light is on.

  2. Unable to connect to BT-enabled device
    Make sure that the device is in BT mode, and is within 10 meters from the speaker.
    Ensure that neither the speaker nor the device is blue-con nected to any other devices.

  3. No sound heard
    The volume is at its lowers, please turn up the volume.

  4. Button doesn’t work Please press button longer

  5. The speaker has no response Please power off and try

Do’s and Don’ts

Don’t use abrasive cleaning solvents to clean the speaker. Do not expose the speaker to extremely high or low tempera- ture as this will shorten the life of electronic devices, distorting certain plastic parts.
Don’t dispose of the speaker in a fire as it will result in an explosion.
Don’t expose the speaker to contact with sharp objects as this will cause scratches and damage.
Don’t attempt to disassemble the speaker as it may get damaged if you are not professional.
Do not expose the speaker to heat or fire. Avoid storage in direct sunlight.
Do not subject the speaker to mechanical shock. Do not add any fluids or solids to your speaker.
Do not use the speaker if it has been damaged in any way.

FCC STASTMENTS:

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving
  • Increase the separation between the equipment and

-Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.
-Consult the dealer or an experienced radio/TV technician for

help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Opera- tion is subject to the following two conditions:

  • this device may not cause harmful interference, and
  • this device must accept any interference received, including interference that may cause undesired

To make a warranty claim, do not return this product to the store. Please email support@curtiscs.com or call

1-800-968-9853.

90 day Warranty

This product is warranted to be free from defects in material and workmanship for a period of ninety (90) days from the date of original purchase. During this period, your exclusive remedy is repair or replacement of this product or component found to be defective, at our option; however, you are respon- sible for all costs associated with returning the product to us. If the product or component is no longer available, we will replace with a similar one of equal or greater value. Prior to a replacement being sent, the product must be rendered inoperable or returned to us.
This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions., or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt, as proof of purchase is required to make a warranty claim. This warranty is void if the product is used for other

help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s than single-family household use or subjected to any voltage and waveform other than as on the specified rating on the label (e.g., 120V~60Hz).

We exclude all claims for special, incidental, and consequen- tial damages caused by breach of express or implied warran- ty. All liability is limited to the amount of the purchase price. Every implied warranty, including any statutory warranty or condition of merchantability or fitness for a particular purpose, is disclaimed except to the extent prohibited by law, in which case such warranty or condition is limited to the duration of this written warranty. This warranty gives you specific legal rights. You may have other legal rights that vary depending on where you live. Some states or provinces do not allow limitations on implied warranties or special, incidental, or consequential damages, so the foregoing limitations may not apply to you.

For faster service, locate the model, type, and serial numbers on your appliance.
For service assistance and product information, please call: 1-800-968-9853.
Curtis International Ltd.
7045 BECKETT DRIVE, UNIT 15, MISSISSAUGA, ON,
L5S 2A3 www.curtisint.com

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals