SYLVANIA SP417 20-Watt Rechargeable Disco Light-up Bluetooth Speaker User Manual

SYLVANIA SP417 20-Watt Rechargeable Disco Light-up Bluetooth Speaker

Specifications

• BRAND : SYLVANIA
• MODEL NUMBER : SP
• SPEAKER MAXIMUM OUTPUT POWER : 20 Watts
• CONNECTIVITY TECHNOLOGY : Bluetooth, USB
• COLOR : Black
• BLUETOOTH : 4.2
• OUTPUT POWER : 10 watts
• FREQUENCY RESPONSE: 150 Hz to 18 kHz
• PRODUCT DIMENSIONS : 5.5 x 6 x 16 inches
• ITEM WEIGHT : 3.74 pounds
• BATTERIES : 1 Lithium-Ion battery

Introduction

This Sylvania 20-Watt Disco-LED Light-up Bluetooth Speaker with FM Radio will provide vibrant color and powerful sound to your upcoming party. With Bluetooth technology, you can stream playlists or karaoke music, and the light-up display gives your event a distinctive look. Additionally, to USB and microSD Card ports for digital media files, there is a microphone input for your own microphone. Finally, replenish the battery as necessary using the USB power supply cable.

HOW TO USE

The speaker only needs to be turned on to enter pairing mode. The speaker is prepared to play music once you choose it from your Bluetooth menu!

HOW TO RESET

When you hear the gadget turn off, hold down the “volume down” and “power” keys simultaneously for around 6 seconds. Use the speaker as you would a fresh speaker after turning it on.

HOW TO CONNECT TO PHONE

• By holding down the Power or Pairing button, you can put your Bluetooth device in pairing mode.
• iPhone: Select Other devices under Bluetooth settings. To connect, tap the gadget.
• Go to Settings > Connected devices > Bluetooth on an Android device. After choosing Pair new device, tap the speaker’s name.

HOW TO PROGRAM

• Connecting a Bluetooth speaker: the steps.
• The speaker should be in pairing mode.
• Turn on Bluetooth on your smartphone.
• Hold on while the phone connects.
• Play music after connecting.

HOW TO FIX BLUETOOTH THAT WON’T TURN ON

• Check to see if your speaker has enough power.
• Make sure the USB AC adapter is firmly (not loosely) attached to the speaker and the wall outlet.
• Hold down the power button while waiting for the speaker to start up.

HOW TO TURN THE RADIO ON

To pick the FM radio mode, turn on the device and push the Mode button. The charging wire needs to be inserted as an antenna. Turn on the speaker, insert a TF card or U disc into the TF/USB port, and the Bluetooth mode will be removed as the speaker switches to TF/USB mode and begins playing music.

Frequently Asked Questions

Why won’t the battery on my Sylvania Bluetooth speaker charge?

Installing software updates, replacing the battery, purchasing a new cable, repairing a fractured solder joint, replacing the charging port, and replacing the charging circuit are all necessary fixes for a Bluetooth speaker that won’t charge.

How long does a Sylvania Bluetooth speaker take to charge?

The speaker will automatically switch off when the battery is empty. Every time the battery runs low, kindly recharge it. Connect the device to the Micro USB connection using any USB charger. The unit will take roughly 5 hours to fully charge at 5V/500mA if it is entirely depleted.

How can I tell whether my Bluetooth speaker from Sylvania is charging?

One of the lights in the row there should turn on to signify charging.

How can I tell when the battery in my Bluetooth speaker is full?

A row of LED lights on the front of your speaker will turn on once it is plugged in and remain on until charging is finished.

What happens if a Bluetooth speaker is overcharged?

The battery will be harmed even if you leave the Bluetooth speaker connected the entire day. Even when the battery is fully charged, continuing to charge the speaker could cause the battery to overheat and perhaps explode.

My Bluetooth speaker is charging, but can I use it?

Yes. Without endangering the battery, you can use your Bluetooth speaker while it is charging. When using the speaker for the first time, you should fully charge it while it is off so that you may check the battery life.

Why won’t my wireless speaker function?

Both devices’ volumes should be turned up. Ensure that the music is playing on your source device. Move the Bluetooth speaker as far away from metal objects and other potential interference-causing gadgets as you can. Make sure nothing is plugged into the wireless speaker’s AUDIO IN port.

Why does the blue LED on my Bluetooth speaker flash?

A strong connection may be indicated by a blue light that blinks continuously. The headphones may be in pairing mode if they have a slow blue light that pulses. Blinking red and blue lights are the most typical pairing mode light pattern.

Why can’t Bluetooth locate devices?

Go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile, & Bluetooth on Android devices. For iOS and iPadOS devices, you’ll need to unpair every device first, then restart your phone or tablet by going to Settings > Bluetooth, selecting the info icon, then selecting Forget This Device for each device.

Does a Bluetooth speaker require Wi-Fi?

Instead of an internet connection, short-range radio waves are how Bluetooth operates. This means you don’t need a data plan or even a cellular connection for Bluetooth to function anywhere you have two compatible devices.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>