CDA-45703-P1A Pressure Injectable Arrowg+ard Blue Plus Three-Lumen CVC Instructions

CDA-45703-P1A Pressure Injectable Arrowg+ard Blue Plus Three-Lumen CVC

Features

• 1: Arrowg+ard Blue Plus®1 Four-Lumen Catheter: 8.5 Fr. (3.0 mm OD) x 20 cm, Pressure Injectable
• 1: Spring-Wire Guide, Marked: .032″ (0.81 mm) dia. x 23-5/8″ (60 cm) (Straight Soft Tip on One End – “J” Tip on Other) with Arrow Advancer
• 1: Catheter: 18 Ga. x 2-1/2″ (6.35 cm) Radiopaque over 20 Ga. RW Introducer

Needle

• 1: Pressure Transduction Probe
• 1: Introducer Needle: Echogenic 18 Ga. x 2-1/2″ (6.35 cm) XTW and 5 mL Arrow®

Raulerson Spring-Wire Introduction Syringe
1: Injection Needle: Eclipse™2 22 Ga. x 1-1/2″ (3.81 cm) RW and 5 mL Luer-Slip

Syringe
1: Injection Needle: Eclipse™2 25 Ga. x 1″ (2.54 cm) RW and 3 mL Luer-Lock

Syringe

• 1: Syringe: 10 mL Luer-Lock
• 1: Tissue Dilator: 10 Fr. (3.5 mm) x 10.2 cm
• 1: SecondSite™ Adjustable Hub: Fastener
• 1: SecondSite™ Adjustable Hub: Catheter Clamp
• 1: SharpsAway® Disposal Cup
• 1: SharpsAway® II Locking Disposal Cup
• 1: Maximal Barrier Drape™ with 4″ fenestration
• 1: Towel
• 1: Needle Holder
• 1: Forceps
• 1: Safety Scalpel: #11
• 1: Checklist/CLIP Sheet
• 1: Sterile Procedure Sign
• 2: Gauze Pad: 2″ x 2″ (5 cm x 5 cm)
• 5: Gauze Pad: 4″ x 4″ (10 cm x 10 cm)
• 1: Dressing: Tegaderm®3 10 cm x 12 cm
• 1: Surgical Apparel: Impervious Gown
• 1: Surgical Apparel: Bouffant Cap
• 1: Surgical Apparel: Mask with Eye Shield
• 1: Suture: 3-0 Silk with Curved Needle
• 1: HemoHopper® Fluid Receptacle
• 1Licensed under US Patent No. 7,329,412.
• 2A trademark of Becton, Dickinson and Company.
• 3A registered trademark of 3M Company.

Not made with natural rubber latex. Store below 25°C (77°F). Avoid excessive heat above 40°C (104°F).
Contraindications: The Arrowg+ard Blue Plus antimicrobial catheter is contraindicated for patients with known hypersensitivity to chlorhexidine, silver sulfadiazine and/or sulfa drugs.

Specifications

• Priming volumes are approximate and are done without accessories.
• Flow rate values are approximate and are determined using deionized water at 100 cm head height.
• Pressure injection flow rates are determined using media of 11.8 centipoise (cP) viscosity, with 152 cm administration set tubing.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>