OontZ SOWAH20BK Golf and H20 Mount and Bracket User Guide

June 5, 2024
OontZ

OontZ logo

SOWAH20BK Golf and H20 Mount and Bracket
User Guide

SOWAH20BK Golf and H20 Mount and Bracket

Attaching the OontZ Speaker Bracket & Clamp Mount to the OontZ Angle 3 Golf or OontZ Angle 3 Pro H2O Special Edition Speakers. Designed especially for the OontZ Angle 3 Golf and OontZ Angle 3 Pro H2O Special Edition Speakers.

  1. Attach the OontZ Clamp Mount to the OontZ Speaker Bracket.
  1. Place the bottom of the OontZ Speaker Bracket into the slots of the OontZ Clamp Mount.
  2. Insert the Thumb Screw into the OontZ Clamp Mount.
  3. Tighten the Thumb Screw to secure the bracket to the mount. When tightened the speaker will stay in position.
    OontZ SOWAH20BK Golf and H20 Mount and Bracket -
feger1
  1. Loosen the adjustment knob on the back of the bracket until the bracket is wide enough to fit on the bottom of the speaker.
    OontZ SOWAH20BK Golf and H20 Mount and Bracket -
feger2

  2. While holding the assembled Oont7 Bracket and Mount place the bottom of the speaker into the bracket. The curved portion of the bracket should fit to the curved bottom of the speaker.
    Note: For the OontZ Angle 3 Golf speaker there will be a small gap between the bottom of the speaker and the top flat surface of the bracket.

  3. Turn the adjustment knob on the side of the bracket until the bracket firmly clamps to the speaker.
    Note: Do not over tighten as it may damage the bracket.
    OontZ SOWAH20BK Golf and H20 Mount and Bracket -
feger4

  4. Assemble the OontZ Clamp Mount Base to a bar on your Gof Cart. Boat or other location.

  1. Turn the knob on the OontZ Clamp Mount until the opening of the clamp is able to fit around the bar the mount is being attached too.
  2. Place the opening of the clamp around the bar and tighten the knob on the OontZ Clamp Mount until clamp is firmly clamped to the bar.
  3. When tightened, the speaker and clamp will stay in position.
    OontZ SOWAH20BK Golf and H20 Mount and Bracket -
feger5 Note: If using in saltwater environments, after use rinse with fresh water, wipe off the water, and place in a dry place.
    This will keep the speaker, bracket & mount from rusting over time.

Customer Support
If you have a question about your OontZ Speaker
Bracket or Clamp Mount, our Customer Service
Team wants to assist you.
Contact us at:
The OontZ.com/support and fill in our customer service form

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

OontZ User Manuals

Related Manuals