Lenco TTA-3IN1 Record Cleaning Kit User Manual
- June 5, 2024
- Lenco
Table of Contents
Lenco TTA-3IN1 Record Cleaning Kit User Manual
Instructions
-
Place your record on the turntable to start rotation.
-
Using the record cleaner spray provided. lightly mist the brush bristles prior to placing brush on the record.
-
Holding the silver part of the brush, gently hold and position the brush in the grooves as the record spins. Let the record rotate 1 or 2 times until the dust has been collected.
-
Keeping the brush on the vinyl, carefully pull the brush towards you and try not to lose any of the collected dust.
It may be necessary to perform a second pass clean up any remaining dust particles. -
That’s it. Drop the needle and enjoy!
Cleaning your brush
Simply rotate the silver brush grip in and out of the black handle a few times. All clean.
Note
- Keep out of reach from children.
- Do not touch the carbon fiber bristles or subject to any undue pulling or bending.
- Record cleaner can cause serious eye irritation. If in Eyes, remove contact lensen and rinse cautiously with water for several minutes. If eye irritation persists get medical advice.
Service
For more information and helpdesk support, please visit
www.lenco.com
Lenee Benelux BV, Thermiekstraat 1a, 6361 HB Nuth,
The Netherlands.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>