emerio 89980104 INSIDO Vacuum Cleaner Instruction Manual

89980104

Vacuum Cleaner

USE AND FUNCTION

Assembling vacuum cleaner

Note:
Always remove the power plug from the wall outlet before assembling or removing accessories.

1. Attaching the Flexible Hose into the vacuum cleaner. Align the rim and insert the flexible hose into the air inlet socket.
2. Fitting the tube to the curved wand/hose extension. Push the tube into the curved wand/hose extension.
3. Fitting the floor brush to the tube. Push the tube into the floor brush. Adjust the tube to the desired length.
   Tip: By reducing the suction power you can move the floor brush easier on the floor. Set the suction power to minimal for furniture, to medium for carpet and hard floors. Only use the maximum setting on hard floors in combination with a brush for hard floors.

**BUTTON FUNCTION INTRODUCTION

**

Note: Once all attachments are in place, unwind a sufficient length of cable and insert the plug into the wall outlet. A yellow mark on the power cord shows the ideal cable length. Do not pull the power cord beyond the red mark.

1. Insert the power plug into the wall outlet.
2. Press the on/off button located on the unit to turn the vacuum cleaner “on”. To adjust the suction, slide the speed control button to control the suction power of the vacuum cleaner.
3. To rewind the power cord, press the cord rewind button with one hand and guide the power cord with the other hands to ensure that it does not whip causing damage or injury.

**CLEAN THE DUST CUP

**

Note: the MAX level on the dust cup in case it becomes too full. To clean the dust cup, follow the steps below.
Warning: Always unplug the unit from the electrical outlet before getting out the dust cup.

1. Press the dust cup release button and hold the dust cup out.
2. Pull out the clip of the dust cup to open the dust cup cover.

CLEAN THE MOTOR PROTECTION FILTER

1. First, take out the dust cup.
2. You will find the motor protection filter (A) on the machine. Take the filter out for cleaning. Dry it thoroughly before placing it back.
3. The motor protection filter should be removed and rinsed twice a year or whenever it is visibly clogged.
4. If the filter is damaged, a new filter should be replaced.

CLEAN THE HEPA AIR OUTLET FILTER

1. Press the top of the air outlet cover to unclip the cover.
2. Press and unclip the Hepa air outlet filter from the side.
3. Clean the Hepa air outlet filter. Dry it thoroughly before placing it 4. Put back the air outlet cover after the filter is placed back.

Please note:
The Hepa filter in the cleaner will become dusty over time. This is normal and will not affect the performance of the filter. If the Hepa filter is so dusty that suction does not return to 100%, we suggest that the filter be removed then rinsed under the faucet and allowed to dry for 24 hours by airing not near the fire or some high temperature
objects before refitting into the vacuum. This should be done at least every six months or when suction appears to be reduced obviously.

Note:
The suction hole must be open, free of any obstructions at all times. Otherwise, the motor will overheat and could become damaged.
Important:
All filters should be checked regularly for signs of damage, preferably after each cleaning task. The filters must be replaced immediately if they become damaged. Always disconnect the vacuum from the electrical outlet when checking the filters.
Parking:
This vacuum cleaner can be parked in the below style to save your room space.

TECHNICAL DATA

Voltage: 220-240V ~ 50-60Hz
Power: 800W

GUARANTEE AND CUSTOMER SERVICE

Before delivery, our devices are subjected to rigorous quality control. If, despite all care, the damage has occurred during production or transportation, please return the device to your dealer. In addition to statutory legal rights, the purchaser has an option to claim under the terms of the following guarantee:
For the purchased device we provide 2 years guarantee, commencing from the day of sale. If you have a defective product, you can directly go back to the point of purchase.
Defects that arise due to improper handling of the device and malfunctions due to interventions and repairs by third parties or the fitting of non-original parts are not covered by this guarantee. Always keep your receipt, without the receipt you can’t claim any form of warranty. Damage caused by not following the instruction manual will lead to a void of warranty, if this results in inconsequential damages then we will not be liable. Neither can we hold responsible for material damage or personal injury caused by improper use if the instruction manual is not properly executed? Damage to accessories does not mean free replacement of the whole appliance. In such case please contact our service department. Broken glass or breakage of plastic parts is always subject to a charge. Defects to consumables or parts subjected to wearing, as well as cleaning, maintenance, or the replacement of said parts are not covered by the warranty and are to be paid.

ENVIRONMENT-FRIENDLY DISPOSAL

Recycling – European Directive 2012/19/EU

This marking indicates that this product should not be disposed of with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

BDSK Handels GmbH & Co. KG
Mergentheimer Straße 59
D-97084 Würzburg Germany

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>