XPOtool 61858 Hot Glue Gun User Manual
- June 3, 2024
- XPOtool
Table of Contents
XPOtool 61858 Hot Glue Gun
Read and follow the operating instructions and safety information before using
for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical
data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities,
please contact us.
CONTACT
The information contained in this document may alter at any time without
previous notice. It is prohibited to copy or spread any parts of this document
in any way without prior written allowance. All rights reserved.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible
mistakes in this operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible
efforts to ensure that the operating manual is complete, faultless, and up to
date, mistakes cannot be entirely avoided. If you should find a mistake or
wish to make a suggestion for improvement, we look forward to hearing from
you.
Send an e-mail to: service@wiltec.info
or use our contact form: https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in
our online shop via: https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
To return orders for exchange, repair, or other purposes, please use the
following address. Attention! To allow for a smooth execution of your
complaint or return, it is important to contact our customer service team
before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
Introduction
Thank you for purchasing this quality product. To minimise the risk of injury we urge that our clients take some basic safety precautions when using this device. Please read the operation instruc-tions carefully and make sure you have understood its content. Keep these operation instructions safe.
Main components and their names
| № | Name |
|---|---|
| 1 | Charging Station |
| 2 | Holes for parking brackets |
| 3 | Device plug on charging station |
| 4 | Glue stick viewing window |
| 5 | Socket on charging station |
| 6 | Power cord |
| 7 | Glue stick holder |
| 8 | Mains connection light |
| 9 | Socket on adhesive gun |
| 10 | Trigger |
| 11 | Support bracket |
| 12 | Nozzle |
| 13 | Glue sticks |
Technical data
| Input voltage (V) | 230 |
|---|---|
| Input frequency (㎐) | 50 |
| Input power (W) | 23 |
| Max. power consumption (W) | 80 |
| Preheating time (min) | 3–5 |
| Fluid quantity (g⁄min) | 9–16 |
| Glue stick diameter (㎜) | 11.2 |
| Glue stick type | Hot-melt adhesive |
| Protection class | II |
| Weight (㎏) | 0.35 |
Safety instructions
Warnings!
- Only use this device in a well-ventilated place and always wear suitable safety glasses!
- Do not touch the molten adhesive or the nozzle (12). Both are very hot during and after use!
- When the adhesive is heated, harmful vapours can be released. Molten adhesive can cause burns!
Important note: Oval glue sticks and cold glue sticks must not be used with this device. These glue sticks have a lower melting point (90–110 ℃), which means that the flow rate of the glue cannot be controlled sufficiently. The uncontrolled release of adhesive from the body of the unit is a safety hazard and will cause damage to internal components not covered by the warranty.
- Only use glue sticks with a diameter of 11.2 mm for this hot glue gun.
- Do not connect the hot-melt glue gun to the mains supply without a glue stick inserted.
- Always disconnect the hot-melt glue gun from the power supply before leaving it unattended.
- This device must not be operated by people (including children) with limited physical or mental abilities.
- The hot metal nozzle of this hot glue gun must never come into direct contact with flammable objects such as paper, cardboard, plastic, wood, etc. – Fire hazard!
Operation
- Mount the support bracket (11) to the hot-melt glue gun using the mounting holes (2).
- Connect the mains cable (6) to the socket (5) on the charging station.
- Insert one of the glue sticks (13) into the glue stick holder (7). Push it forward until you feel a slight resistance.
- Place the hot-melt glue gun in the charging station (1), making sure that the socket (9) on the glue gun is firmly seated on the appliance plug (3) on the charging station.
- Make sure that the charging station with the device is always positioned on a stable, straight surface in the immediate vicinity of the workpiece.
- Connect the unit to the mains using the mains cable (6).
- Wait 3–5 min for the unit to reach its operating temperature.
- Remove the hot glue gun from the charging station and guide the nozzle (12) over the surface to be glued.
- Lightly actuate the transport lever (10) so that the glue stick is pushed forward and melted glue is dispensed.
- Release the transport lift to stop the adhesive flow.
- After the gluing process has been completed, place the device back in the charging station. Never place the device on its side while it is connected to the mains!
- Disconnect the hot glue gun from the power supply after finishing the work!
Notes:
- As soon as the hot-melt glue gun is removed from the charging station in wireless operation, its energy supply is interrupted and the adhesive can only be applied for a short time.
- The hot glue gun can also be used if the mains cable is plugged into the socket on the unit. The user is free to choose the most suitable operating mode for the task to be performed.
- Never try to pull broken glue sticks out of the device. A broken glue stick can remain in the device.
- Always practise applying the adhesive to residual material until you have gained confidence in using the hot-melt glue gun.
- As with all adhesives, the adhesive performance depends on the weather conditions in the working area. As the respective application conditions are decisive, the information given here is for orientation only.
- Make sure that the surfaces to be glued are dry and free of dust, grease and other pollutants.
- Apply the adhesive to only one of the surfaces and then immediately join the two surfaces to-gether. Then press the parts together for 20–30 s.
- When gluing different materials, apply the adhesive to the material with the lowest absorbency.
- When cold materials are glued, a better gluing performance can be achieved if the surfaces are heated before the adhesive is applied.
- When you glue textiles and similar materials, it is advised to apply the adhesive in wavy lines.
- Excess adhesive can be removed with a sharp knife after it has cooled down.
Storage
- Make sure that all parts of the unit have cooled down completely before storage. Never wrap the power cord around a device that has not cooled completely.
- Store the device safely in a dry place out of the reach of children.
Disposal regulations
EU guidelines regarding the disposal of scrap electric appliances (WEEE,
2012/19/EU) were implemented in the law related to electrical and electronic
equipment and appliances. All WilTec electric devices that fall under the WEEE
regulations are labelled with the crossed-out wheeled waste bin logo. This
logo indicates that this electric equipment must not be disposed of with
domestic waste. The company WilTec Technik GmbH has been registered in the
German registry EAR under the WEEE-registration number DE45283704. Disposal of
used electrical and electronic appliances (intended for use in the countries
of the European Union and other European countries with a separate collection
system for these appliances). The logo on the article or on its packaging
points out that this article must not be treated as normal household waste but
must be disposed to a recycling collection point for electronic and electrical
waste equipment. By contributing to the correct disposal of this article you
protect the environment and the health of your fellow men. Environment and
health are threatened by inappropriate disposal. Material recycling helps
reduce the consumption of raw materials.
Additional information on recycling this article can be provided by your local
community, municipal waste disposal facilities, or the store where you
purchased the article.
Address:
WilTec Wildanger Technik GmbH Königsbenden 12 / 28 D-52249 Eschweiler
Important notice:
The reprint or reproduction, even of excerpts, and any commercial use, even in
part, of this instruction manual require the written permission of WilTec
Wildanger Technik GmbH.
https://www.XPOtool.com
The Tool Experts
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>