defender Car Holder 111 Phone Holder Instruction Manual
- June 10, 2024
- Defender
Table of Contents
TRIFLES MAKE PERFECTION
Car Holder 111 Phone Holder
Instruction Manual
Assembling parts of the holder
1.1 Insert the hooks into the p-siots
1.2 Force the hooks into the slots until they click.
**1.3 Set a convenient angle of the upper part of the holder and
roc it by inserting the bolt into the notch**
Installing the holder on the windshield
2.1 Remove the protective film from the suction cup
2.2 Thoroughly clean the surface where the holder will be installed
2.3 Raise the holder base lock lever
2.4 Install the holder and press firmly on the holder base to press it as much
as possible against the surface
2.5 Hold the holder with one hand and close the base release lever with the
other
Installing the smartphone in the holder
3.1 Extend the clips 3.2 Press the button on the side and hold
it until the side sections open to the required width
**3.3 Insert the smartphone and close the flaps with your hands Terms and conditions of safe and efficient use of the product
Usage precautions:**
- Use the product for its intended purpose only.
- Do not disassemble. This product does not contain parts that are entitled to self-sufficient repair. On the question of maintenance and replacement of a failed item apply to a dealer or Defender authorized service center. While receiving the product make sure that it is unbroken and there are no freely moving objects inside the product.
- Keep away from children under the age of 3. May contain small parts.
- Keep away from humidity. Never immerse the product in liquids.
- Keep away from vibrations and mechanical stresses, which can cause mechanical damaging of the product. In case of mechanical damage no warranties are provided.
- Do not use in the presence of visual damage. Do not use when the product is obviously defective.
- Do not use the product at temperatures below and above recommended temperatures (-30 – +50°C), under the conditions of humidity evaporation, as well as in hostile environment.
- Do not put into the mouth.
- Do not use the product for industrial, medical or manufacturing purposes.
- In case when shipment of the product was conducted in subzero temperatures, then before operating, the product should be kept in a warm placement (+16-25°C or 60-77°F) within 3 hours.
- Do not use the device while driving the vehicle, if it is diverted attention, and in other cases when the law obliges you to turn off the device.
Features
- Suitable for phones, smartphones, navigators
- Soft side clips
- Holds the devices of up to 1 kg
- You can easily fix or remove the stand without tools
Specification
- For devices with diagonal of: ≤7″
- Adjustable distance between clamps: 55-120 mm
- Rotation: 360°
- Mounting: for the glass
- Material: plastic
- Color: black
IMPORTER: Defender Technology OU, Betooni str 11, 11415, Tallinn,
Estonia. Manufacturer: Dongguan Su Tong Jie Plastic Hardware Co., Ltd.
Address: 2/F No.5 Yin Qu Street, Tangxia Town Dongguan, Guangdong, China.
Made in China.
Unlimited shelf life. Service life is 3 years. Date of manufacture: see on the
package.
Manufacturer keeps the right to change package contents and specifications
indicated in this manual.
The latest and detailed operation manual is available at www.defender-
global.com
Made in China.
Documents / Resources
|
defender Car Holder 111 Phone
Holder
[pdf] Instruction Manual
Car Holder 111 Phone Holder, Holder 111 Phone Holder, 111 Phone Holder, Phone
Holder, Holder
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>