ANKER A2669 Prime 67W GaN Wall Charger 3 Ports User Manual
- June 12, 2024
- Anker
Table of Contents
ANKER A2669 Prime 67W GaN Wall Charger 3 Ports
Anker Prime 67W GaN Wall Charger (3 Ports)
Product Number: A2669 51005003914 V01
Product Information
- Three-port wall charger
- Maximum power output: 67W
- Built with GaN (Gallium Nitride) technology
- Complies with Part 15 of the FCC Rules
- Class B digital device
- Compliant with CAN ICES-003(B)/NMB003(B)
- In compliance with Directive 2014/35/EU, 2014/30/EU, 2011/65/EU, 2009/125/EC, and 2019/1782/EU
- In compliance with Electrical Equipment (Safety) Regulations 2016, Electromagnetic Compatibility Regulations 2016, The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
- Regulations 2012, and The Ecodesign for Energy-Related Products Regulations 2010
- Manufacturer: Anker Innovations Limited
- Model Number: A2669
Product Usage Instructions
- Plug the Anker Prime 67W GaN Wall Charger into a power outlet.
- Connect your devices to the charger using the provided USB-C1, USB-C2, or USB-A ports.
- Make sure to use the appropriate cable for your device’s charging port.
- Ensure that the charger is properly connected and the LED indicators are lit.
- Once connected, the charger will automatically detect your device and deliver the optimal charging speed.
- Do not use the charger if it is damaged or if any component is defective. Dispose of the product properly.
Attention
Read all the instructions before using the product.
- The product is designed for use with IT equipment only.
- Naked flame sources, such as candles, must not be placed on the product.
- The disconnection from line voltage is made by an AC plug.
- In case of broken plugs, the product must be disposed of.
- If you want to clean the product, only use a dry cloth or brush.
- The socket outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
Using Your Product
For the fastest and safest charge, use an Anker® cable, your device’s original
cable, or another certified cable (such as MFi).
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If This equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 (800) 988 79733
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB003(B).
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU & 2009/125/EC & 2019/1782/EU. The full text of The EU Declaration of Conformity is available at the following Internet address:https://www.anker.com.For tutorial videos, FAQs, manuals, and more information, please visit: Or scan the QR code below: https://support.anker.com
Indoor use only
This symbol indicates that this product shall not be treated as household
waste. Instead, it shall be handed over to the applicable collection point for
the recycling of electrical and electronic equipment. Anker Innovations
Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon,
Hong Kong The following importer is the responsible party (contract for EU and
UK matters) Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807
Munich, Germany Anker Technology (UK) Limited | GNR8, 49 Clarendon Road,
Watford, Hertfordshire, WD17 1HP, United Kingdom
Specifications
Input
| 100V-240V~50/60Hz 1.8A
---|---
Output
| Use 1 Port Output
USB-C1/ C2: 5V 3A/ 9V 3A/12V 3A/ 15V 3A/ 20V 3.35A (67W Max)
USB-A: 4.5V 5A/ 5V 4.5A/ 5V 3A/ 9V 2A/ 12V 1.5A/ 10V 2.25A(22.5W Max)
Use 2 Ports Output USB-C1+USB-C2: 65W Max USB-C1+USB-A: 65W Max USB-C2+USB-A: 65W Max
Use 3 Ports Output 64.5W Max
Total Output
67W Max
PPS| Support PPS / PPS
Average active efficiency
|
77.28%
---|---
ElJoffiadcie(1n0c%y|
52.43%
Ncoon-lsouamdpptoiowner
|
0.21W
Operating temperature
| 0℃-25℃/32℉-77℉
Note: To ensure electrical safety and product performance, the output
power may fluctuate based on the ActiveShield™ safety mechanism when the
ambient temperature is between 26-35°C(78.8-95°F)with a high output load.
ActiveShield™ enhances protection by intelligently monitoring temperature and
adjusting power output to safeguard your connected devices
Customer Service
Please note that your rights under applicable laws governing the sale of
consumer goods remain unaffected by the warranties given in this Limited
Warranty 24-month limited warranty: Lifetime technical support
support@anker.com
support.mea@anker.com (For Middle East and
Africa Only