SCOSCHE PSQ3-SP Powersports Quick Charge Port User Guide
- June 5, 2024
- Scosche
Table of Contents
PSQ3-SP Powersports Quick Charge Port
User Guide
Reglatw ,our product onllne at
www.scosche.com/register
IMPORTANT!
DO NOT RETURN THE PRODUCT TO THE RETAILER
IF YOU NEED ASSISTANCE OR REPLACEMENT PARTS CALL US TOLL FREE t-800 38341490
HOURS: ISON FFU SASS:30PM (PST)
SATURDAY SANI4P11 (PST)
LIABILITY DISCLAIMER
This Instruction manual is based on carefully documented data and research
by Scosche Industries Inc. and cannot be held responsible for
discrepancies/inconsistencies that may occur due to the vehicle manufacturing
changes or options, or damages that may occur In the vehicle during the
installation of components while using this manual.
If you have any further questions, can our ton free technical helpline:
1-800-363-4490 x1 or visit us online at
www.scoscht.com/contact
MOUNTING PREPARATION OPTION
CUSTOM INSTALL
-
Remove the lock nut from the PSQ3.
-
Remove the weather cap from the PSQ3.
-
Choose an area of the dash that is free of obstructions behind the panel and ..allows the cables to reach the rear inputs of the stereo.
-
Use a hole saw or step drill bit to drill a 1″ (26mm) hole for the 12V POWER plug (Figure 4).
-
Feed PSQ3 from behind custom drilled panel hole.
-
Secure weather cap to the exposed PSQ3 in front of the panel.
-
Secure tightening lock to the PSQ3 to secure into place
ZIP TIE MOUNTING OPTION
Secure nut to protective cover, then zip tie to the wire loom.
WIRING DIAGRAM
NOTES
Scosche Industries
1550 Pack Avenue
1500 pathetic, California 93030
Phone 800 363 44901 RO5 4864450×1
www.scosche.com
©Stosche Industries 2021
PS03 5121
References
- Scosche Tech Accessories | #1 Mount Brand in US & Canada
- Product registration | Register your purchase
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>