Gymax 1500-Watt Portable PTC Fan heater User Manual
- June 5, 2024
- GYMAX
Table of Contents
Gymax 1500-Watt Portable PTC Fan heater
Please read this Instruction carefully before use
Functional charactcnst1cs
- Strong air supply structure, with strong and soft hot air, air oscillated at a large angle as well as the even heat distribution
- High-quality PTC heating device, which can automatically fine-tune the power, according to the change of ambient temperature. The non-oxidizing property makes it last longer and is more environmentally friendly
- Two-stage power available (?SOW/I SOOW) with adjustable heal
- Double overheat protect10n dev1ee for safe use.
Main technical parameters
- Rated voltage: 120V–
- Rated frequency: 60Hz
- Rating power, High-gear for 1500W Low-gear for 750W
- Oscillating angle: 60 degrees
- Applicable environment: -4 r95f(-20’C-+35°C) , relative hum汕ty shall be less than 85%;
Safety instructions
- The fan heater should be placed in a suitable place. Do not place the fan heater under the power socket
- It is strictly prohibited to place flammable or explosive materials around the fan heater. Do not use the fan heater in a place full of flammable gas and dust. Keep it away from heat sources, such as fire and heating.
- The fan heater should be placed on a flat and solid table or floor. Do not use the fan heater around the bathtub, nozzle, or swimming pool
- This device should not be used by people (including children) who are physically, sensuously, or mentally deficient, or who lack experience and knowledge. Unless they are supervised or instructed by the person responsible for their safety regarding the use of the product
- Children should be looked after to ensure that they do not play with this product
- The power cord should be placed well to prevent the fan heater from being tripped when walking
- TI1e power cord should not touch the mesh enclosure (or air outlet) to avoid scalding the power cord at high temperatures
- Do not hang dripping clothes above the fan heater or expose it to rain to avoid the risk of electric leakage. It is strictly forbidden lo cover the combustibles and wet clothes n the fan heater mesh enclosure to avoid the risk of fire or electric shock.
- The power supply voltage and frequency should meet the main technical parameters of the fan heater
- The meter and random line should be able to load the power consumption of the fan heater. In addition, the loads when it is used simultaneously with other appliances should be considered.
- When the fan heater is working, it is forbidden to touch the mesh enclosure(or the air outlet) to prevent the skin from being burnt at high temperature
- Do not remove the mesh enclosure.
- The power cord should be unplugged when it is shut down. Be careful when removing the plug. Donut pull lhe power curd by hands. The fan heater should be lumped before unplugging the power plug
- When not in use for a long time, the machine should be packed to prevent dust from entering the machine, and it should be stored in a dry and ventilated place
- Do not use this product when there are unattended children, animals, or people who are disabled m action and lack self-control
- Please contact the after-sales service point or find a professional to repair it 1f the power cord of this machine is damaged or other faults occur. It is strictly forbidden to remove the parts of the product and replace accessories that do not meet tl1e safety regulations
- It is strictly forbidden to insert conductive objects into the front and rear mesh enclosure (or air outlet) to avoid the risk of electric shock caused by touching electrical components.
- For safety reasons, the unattended fan heater in the work must be shut down to avoid accidents
- The fan heater stored JU the cold environment below-4T (-20°C) should be warned to a temperalllfe above-4°F C-20°C) before being started to avoid the material changes due to low temperature and affect the safety of the product
- Keep the back air inlet and the air outlet open, and do not cover them with foreign objects
Structural diagram
- Switch of gear: Three gears: cold air, bottom heat and nigh heat
- Temperature control knob: To adjust the ambient temperature of ring heating
- Spin button: To enable or disable the rotation function
Function operational instrıuctions
- Place the fan heater in the appropriate position by referring to the safety instructions, and plug the power cord into the power socket.
- Switch of gear: Three gears: cool, warm, hot wind
- Temperature control knob: To adjust the ambient temperature of ring heating
- Spin button: To enable or disable the rotation function
- Plug the power cord into a socket with a rated current greater than JOA by referring to the safety mstruct1ons
- Rotate the temperature control knob clockwise to the maximum posit10n. (After adjusting to the suitable and comfortable temperature, put the temperature control knob at the OFF position, and the working tempera1ure at this time is the ambient temperature you set; there will be a sound of “click” when the temperature control is closed).
- Switch operation instructions: Rotate the switch of gear, and when the knob is rotated to the O position, the product is OFF; when the knob is rotated to the position, the fan starts to work and blows cold air, and the work indicator lights up synchronously; the knob is rotated to I position start 750\V low-heat air supply; the knob is rotated to the ll position —– start 1500\V high-heat air supply;
- closed indication
- cold air indication
- 750W low-heat indication
- 1500W high-heat indication
- 4. Shutdown: First tum the switch knob to the cold air position, and work for about 30 seconds so that the heat in the fan heater can be completely dissipated. Then, tum the knob to the O position, the indicator light goes out, and then turn the temperature control knob to the minimum position, unplug the power cord plug.
Repair and maintenance
- Before the repair and maintenance, please unplug the power cord and wait for the fan heater to cool down.
- When the external surface area is covered with dust, wipe it with a soft cloth: when the surface is too dirty, mix it with water belowl22r (50°C) and neutral detergent, then wipe it with a cloth
- Do not use gasoline, thinner, diluent or any substances that may damage the external surface when cleaning.
- The fan heater should be cooled down, dried, and packaged before storing, and should be stored in a dry and ventilated place.
Welcome to visit our website and purchase our quality products!
Your suggestions and comments for COSTWAY are really important to us! We sincerely solicit you to go back to our shop and leave a good rating in just a simple click. It would be quite encouraging if you could kindly do so like below: * Great products so far February 24, 2019, Great products so far. Fast delivery, easy setup, and working without any issues With your inspiring rating, COSTWAY will be more consistent to offer you EASY SHOPPING EXPERIENCE, GOOD PRODUCTS, and EFFICIENT SERVICE!
- US office: Fontana, California
- UK office: Ipswich
We would like to extend our heartfelt thanks to all of our customers for taking time to assemble this product and giving us valuable feedback.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>