D-Link DGS-1005A Gigabit Desktop Switch User Guide
- June 5, 2024
- D-Link
Table of Contents
D-Link DGS-1005A Gigabit Desk
CONTENTS
- 5/8-PORT GIGABIT DESKTOP SWITCH
- QUICK START GUIDE
- POWER ADAPTER 5V / 1A
- If any of these items are missing from your packaging, contact your reseller.
PRODUCT SETUP
SWITCH SET-UP
Step 1
Connecting the power adapter
Plug the power adapter into a free wall socket, then plug the other end of the
power adapter cable into the power port of the switch. The power LED will
light up, confirming that the device is powered up successfully.
Step 2 Connecting your Network Devices
Use a LAN cable to connect your network device to one of the 5 ports or 8
ports on the switch.
Step 3 Determine that the Switch is Powered On
The Power LED indicator light is green when the Switch is receiving power;
otherwise, it is off.
Determine that the Network Devices are Connected
The Link/Act LED indicator light is green when the port is connected to a
device. The green indicator blinks as data is transmitted or received.
TROUBLESHOOTING
SETUP AND CONFIGURATION PROBLEMS
-
WHAT TO DO IF THE POWER LED IS NOT LIT UP
Check if the power adapter is properly connected to a wall socket and the back of the switch. -
WHAT TO DO IF A CONNECTED DEVICE IS NOT DETECTED
First, check if the Port LED is flashing. If the Port LED is not illuminated, try connecting the device using a different LAN cable.
TECHNICAL SUPPORT
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>