Lightstar LUXED Series Bi-Color LED Light User Manual
- June 5, 2024
- Lightstar
Table of Contents
Lightstar LUXED Series Bi-Color LED Light
General Introduction
The Lightstar LUXED Series are LED spotlights, optimized for heat dissi-pation and with an all new optical design. By using two high-quality LED‘s the spectral light distribution is even more continuos, resulting in accurate colors. The LUXED Series has a high output of power and can be used to substitute old Dyno tungsten lights, which need a lot more power. Also the ability to change the color temperature is a huge advantage to the original Dyno lights.
The original innovater of the LUXED series has been widely recognized in the market especially in the film and television industry.
General Characteristics
- modular design
- high quality bi-color light, CRI = 95
- brightness adjustable from 0 – 100%
- color temperature adjustable between 2800K and 6500K
- luminous flux output stays relatively stable when temperature is adjus-ted
- supports DMX512 protocol
- LCD software control, easy to operate
- DC power input (for battery operation or via mains power supply)
- adjustable frequency from 1Hz to 50Hz
- no UV output
- lamp and power-supply are easy to maintain
- patented optical lens design
LUXED-S – Technical Information
- SKU: LUXED-S
- Description: Bi-Color LED Spotlight
- Power: 180W
- Material: Aluminium casting
- Cooling: Active Cooling
- Color Temperature: 2800-6500K
- Dimming: 0-100%
- CRI: 95
- TLCI: >96
- AC Input (indirect): 100-240V AC via power supply (3-Pin XLR)
- DC Input: 48V DC (DC-IN 3-Pin XLR socket)
- Control: DMX In- & Output (5-Pin XLR socket)
- Frequency: 1-50Hz
- IP Class: IP20
- Dimensions: 365 x 360 x 98mm
- Weight: 4‘000g
LUXED-S – Operational Instructions
Connect the power supply / DC Input to the DC IN socket of the lamp head.
The LCD display (Figure 1) shows the lightstar logo on startup, as well as DMX information, when connected. Depending on the selected function, the screen shows the corresponding values.
The adjustable knob next to the LCD display is used to set the color tem- perature, brightness, frequency and DMX address.
Click Button M to enter the menu. Click again to get to the page before. Button A is a quick link to the color temperature adjustment. Click anot-her time and the display switches to the brightness adjustment. In Menu, button A is to select up.
Quick link button B to switch Bi-Color Mode and Frequency, in Menu but-ton B is to select down.
Quick link button E is for turning the light on / off.
Adjust knob to control the strobe‘s frequency.
The menu selection is self-explanatory. Just use the up and down buttons (A
and B) to go up and down. Turn the knob to adjust the different settings.
LUXED-2 – Technical Information
- SKU: LUXED-2
- Description: Bi-Color LED Spotlight
- Power: 360W
- Material: Aluminium casting
- Cooling: Active Cooling
- Color Temperature: 2800-6500K
- Dimming: 0-100%
- CRI: 95
- TLCI: >96
- AC Input (indirect): 100-240V AC via power supply (3-Pin XLR)
- DC Input: 48V DC (DC-IN 3-Pin XLR socket)
- Control: DMX In- & Output (5-Pin XLR socket) Wireless DMX (LumenRadio)
- Frequency: 1-50Hz
- IP Class: IP20
- Dimensions: 763 x 563 x 172mm
- Weight: 8‘500g
LUXED-3 – Technical Information
- SKU: LUXED-3
- Description: Bi-Color LED Spotlight
- Power: 540W
- Material: Aluminium casting
- Cooling: Active Cooling
- Color Temperature: 2800-6500K
- Dimming: 0-100%
- CRI: 95
- TLCI: >96
- AC Input (indirect): 100-240V AC via power supply (3-Pin XLR)
- DC Input: 48V DC (DC-IN 3-Pin XLR socket)
- Control: DMX In- & Output (5-Pin XLR socket) Wireless DMX (LumenRadio)
- Frequency: 1-50Hz
- IP Class: IP20
- Dimensions: 1048 x 563 x 172 mm
- Weight: 11‘500g
LUXED-4 – Technical Information
- SKU: LUXED-4
- Description: Bi-Color LED Spotlight
- Power: 720W
- Material: Aluminium casting
- Cooling: Active Cooling
- Color Temperature: 2800-6500K
- Dimming: 0-100%
- CRI: 95
- TLCI: >96
- AC Input (indirect): 100-240V AC via PowerCon
- DC Input: 48V DC (DC-IN 3-Pin XLR socket)
- Control: DMX In- & Output (5-Pin XLR socket) Wireless DMX (LumenRadio)
- Frequency: 1-50Hz
- IP Class: IP20
- Dimensions: 945 x 910 x 216mm
- Weight: 24‘000g
LUXED-6 – Technical Information
- SKU: LUXED-6
- Description: Bi-Color LED Spotlight
- Power: 1080W
- Material: Aluminium casting
- Cooling: Active Cooling
- Color Temperature: 2800-6500K
- Dimming: 0-100%
- CRI: 95
- TLCI: >96
- AC Input: 100-240V AC via PowerCon
- Control: DMX In- & Output (5-Pin XLR socket) Wireless DMX (LumenRadio)
- Frequency: 1-50Hz
- IP Class: IP20
- Dimensions: 1048 x 563 x 172 mm
- Weight: 33‘000g
LUXED-9 – Technical Information
- SKU: LUXED-9
- Description: Bi-Color LED Spotlight
- Power: 1620W
- Material: Aluminium casting
- Cooling: Active Cooling
- Color Temperature: 2800-6500K
- Dimming: 0-100%
- CRI: 95
- TLCI: >96
- AC Input: 100-240V AC PowerCon
- Control: DMX In- & Output (5-Pin XLR socket) Wireless DMX (LumenRadio)
- Frequency: 1-50Hz
- IP Class: IP20
- Dimensions: 1256 x 1218 x 216mm
- Weight: 39‘000g
LUXED-12 – Technical Information
- SKU: LUXED-12
- Description: Bi-Color LED Spotlight
- Power: 2160W
- Material: Aluminium casting
- Cooling: Active Cooling
- Color Temperature: 2800-6500K
- Dimming: 0-100%
- CRI: 95
- TLCI: >96
- AC Input: 100-240V AC via PowerCon
- Control: DMX In- & Output (5-Pin XLR socket) Wireless DMX (LumenRadio)
- Frequency: 1-50Hz
- IP Class: IP20
- Dimensions: 1256 x 1526 x 216 mm
- Weight: 50‘000g
LUXED-2 to LUXED-12 Introduction
The LUXED Series ar multi-units, adjustable bi-color LED lights. Users can
control these fixtures from three different modes via the menu.
WALL MODE: controls the whole fixture
RANK MODE: controls only one rank (column)
SINGLE MODE: controls every single unit
These lights all feature integrated DMX512 protocol as well as Wireless DMX
via LumenRadio.
LUXED-2 to LUXED-12 Operational Instructions
There are three parts on the control panel: Operating keys, LCD display and the adjustment knob.
Operating buttons consist of four keys. Button M is for entering the menu and
return to an upper menu level. Button A is to select up click button b is for
selecting down, button E is to enter. In Addition, the operating buttons
provide a quick link function under the main screen.
Button B: ON / OFF
Button A: Brightness & Color Temperature
Button E: select light mode
Select button M or quick link button E to enter lighting mode selection screen. You can choose between Wall, Rank and individual. On home screen, select quick link button E to enter light mode screen.
On light mode selection screen, select quick link button A or B, to go up or down. Select button E to enter light mode adjustment screen (Figure 5). Here you can change the settings. The same goes with Rank and Individual Mode. There you can change the settings by rotating the adjustment knob clock-/counterclockwise.
DMX Control
There are two kinds of DMX signal control: Wireless DMX and DMX. By default,
DMX is selected. There are 5-Pin XLR In- & Outputs on the console for DMX via
cable. For wireless DMX, there is an antenna mounted on the side of the
ballast.
DMX512 Data Pinout is as followed:
- Pin 1 Data Link Common GND
- Pin 2 Signal GND
- Pin 3 Signal +
- Pin 4 not used
- Pin 5 not used
On menu screen, select DMX to adjust DMX settings. By turning the adjustment knob, you can select the start address from 1 – 512.
Push Button A/B to select the DMX mode. You can choose between Wall, Rank, Individual and Controller.
Select button A/B to select DMX (cable). Select WDMX Switch if using Wireless DMX. Enter by pushing button E
When using Wireless DMX, make sure that the WDMX button on the ballast is also
in ON position! The WDMX Reset is used to resett/unlink the built-in
LumenRadio module.
For DMX Values we put together a chart that can be downloaded from our
website. Just go to the „Support“ section and you will find a sheet including
all our light fixtures.
Notice and Maintenance
- LED‘s operating temperature range must be guaranteed between – 20°C to +40°C. Overheating or undercooling can both reduce the fixtures life span.
- The product must be placed on a solit, flat and dry surface. The surface temperature should be less than 50°C. Avoid exposure to direct sunlight and operation in an enviroment with high humidity or explosive gas.
- Do not beat, knock or shake the light violently or it may influence the normal use of the light.
- Do not cover lamps with paper, cloth or similar materials that could ignite due to high temperature.
- Put the lamp in a cool and dry place when you do not use it for a long time.
- Avoid any flammable liquid, water or metal material entering the machine. Cut off the power supply as soon as this happens.
- Do not use machines in dirty and dusty environments and clean them regularly.
- The technicians must get professional trainings to install, operate or repair LED‘s.
- If any equipment from Lightstar doesn‘t work properly, please get in contact with a Lightstar special repair department or a professional technician. Do not disassemble or reassemble the parts by yourself.
Service Warranty Ordinance
Customers enjoy a one-year free warranty service as of the date of purchasing our product.
- If the expiry date of the warranty is reached, our product can still be repaired for an according to price.
- In any of the following circumstances, the product is not repaired free of charge, whether the warranty period expires or not.
- Damage caused by misuse or abuse, disassembly and non-original parts replacement.
- Damage caused by natural disasters, unconventional voltage and environmental factors
- Lightstar will remain in the power of interpretation.
- Software version modification without further notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>