SEALEY AK414 24V Battery Fluid Tester Instruction Manual
- June 4, 2024
- SEALEY
Table of Contents
SEALEY AK414 24V Battery Fluid Tester
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
INSTRUCTION
To prepare tester for use:
- Carefully remove instrument from card.
- Remove bulb, rubber bumper and float from jar. Remove foam strip from float.
- Hold instrument with tip pointing downward. Insert float, large end first into jar.
- Place rubber bumper into jar, then slip the bulb over the jar, slightly wetting the jar makes bulb go on easier.
- Instrument is now ready for use.
To test:
Squeeze bulb, then insert the tip of tester into the cell.
Release pressure on bulb until enough electrolyte is drawn into the jar to
freely float the hydrometer. The mark of hydrometer in line with the surface
of the liquid is the apparent specific gravity reading of the battery. Make
reading at eye level for accuracy. A temperature error correction must be
applied to this reading as follows: to the right side of the thermometer, note
the scale reading which coincided with the top of the red liquid column. Add
the black figures to the apparent specific gravity and subtract
the red figures.
Note: A proper test cannot be made unless each battery cell has
sufficient electrolyte to permit hydrometer float to rise freely. An accurate
reading cannot be obtained if water has just recently been added to cells.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications and component parts without
prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is
required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk.
IP32 7AR
TEL: 01284 757500
FAX: 01284 703534
EMAIL: sales@sealey.co.uk
WEB: www.sealey.co.uk
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>