vogue 373016 Cooling Air Conditioning Fan User Manual

vogue 373016 Cooling Air Conditioning Fan

Thank you for your trust and support and your selection of the latest multifunctional luxury cooling air conditioning fan successfully developed by our company. Please read the instructions carefully before using them; keep them properly for future reference. Thank you again for your support, and hope our products will bring you convenience and fun.

Safety warnings and precautions

To avoid dangers caused by misoperation and use the machine more conveniently, please pay attention to the following precautions indicated by icons. Please get familiar with the icons below and read the Operating Instructions.
WARNING:

1. This appliance can be used by children aged eight years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
2. Children shall not make cleaning and user maintenance without supervision.
3. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
4. Unplug the appliance during filling and cleaning.
5. The appliance is only for household and indoor use.

Symbol meaning and description

Warning

| Indicate that could result in death or serious injury, or property damage
---|---
General prohibition| ****

Indicate the behaviors that must be prohibited

Must Obey| ****

Indicate the content that must be enforced

●  Please send the product to the repair station or notify the service center if the product has a problem. Do not disassemble or replace parts without permission.

■      Disassembly and alteration without permission will affect the safety of the product.

| ●  Do not touch the power cord with wet hands.

■ Risk of electric shock.

---|---
●    Never insert wood sticks, metal sticks, and other objects into the air inlet and outlet.

■  It may lead to current leakage, short circuit, and product damage.

| ●  Do not spray insecticides or flammable sprays around the product.

■ It may cause damage to the product.

●  Avoid direct blowing to children for a long time.

■    It may lead to child sickness or affect the health

| ●  Do not pull the cord when unplugging the power plug.

■ It may damage the power cord and cause current leakage and other hazards.

---|---
●      Ensure that no foreign matter is adhered to the power plug and insert the plug completely.

■ It may cause current leakage.

| ●  Exception handling

■  If there is any peculiar smell or abnormal sound when using the product, stop it immediately and disconnect the Power.

●      Do not use the product if the power cord is exposed or damaged.

■ It may cause current leakage, short circuit, and fire hazard.

■   If the power cord is damaged, it must be replaced by qualified manufacturer personnel, repair or similar departments to avoid hazards.

| ●  Do not bend the power cord or place heavy objects on it.

■ It may cause current leakage.

---|---
●  The water level of the tank mustn’t exceed the maximum level. When the cooling or humidification function is turned on, the water level shouldn’t be lower than the minimum level.

●  Do not tilt or impact the device when placing or moving it after filling water to prevent water from spilling. ****

| ●  If the product has ever inclined and there is water inside, immediately pull out the plug and dry 24 hours before starting again.

Functions and Features

1. Wind mode: normal, natural, sleep, and smart
2. Third levels: high, medium, and low.
3. Humidifying/cooling.
4. Timing shutdown: schedule time increases by 0.5h; maximum schedule time 8H.
5. Wind direction: 360° rotation of the blades.
6. Electronic key control, digital tube displays timing and temperature
7. Infrared remote control.
8. Full pumping water tank, easy to clean.
9. Ultra-large high-quality wet curtain with high evaporation and pleasing cooling effect.
10. Spray water circulation cooling technology, large recycling capacity, faster cooling.
11. Power failure protection; tank water shortage protection
12. Double air filtration.
13. Universal front caster wheel design

Names and Functions of Parts

Product structure

1. Button;
2. Blade;
3. Function display window
4. CD grain decorative sheet;
5. Front shell
6. Water level display window
7. Universal casters;
8. Handle;
9. Remote repository
10. Backshell;
11. Air filter;
12. Reel
13. Power cord;
14. Water tank;
15. Casters;
16. Tank lock

Accessory

• Below is the operation panel of DF-A2906C
• Display panel diagram
• The operation panel of the remote control is subject to the importing country.

Product Installation Method

• Installation method
  The product can be used directly after unpacking (without installation).

• Method of use of function buttons

1. Plug in the Power, the buzzer sends a “beep” sound, and the system enters standby mode. If there is no button operation within one minute after any light and digital tube turn on, the light and the digital tube turn dark (33% brightness); if the button is operated, the light and the digital tube become brighter.

2. P ower on/off button:

   • In the Power-on state, press this button to send a long Bi- sound, and the device turns off and enters standby mode.

   • In the Power off state, press the Power on/off button, and all LED lights flash sequentially clockwise in three seconds; then it enters the default working state, except the timing, sleep and natural mode.
     ( Note: The device enters the default working state only when the power cord is unplugged for the first time; if the device is turned off and the power cord isn’t unplugged, it will enter the last state when the Power on/off button is pressed) Below is default working states:

   • Normal mode by default after turning on, no LED display.

   • The digital tube displays ambient temperature, “C” indicator turns on.

   • The blade indicator is off.

   • Cooling/humidification is off.

   • Start at medium level, turn to level low after three seconds.

   • The timer function is off, the indicator turns off.

3. Speed button
   In Power on state, press the Speed button to switch among low, medium, and high levels.

4. Cooling/humidify button
   In Power on state, press this button to switch on/off cooling/humidification, and the corresponding indicator displays its function

5. Timing button

   • After turning on, the timer is turned off by default, and the digital tube displays ambient temperature; when the button is first pressed, the “H” indicator turns on, and the timer is set to 0.5h; the time increases by 0.5h when the button is pressed every time, and the timer can be set up to 8.0 hours; if the button is pressed again, the digital tube displays 00, and the timer turns off; press the button again to repeat the cycle; within 2-3S after setting the time, it shows the ambient temperature, and “C “indicator turns on
   • In the timer state, the last 0.5 hour counts down, and the digital tube displays the remaining time (not ambient temperature) and enters the standby state after reaching the specified time.

6. Mode button
   In Power on state, press this button to switch the normal, natural, sleep, and smart.

   • Normal: running at a constant speed setting.
   • Natural: running at changing wind speed; in natural wind state, LED only displays the set level, which doesn’t change with the wind speed, same as natural wind.
   • Sleep: running at the natural wind, decreasing by one level every 30 minutes; in sleep wind mode, LED only displays the set level, which doesn’t change with the wind speed, same as natural wind.
   • High speed: 30 minutes at high speed, 30 minutes at medium speed, 30 minutes at low speed
   • Medium speed: 30 minutes at medium speed, 30 minutes at low speed
   • Low speed: running at low-speed natural wind
   • Smart: Integrates NTC detecting ambient temperature
     The specific functions of smart mode are as follows: When the ambient temperature is below 25°C, it runs at the low-speed wind; when the ambient temperature is 25-29°C, it runs at medium-speed wind; when the ambient temperature is above 29°C, it runs at the high-speed wind. Meanwhile, when the smart mode is turned on, the ambient temperature digital tube + smart mode indicator + wind speed indicator flash three times simultaneously at the one- second interval to prompt that smart mode is enabled, and the corresponding wind speed indicator turns on; you can press the Speed button to cancel the smart mode and return to the normal wind.

7. Swing button

   • In the power state, press this button to switch on/off the rotary blades; the corresponding indicator displays its function; the blades rotate 360° clockwise.
   • Press and hold the “Swing” button and “Timer” button simultaneously for 3 seconds to cancel the sound; press and hold the two buttons again to turn on the sound.

Protection function

1. Tank water shortage protection:

   • If the software detects tank water shortage protection switch off (water shortage) for 5 seconds continuously when the water pump has been running for 45 seconds, the pump stops working; the buzzer sends a beep alarm sound for 10 seconds (software control)
   • Press the Cooling/Humidify button three times within three seconds after Power on, and the device sends a beep sound (same as the sound of 5-50°C forced heating of the heater) and enters the quick water shortage detection status.
   • In quick water shortage detection status, press the power button and then press the Cooling/Humidify button. The device will detect water shortage in 3 seconds (initially 50 seconds) and send a water shortage alarm.
   • The quick water shortage detection is canceled after pressing the Power off button.

2. Tank extraction protection:
   When the water tank is extracted, the machine power is cut off, and the buzzer sends a beep sound; when the water tank is put back, the buzzer sends a beep sound, and the Power enters standby mode.

3. Power failure memory function
   In the Power on state, when Power is restored after a power failure, it sends a “bi” sound 10 times (once per second), no display or action; after 30 seconds, it resumes the previous state (all functions are restored).

   • If you press the Power on/off button within 30 seconds, it resumes the previous state immediately.
   • If the Power is cut off in the Power off state, it is still off when the Power is restored.

4. Auto power-off function
   If the device has been running for 15 hours continuously in the default state after Power on and there is no operation, it automatically turns off; if you want to cancel this function, press and hold the “Cooling + Mode” button for 3 seconds, the buzzer sends Bi sound and cancels auto power-off function; press and hold the two buttons again, the buzzer sends Bi sound and resumes auto power-off function

Filling water:
Please add water to the tank before turning on the cooling and humidification function. Before adding water, first open the knob of the water tank lock, tank out the water tank and fill water into the tank slowly (Fig. 1, 2, 3 & 4): After adding water, put the water tank into the original position, and then re-lock the knob of the water tank lock.
Please note the water level in the rear side of the air-conditioning fan water tank (Fig. 5).

1. When filling water, please keep the water between the maximum level and the minimum level
2. Be sure to use clean tap water.
3. Tips: It is normal if the water in the tank has a slight odor or discoloration when the device is used for the first time. It is non-toxic and does not affect your health.

Use of remote control:

1. 1. First, open the battery cover on the rear side of the remote control and insert a 3V CR2032 battery. To open the battery cover: First press in the direction of arrow 1 shown in the figure to detach the buckle of the battery cover, and then remove it along the direction of arrow 2
2. When using, please aim at the receiver.
3. When the battery is exhausted, pull out the battery cover in the direction shown in the figure, and replace the battery (CR2032 3V). Please note the battery polarity and put back the battery cover before using it.

Cleaning and Maintenance

Do not use chemical agents for cleaning.

• Turn off the power and unplug the power cord.
• Always unplug the power cord before cleaning the device, or else it may cause electric shock.
• If dust is accumulated on the surface, please wipe with a soft cloth: if the surface is dirty, mix water lower than 50°C and neutral detergent, wipe with soft cloth and dry.
• Do not use gasoline, thinner or any substance that damages the surface easily for cleaning.
• Cleaning air filter and wet curtain assembly. If too many foreign matters are attached to the air filter, it will affect the wind effect, and therefore it should be cleaned at least once every month.

1. Unplug the power cord,
2. First, take out the air filter and then remove the wet curtain bracket assembly (operate as below).
3. Clean the air filter with detergent and a soft brush.
4. Soak the wet curtain assembly in the cleaner for a few minutes, then wash and dry.

Tank cleaning

1. Unplug the power cord, turn the knob of the water tank lock in the horizontal direction, and take out the water tank.
2. Dampen the towel with detergent slightly and wipe the scale in the tank, then wash with clean water and pour out the sewage.

Machine surface cleaning

1. The device surface can be cleaned with a damp cloth; do not rinse with water directly.
2. Do not use corrosive detergent or solvent for cleaning.
3. Turn off the Power and unplug the power cord before cleaning, or else it may cause an electric shock.

Install and use after cleaning

1. Install the air filter, wet curtain assembly, and water tank in sequence, and ensure that the installation is correct.
2. Connect the Power and make sure that the product is working properly.

Maintenance

1. If the product won’t be used for long, unplug the power cord, pack the device and prevent dust from entering.
2. Before packaging, the wet curtain and filter should be dry, and there is no water in the tank.

Technical Parameters

Technical Parameters|
---|---
Model| DF-AF2908C|
Rated Voltage| 220-240 V~|
Rated Frequency| 50Hz|
Rated Power| 110W|
Noise (high level)| dB≤66|
Dimensions| L/403.0mm×W/345mm×H/930.0mm|
Unit Weight| 8.0Kg|
Package Weight| 10.5Kg|

Environmental Protection

This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>