VOGUE 361281 Front Load Washing Machine Instruction Manual

Front Load Washing Machine
VOGUE Condensor Dryer 8kg
361281/361282
Instruction Manual

Front Load Washing Machine

To prevent the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time

**WARNING**

Read and understand thoroughly these safety Instructions before use. The items indicated here are very Impotent safety precautions, which must be followed. Any failure and losses caused by ignoring the above-mentioned Items and cautions mentioned in the operation and installation Instruction are not covered by our warranty and any liability.
The appliance can be used by crvkien aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concealing use of the appliance in a safe way and understand the hazards Involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Children of less than 3 years should be kept away unless continuously supervised. The rear surface of the appliance shall be placed against a wall. The appliance must not be supplied through an external switching device. such as a timer. or connected to a circuit that is regularly switched on and off by a utility. Oil-affected items can Ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can become hot enough to catch fire. Piling, stacking, or storing oil-affected items can prevent heat from escaping and so create an Are hazard.
If it is unavoidable that fabrics that contain vegetable or cocking oil or have been contaminated by hair care products be placed in a tumble dryer they should first be washed in hot water with extra detergent – this will reduce, but not eliminate, the hazard.

**Possible electric shock**

• Disassembly, repair, or modification can’t be carried out by people other than professional maintenance staff.
• The household electrical supply system (the current. the voltage, the call such as a fuse with suitable specifications should be provided. should meet the requirements of the dryer under normal load, and safety devices.
• The power plug must be connected to a three-core socket with an earth wire and Is grounded properly and reliably.
• If the supply cord is damaged, it must be replaced by the manufacturer Js service agent or similarly qualified persons in cider to avoid a hazard.
• Don’t disconnect the power plug by pulling the supply cord. Hold the power plug with your hand.
• Don’t use the supply cord when the connection between the power plug and the supply cord is loose.
• Don’t touch the power plug with wet hands. Wipe dust or water drops over the power plug off with a dry cloth.
• Don’t over-bend the supply card or put it under heavy weight.
• Don’t use the supply cord /socket/power plug if it is damaged or broken.

Possible Explosions

• Don’t put combustible liquid such as gasoline, petrol, and alcohol into the appliance or nearby. Don’t put clothes with that liquid into the appliance.
• Don’t connect or disconnect the power plug when leakage of gas or other combustible gas occurs.

**Fire accident / short circuit or electric leakage may occur**

• Do not install the appliance dose to fire sources or heat sources.
• Do not rest any burning candles or cigarettes on the appliance.
• Do not install the appliance in places with dampness or suffer from rainfall, lest igniting damages or other accidents occur easily due to gathered water drops on electrical components.
• Do not Install the dryer In places under deed sunshine. lest the plastic components and rubber components become aged.
• Do not use water shooting at the appliance when cleaning it.
• In order to avoid the danger of fires caused by excessive drying, do not use the appliance to dry the following items: Cushions, quilts, and the like (these items accumulate heat).
• If you have washed your laundry with stain remover, you must execute an extra rinse cycle belay loading your tumble dryer.
• Reese makes sure that no gas lighters or matches have accidentally been left in pockets of garments to be loaded into the appliance.
• Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes, and wax removers should be washed in hot water with an extra amount of detergent before being dried in the tumble dryer.
• A carpet must not obstruct the openings in the base.
• Exhaust air must not be discharged into an I kie which Is used for exhausting fumes from appliances bunting gas or other fuels.

**warning
Never stop a tumble dry before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated.**

Personal injury may occur

• This machine is not intended for use by young children or infirm persons without supervision.
• The package materials may be dangerous to children. Put all package materials (e.g. the plastic bag) in places unreachable to children.
• Don’t touch laundries in the drying drum till the dryer stops working completely.
• Don’t keep children or pets nearby when the dryer Is working, for they may be trapped in the dryer. Please check carefully the dim before closing the door.

Other Instructions

• This appliance is designed for domestic use. It must not be used for purposes other than those for which it was designed.
• Orly wash fabrics that are designed to be machine dried. Follow the instruction on each garment label.
• Any electrical work required to reel this appliance Mould be canted out by a qualified electrician or competent anon.
• If the machine is situated on a carpeted now. please Ewa me feet In order to allow air to circulate freely under the appliance.
• Do not dere onto the Oyer or rest heavy °bats heating devices or items with water or liquid leakage on the dryer, lest deformation of the face panel and the plastic component occur.
• Arry obeys such as coins, and safety pins. rids. screws. stones or any other hard. sharp resters! l can cause extensive damage and must not be placed into the machine.
• After having installed the appeal.”), check that a is not pressing or gondola on its electrical supply cable. or vent hose.
• Items such as foam rubber (latex foam), and shower caps. waterproof belles. rubber-backed articles and others or pillows fitted with foam rubber pads should not be dried in the timbre dryer.
• Always unplug the appliance after use, dean, and maintenance.
• Do not overload the apprentice. See the relevant section in the user manual.
• owes which are diming wet should not be placed in the dyer.
• Garments uteri that have been in contact with volatile petroleum products should not be machine dried. II volatile dealing fluids are used, and care should be taken to ensure that the null is removed from the garment tercet placed In the machete.
• Never use the tumble dryer if the power supply cedes the control panel, the working surface, or the base is damaged so that the Inside of the tumble dryer is accessible.
• The tumble dryer Is not to be used if ledustnal chemicals have been used to clear.
• The lint must not be allowed to accumulate around the tumble dryer.
• Do not dry unwashed items in the tumble dryer.
• Fabric softeners or similar products should be used as specified by the fabric softener instructions.
• The Mal part of a tumble dryer cycle occurs vetted heat (cool down cycle) to ensure that the items are left at a temperature that ensures that the items will not be damaged.
• That exhaust air must not be discharged into a Rue which is used for exhausting runes from appliances burning gas or other fuels.
• That the appliance must not be instated behind a lockable door a sting door or door with a hinge on the opposite side to that of the tumble dryer, in such a way that a VI opening el the tumble dryer door is restricted.
• The MI trap has to be cleaned frequently.
• Adequate ventilation has to be provided to avoid the back now of gases Into the room from appliances burning Other lutes. Including open fires.
• bents that have been soiled with substances such as cooking el, and acetone. alcohols petrel. kerosene, spot removes, turpentine. waxes and wax removal should be washed in hot water with an extra amount of detergent before berg dried In the tumble dryer.
• Remove objects from pockets such as lighters and matches.
• Olaf-footed items can ignite spontaneously. especially when exposed to heat sources such as a tumble dryer. The items become warm. causing an oxidation reaction n the oil.
• Oxidation acmes heat If the heat can escape, the In can become hot enough to catch fire. Piling, stacking, or storing oil of footed items can prevent heal from escapee and so create a fire hazard.
• If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by her care products be placed in a tumble dryer they should first be washed in hot water With extra detergent – this will reduce. but not Berlinale, the hazard.

Product Description

1. Control Panel
2. Drainage container
3. Fluff filter
4. Door| 5. Condenser cover
6. Condenser
7. Adjustment leg
---|---

Control panel

1. Programme Selection Knob
2. Time
3. Child Lock
4. Dry Level| 5. Anti Crease
6. Buzzer
7. Delay Start
8. Start/Pause
9. Indicator Lights: Drainage Container Fluff Filter
---|---

First Use

• Ensure that the electrical connections comply with the installation instructions.
• Remove the polystyrene block and any material from the drum.
• Before using your tumble dryer for the first time, we recommend that you place a few damp cloths inside the appliance and dry for 30 minutes There may be dust inside a brand new tumble dryer.

Daily Use

Connect the appliance

• Open the door
• Place the laundry in the drum, one item at a time, shaking them out as much as possible.
• Close the door Please check the laundry does not get caught between the door and filter.

select the required program

• Turn the program selector dial to the required program. The corresponding function lights are on. The program will be switched off if you have not pressed any button for 10 minutes.

Attention:

•   ” is for the ‘standard cotton program’. The program is suitable to dry normal wet cotton laundry and it is the most efficient program in terms of energy consumption for drying wet cotton laundry. Some thick clothes ( jeans, a big towel ). Because of
• the material characteristics, someplace is hard to dry. If you find that they are not completely dry at the end of the program. It is recommended to use the “Time’ program to dry again.

Automatic controlled drying

• You can choose a different program based on your different clothes and materials. The device has the function of sensing the moisture in order to automatically adjust the drying time for optimal drying.
• This automatic control system is fit for most programs except Warm Air, Refresh, and Time.

Time-controlled drying

• You can choose the time of drying according to the actual situation. To cancel a program that is running, tum the program selector dial to ‘or At the end of drying, tum the selector dial to “off” to switch the machine off before removing the laundry.

Program Option buttons

• Depending on the program, different functions can be combined. These must be selected after choosing the desired program and before depressing the Start/Pause button. e. g. choosing the “Heavy program, “Buzzer” function, and “Anti-Crease” function can be combined. When these buttons are pressed, the corresponding pilot lights come on. When they are pressed again, the pilot lights go out.

Select the Buzzer
After turning on the appliance. the buzzer is on if you do no operation. The buzzer can be turned on or turned off during the process. By pressing ‘Anti-crease” and the “Delay start” button at the same time, the buzzer will be turned on and the corresponding pilot light comes on. when the buzzer is on, the signal will sound in the following case:

• Open the door during operation.
• When the water container is full.
• At the end of the program after the cooling phase. When the buzzer is on, if you press the ‘buzzer” button once more, the buzzer will be switched off.

Select the Dry level

• Before you start the machine, you can choose the dry level. The dry level is divided into three grades. ( Heavy Strong Normal )
• This option is only suitable for the five programs: Standard, Cotton, Synthetic, and Bulky Item. Towel.

Select the Anti-creasing

• Anti-crease is a default setting at the end of each program except the “Cotton ” program. Longer Anti-crease can be selected while the program is on standby or paused.

Select Delay starts

• This button allows you to delay the starting of the program by 24 hours max. This option must be selected after having selected the program and before pressing Start/Pause to start the program. Every time the button is pressed, the time is increased by 1 hour.
  

It can be selected in both cases before and after selecting the options program (EurzerAnti-ceasing). The countdown begins after you have pressed the Stan/Pause button and the corresponding light illuminates. The display shows the remaining time. The remaining time is displayed hour by hour.

Display

The display shows the following information:

After you have selected the program, Its duration (In hours and minutes) appears on the display. It is calculated automatically on the basis of the maximum bad accepted for each type of fabric and of the required degree of drying. When the program starts, the remaining time is *played every 1 minute

• Delayed Start.
  If you have selected a delay time by means of the relevant button, the display shows it. The countdown is displayed hour by hour. Once you press the ‘StanPause’ button, the appliance starts the delayed process. If you want to check the selected program press the ‘Delay Starr’ button again. 11 shows We duration of the previously selected program.

• Incorrect option selection
  If you select an Option that is, not COMORO, with the program you have selected, the display shows ErS (error) If you select another program because of incorrect operation while the program is running, the display shows ErS (error).

Select the Start/Pause

Press this button to start the dryer after having selected the program and the options. If the door of the appliance is opened while the program is running .this button must be pressed again after closing the door in order to restart the program from the point at which it was Interrupted. In this case, the light of the Start/Pause button flashes to remind you that the start button needs to be pressed again.

Indicator lights

• These lights indicate the following functions:
• Drying light “This light Indicates that the appliance is in the drying phase.
• Cooling light- “This light Indicates that the appliance is in the cooling phase. At the end of drying, there is a two-minute cooling phase to cool the laundry
• End of program light This light is on at the end of the cooling phase
• Anti-creasing light “This light is on when the anti-creasing program is selected.
• Filter light” ” It owes on every cycle to remind you that the fitter must be cleaned at the end of the program.
• Child Lock light” ” This light indicated the appliance is locked.
• Buzzer light” This light is on when the buzzer program is selected.
• Delay Start light- ” This light is on when the delay start program is selected.
• Drying Type light this light Is on when the drying program Is selected depending on the rotating speed of the washing machine.
• Tank full light “It comes on after each program and also when the water tank Is killed. which reminds you to empty the water container note Empty the water container after each program to avoid the alarm when using it next time.

At the end of the program,
All drying programs end with 10 minutes cooling phase. If the laundry Is not removed at the end of the cycle. the dryer performs an anti-creasing phase (duration:30 minutes. except -The” cotton program).
If you don’t remove the laundry, the machine will stop automatically at the end of the anti-creasing phase. The display shows “End’ and the buzzer sounds if you have selected the buzzer. Tum the program selector dial to ‘off *. all the lights go off.

“Child Lock” functions

When the machine is on, press the meantime Mine’ and ‘Dry lever buttons for several seconds and the system will lock all the buttons. Then all buttons are Invalid except ‘or. If you want to make the appliance return to the normal state, then press “lime’ and try the lever button for several seconds meantime again. The function will be released In the following cases:

• Open the door during operation
• Take out filter drawer during operation
• The water tank is full

You can set again the ‘Child Lock’ function when you restart the machine.

After each use

Important,

If the drying program has to be stopped before it reaches the end we recommend that you turn the program selector dial to position ‘Refresh’ and wait until the end of this cooling phase before removing the laundry.
This will avoid a build-up of heat inside the appliance. To do this first turn the dial to ‘off ‘ and then to ‘Refresh’ and depress the the-Starr button.
Modifying the program
To change a program that is running, first, cancel it by turning the program selector dial to ‘off Select the new program and press the “Starr button.
Attention:
Accenting to –” for the dormant state:

• standby mode. 10 minutes later. without any operation, enter a dormant state.
• the controller shows “End’. 10 minutes later without any operation, enter a dormant state.

**Drying Hints
Before loading the laundry
** Never tumble dry the foliating: Particularly delicate items such as net resins .mxten. silk fabrics with metal Wm, mkt) tights. bulky materials such as anoraks. blankets. eiderdowns. sleeping bag& feather quilts and any items containing rubber foam or materials similar to rubber Poem.
Peep Idler, the Instruct: ens on garment labels:

maybe tumble dried
normal drying (high temperature)
delicate drying (low temperature)
do not tumble dry

• Close pillowcases and covers with fasteners to prevent small laundry items from getting tangled inside them.
• Close press sea zips, hooks, tie belts, and apron strings. Sort laundry according to type and degree of drying required.
• Do not over-dry laundry. this avoids creasing and saves energy.
• Avoid drying dark clothes with light-colored fluffy items such as towels as they could attract fluff.
• The laundry must be thoroughly spun before tumble drying.
• Easy-care items. e. g. shirts, should be briefly pre-spun before drying.
• Knitted textiles(knitted underwear) may shrink a little during drying. Please do not over-dry items of this type. It is advisable to allow for shrinkage when choosing the size of new purchases.
• You can also put starched items into your dryer. However, to achieve the desired starched effect, choose the program door. To remove any starch residues, wipe out the Internal drum after drying with a moist cloth and then rub 11 dries.
• To avoid a static charge when drying is completed, use either a fabric softener when you are washing the laundry or a fabric conditioner specifically for tumble dryers.
• Remove the laundry when the dryer has finished drying.
• If individual items are still damp after drying set a brief post-drying time but at least 30 minutes. This will be necessary, particularly for multilayered items (e.g. collars pockets plc.)

Make sure that no metal objects are left in the laundry (e.g. hair clips, safety pins, pins)

Button up pillowcases .close zip fasteners, hooks, and poppers. Tie any belts or long tapes. To avoid laundry becoming tangled: Close zips, button up duvet covers, and tie loose ties or ribbons(e.g.of aprons). Turn items with double- layered fabrics inside out(e.g.with cotton-lined anoraks. the cotton layer should be outermost). These fabrics will then dry better. Remove all objects from pockets such as lighters and matches.

Maximum loads

Recommended loads are indicated in the program charts: General rules: Cotton, linen: drum full but not too tightly packed;
Synthetics: drum no more than half full;
Delicate fabrics and woolens: drum no more than quarter full.
Try to load the maximum capacity of the machine as small loads are uneconomical.
WARNING: The appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by a utility.

Drying programs

It is possible to choose different drying strength
Cotton| 8kg| Cotton clothes and so on.
It is possible to choose different drying strength
Synthetic| 4kg| Chemical fiber products and so on.
It is possible to choose different drying strength
Bulky Item| 2kg| To dry the larger clothes. (bedsheet, Quilt cover) It is possible to choose different drying strength
Towel| 4 kg| Towel and so on.
It is possible to choose different drying strength
Wool| 1 kg| Knitted sweaters and so on.
Duvet| 3.5kg| Down jacket
Baby Care| 3kg| Baby clothes
Warm Air| —| Used for drying delicate material loads, such as silk, etc. The machine dries depending on the display time, regardless of the drying level.
Refresh| —| The clothes are deodorizing and fresh, and the intensity of drying is weak. The machine dries depending on the display time, regardless of the drying level.
Time| —| Drying thick or multi-layered textiles, the machine dries depending on the display time, regardless of the drying level. e.g. terry toweling items.For drying individual items of laundry or for small volumes.
Underwear| 2kg| Underwear
Denim| 4kg| Denim
Shirts| 2kg| Shirts
Sportswear| 2kg| Sportswear

Kind Notice: for drying bathrobe and toweling towel, the max load doesn’t exceed 6kg.

Laundry weights

The following weights are indicative:

Care and cleaning

• You must DISCONNECT the appliance from the electricity supply before you can carry out any cleaning or maintenance wadi .
• Don’t clean the dryer by directly spraying water onto the dryer. Don’t clean the dryer with benzene, thinner, alcohol, or acetone. Otherwise, it may cause discoloration, deformation, and damage. electric shock or fire. When cleaning the product, be sure to unplug the power cord.
• During the drying cycle, the control panel or the door may accumulate moisture.

Control Panel

• Clean with soft, damp clothes. Do not use abrasive substances.
• Don’t spray cleaners directly on the panel.
• The control panel finish may be damaged by some laundry pre-treatment soil and stain remover products.
• Apply such products away from your dryer and wipe up any spills or overspray immediately.

Stainless Steel Tumbler

• To clean the stainless steel tumbler, use a damp cloth with a mild, non-abrasive cleaner suitable for
• stainless steel surfaces. Remove the cleaner residue and dry with a clean cloth.

cleaning the door

Clean periodically the interior part ‘ of the door to remove any fluff. Accurate cleaning ensures correct drying.

Dryer Exterior

• The enter dryer has a high-gloss finish. Clean with a soft, damp cloth. Don’t use abrasive substances.
• Protect the surface from sharp objects as they may scratch or damage the finish.
• Don’t place any heavy or sharp objects or a detergent box on the dryer. Keep them on the purchased pedestal or in a separate storage box.

Warning

Do not use the appliance without a filter.

Cleaning the filter

• Open the loading door.
• Remove the lint filter by putting it up and opening the lint filter.
• Clean lint, fiber, and cotton raveling by hand or with a soft piece of cloth.
• Close the lint filter and place it back Into its housing.
• A layer can build up on the filter pores that can cause clogging of the filter after using 1the dryer for a while. Wash the lint filter with warm water to remove the layer that builds up on the lint filter surface. Dry the lint filter completely before reinstalling it.

The lint trap has to be cleaned frequently. Warning
Always dean the lint filter and the inner surfaces Warning of the loading door after each drying process.
Water container emptied
The water container collects all of the water from the condenser. The water container needs to be emptied after every drying cycle. If the water container is full, an active program will break off automatically. the light will come on and the buzzer sounds. In order to continue the program, the water container must first be emptied.

1.  Pull out the water container
2. tip water into the pod
3. Pull the water container
4. Press the Start/Pause in the dryer button

Humidity sensor
In the movement process, this device is used for induction clothing humidity, which means that it must be carried on cleaning. The major cause of the dean is must scour out the calcium oxide boiler which is on the sensor surface up. Clean the sensor in the tumbler (See picture). Cleaning the condenser
Condenser is one of the very important assembly to realize effective drying, Therefore need special attention. Suggest you clean the condenser three or four times every year.

1. Open condenser cover
2. Move three pieces of the lock
3. Put the condenser under the tap rod, pull out the condenser make water through completely by cleaning the condenser.
4. According to the installation of opposite direction

Something not working

• Certain problems are due to a lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Center, please carry out the checks listed below.
• During machine operation, it is possible that the Start/Pause pilot light flashes to indicate that the machine is not working. Once the problem has been eliminated, press the Start/Pause button to restart the program, If after all checks, the problem persists, contact your local Service Center.

The dryer does
not work| • Mains plug is not plugged in.
• Loading door is open.
• Have you pressed the Button?| • Plug in at mains socket.
• Close the loading door.
• Press the button again.
Drying results
unsatisfactory| • the Wrong program was selected.
• Filter clogged.
• Incorrect volume of laundry.
• The sediment on the humidity sensor| • Select a different program the next time you dry(see “Drying programs”section).
• Clean lint filter.
• Observe recommended loading volumes.
• Washed humidity sensor surface
Drum light does
not work(option)| • Light bulb is defective.| • Replace the light bulb.
The drying cycle ends shortly
after the program starts. “End” light illuminated.| • Not enough washing loaded or washing loaded is too dry for the selected program.| • Select a higher drying level (e.g. Heavy instead of Strong).
The drying cycle lasts an unusually long time.| • Load volume is too big.| • Reduce load volume.

**** If you are unable to identify or solve the problem, contact our service center. Before telephoning, make a note of the model, serial number, and purchase date of your machine: the Service Center will require this information.

IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.

Technical data

It is dangerous to alter the specifications or attempt to modify this product in any way.
Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
****Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

** IMPORTANT** : The appliance must not bulit-in.

• Unpacking: All packing, must be removed before using the appliance.
• Check accessory: Open the accessory bag and check the accessories.

**** Should the appl ance be moved, ft must be transported vertically.

Earth notes

This appliance must be earthed. In case of failure or damage, the earth can provide minimum resistance to reduce the possibility of electric shock. The power cord has a grounding wire with the device and a power cord with a plug. The plug must be inserted into a properly installed and grounded socket(in accordance with all local rules and standards).

Procedure
Separate earth is required by some local rules. ln that case, you need to buy grounding wire, clips, and screws.
Water discharge
It’s not necessary to discharge the condensed water to the tank, it can be drained out directly.
change drainpipe Pull out the water pipe by means of the arrow direction, Then install the drainpipe. Such as the pliers can be used if it is difficult to do. Removing transport safety packaging foam

Caution!
Before using the machine, the packaging foam must be removed from the drum.

1. open the loading door.
2. Pull off adhesive strips from the inside machine on top of the drum.
3. Remove the two packaging foams from the machine.

Check across the corner

When pressing on the edge, the machine should not shake up and down. (please check two directions) when pressing on the top frame (across the corner), the dryer shakes, need to re-adjust the adjustable feet. Do not put stacks of blankets or a rope on the floor, which could generate some heat and affect the machine running.

** IMPORTANT : The hot air emitted by the tumble dryer can reach a temperature of up to 60°C.
The appliance must therefore not be installed on floors that are not resistant to high temperatures.
Electrical connection**

Any electrical work required b install this appliance should be earned out by a qualified electrician or competent person.
Warning   THIS APPLIANCE MUST BE EARTHED.
****The manufacturer declines any liability should this safety measure not be observed Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance’s rating plate. Should the plug need to be replaced for any reason proceed as described below.
The wires in the mains lead are colored in accordance with the following code:

• Green and Yellow-Earth
• Blue-Neutral
• Brown-Live

The wire colored green and yellow must be connected to the terminal marked with the letter ® or by the earth symbol or colored green and yellow.
Warning

• A cut-off plug inserted into a socket is a serious safety (shock) hazard.
• Ensure that the cut-off plug is disposed of safely.
• Permanent connection In the case of permanent connection it is necessary that you install a double pole switch. The switch must not break the yellow and green earth cable at any point.

PACKAGING MATERIALS

• The materials marked with the symbol are recyclable.

  PE<=polyethylene
  PS<=polystyrene
  PP<=polypropylene

• This means that they can be recycled by disposing of them properly in appropriate collection containers.

• Old machine
  Use authorized disposal sites for your old appliance. Help to keep your country tidy!

• The symbols on ****the product or on its packaging indicates that this product may not be treated as household waste. Instead, it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.

• Symbol means: caution, risk of fire Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil. Oxidation creates heat If the heat cannot escape, the items can become hot enough to catch fire. Piling, stacking or storing oil-affected items can prevent heat from escaping and so create a fire hazard. If it is unavoidable that fabrics that contain vegetable or cooking oil or have been contaminated by hair care products be placed in a tumble dryer they should first be washed in hot water with extra detergent – this will reduce, but not eliminate, the hazard.

Ecological hints

To save energy and to help protect the environment, we recommend that you follow these hints: Try to load the maximum capacity of the machine as small loads are uneconomical.

• Do not over-dry laundry, this avoids creasing and saves energy.
• Select the drying program according to the type of laundry and the required degree of dryness.
• Clean the filters regularly to avoid excessive drying times and high electricity consumption.
• Ventilate the room well.

`Standard guarantee conditions

• We undertake that if within 12 months of the date of the purchase of this appliance, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials, or carriage on the condition that:
• The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
• The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer’s instructions.
• The appliance has not been serviced, maintained, repaired, taken apart, or tampered with by any person not authorized by us.
• This guarantee is in addition to your statutory and other legal rights. ,

This guarantee does not cover

• Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or removable parts of glass or plastic.
• Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements.
• Products of our manufacture which are not marketed by us.

Marking explanation

Electric diagram

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>