vogue Astrea Smartwatch User Manual
- October 30, 2023
- VOGUE
Table of Contents
Astraea Smartwatch
User Manual
Introduction
Thank you for choosing our product! Please read the user manual in order to
have a complete understanding on the smartwatches features and operation
method.
The functions in the user manual may be slightly different from the final
product.
Typos and inconsistencies in this manual will be corrected in a timely manner.
If we have updates, this manual will change without notice. Our company
reserves the right to revise the manual.
Package: One gift box, one user manual, one smartwatch, one charger.
Remark: This model is dustproof only.
Do NOT wear this product when near water. The warranty does not cover you in
case of damage from the above reason.
Button Instruction
- Watch Case
- Power Button ON/ OFF
- Touch Display
- Stainless Steel mesh bracelet
- Sensor
- Charging Magnets
- USB Charging Line
Charging instruction: this product adopts is using magnetic force
charging. Supports 5V= 1A mobile phone charger and computer USB interface. Put
the charging cable to the back of the device’s charging pins, it will charge
automatically. It usually takes 2 hours to fully charge. Do not use the watch
when charging.
Before the first activation of the smartwatch please make sure that the watch
is fully charged. If the watch does not activate, place it for chraging and
activate it later.
Remark:
You should place the magnetic charger correctly at the pins. If the charger is
not properly aligned with the pins, it will cause the circuit to burn.
Connection
The smartwatch can connect with the mobile phone with the “Watch Pro” by downloading it frm the following QR codes or by searching it on Play Store/ APP Store.
App Downlow
Link
https://www.qcwireless.cn/QWatchPro/index.html
Adaptation platform and requirements:
- Android 4.4 and above , IOS 9.0 and above
- Mobile phones supporting BT4.0
After installation, turn on phone Bluetooth and GPS. Open the app, confirm
that the notifications and all others permissions the “Watch Pro” asks are
enabled, otherwise it will not work normally. Open the APP and click on the
second TAB (watch), find and click on the “Device Management”- “Binding
Management”.
When the search is complete chose the model “Τ8_06ΒΕ”.If it doe not show on
the list the first time, please try again. When the smartwatch is properly
connected, time and date will be the same with the mobile phone. Health data
that the smartwatch measures (heart rate, steps, blood pressure, sleep
monitor, blood oxygen) are synchronized with the app.
*Remark: When matching please confirm that it is consistent with the
Bluetooth MAC address displayed on the wristband.
Main Features
Power Button ON/ OFF: Long press the power button for 3 seconds to turn
the smartwatch on/ off.
Watch face: Long press the touch screen fowl 3 seconds to change the
watch face. Under strong light please select the appropriate dial and screen
brightness.
Language Settings: After the watch is connected to the APP, it will
automatically synchronize the mobile phone language. If necessary, it can also
set the language on the watch.
Daily Activity: Record the number of steps, sport mileage and heart rate
on the day. All data are synchronized with the APP.
Sleep: Automatically detect sleep time and status from 22:00 to 08:00.
The watch can detect data only by wearing it during sleep. All data are
synchronized with the APP.
Heart Rate Measurement: Click on the wristband heart rate interface to
“Start Measuring”. Measure the heart rate all day by turning ON the “Heart
Rate Timing Measurement” in the APPs “Device Management”.
Sports: After Bluetooth successfully connects with the APP, the data will
be synchronized to the APP. Click “Start Measuring” on the sports interface to
select the sports mode you need. After selecting it the sports data will be
displayed: mileage/ calories/ heart rate. Swipe right to exit the sports mode.
Blood Pressure: Enter the bloopy pressure measure interface to start
measuring. Please keep your body relaxed during the measurement and the blood
pressure value will be displayed after 30 seconds.
Blood Oxygen Measurement: Enter the blood pressure measurement interface,
please keep your body relaxed during the measurement, and the blood pressure
value will be displayed after 30 seconds.
Female Physiological Cycle: For female users, each stage of their
physiological cycle will be recorded.
Reminder Settings: Turn on the App, set “Alarm Clock Reminder”, “Drinking
Water Reminder”, Excessive Sitting Reminder, Message Reminder, Call Reminder
and Social Media Notifications (Twitter, Facebook, WhatsApp, etc.) in the
interface of “Device Management”-“Reminder Settings”.
Remote Control Photographing: Android: The system turns on the mobile
phone APP, and the watch enters the remote control photographing function and
clicks “Start Photographing” to complete the photographing; IOS: enter the
“Photographing Control” on the watch, turn on the camera on the mobile phone,
and click “Start Photographing” to complete the photographing.
Music Control: Keep the connection between the watch and the mobile phone
APP, enter the watch music menu, and click Play to successfully play the music
in the mobile phone. Click to pause or resume, click to play the previous
song, click to play the next song).
Find Mobile Phone: Click “Find mobile phone” in the dropdown shortcut
menu of watch, and the mobile phone will vibrate within the connection range,
which is easy to find mobile phone.
Do Not Disturb Mode: Click “Do Not Disturb Mode” in the drop-down
shortcut menu of watch, and it will not receive any vibration reminder from
mobile phone.
Brightness Adjustment: Click “Brightness Adjustment” in the drop-down
shortcut menu of watch to adjust the brightness of watch’s display screen
according to the environment.
Stopwatch: It can realize the stopwatch function. Factory Data Reset:
Factory data can be reset in the settings menu of watch.
Breathing training: Users adjust their breathing state according to the
selected rhythm
Disclaimer
- Please ensure that Bluetooth and mobile GPS are turned on. When searching for the device via Bluetooth, make sure that no other device is connected. When searching for the device via Bluetooth, keep a close distance between your mobile and smartwatch.
- If the Bluetooth connection is unstable during operation, try restarting the watch and connecting it to the mobile again. Be sure to turn on the automatic start for the smartwatch application, in the settings of your mobile phone. Also turn off the battery optimization (without restrictions) for the specific application, so that the continuous application-smartwatch communication is not interrupted.
- If there is a problem with the watch or its use, please contact the store where you purchased it.
- The measurements of the watch are for reference only and not for medical use. Please follow your doctor’s instructions and do not use the measurements to make your own diagnosis.
- The watch is dustproof only. In addition, the watch should not come in contact with hot water, as steam can penetrate the seal and cause internal damage.
- The company has the right to modify the contents of this user manual without prior notice. Some functions differ depending on the software they carry.
- CAUTION: Do not use a power adapter that gives more than 5v = 1A to charge the device. If you use a charger larger than 1A for charging, the circuit and / or battery may be damaged.
- Once the watch is charging, disconnect the cable from the power supply to prevent a short circuit if it comes in contact with conducting objects.
- Do not leave the peripherals and accessories in areas where the temperature is too high or too low. Otherwise the device may malfunction.
- Avoid hitting the device to reduce the risk of damage.
- If you don’t use it for a long time, please turn it off and recharge it once every month.
What is NOT Included in the Warranty Terms?
Any defects caused by an accident, misuse, abuse, improper installation or
operation, lack of reasonable care, unauthorized modification, loss of parts,
tampering or attempted repair by a person not authorized by the distributor.
Any product that has not been installed, operated or maintained in accordance
with the manufacturer ‘s instruction manual provided with the product.
Any product that has been used for purposes other than the intended use.
Any damage caused by improper power input or improper cable connection.
FAQ
- What can I do if the smartwatch doesn’t appear on the list with the available devices?
First please check if the smartwatch has battery (over 20%). Then place the smartwatch close to the mobile phone and try again. If this problem still exists, please turn OFF and ON the mobiles Bluetooth and try again.
- Why is heart rate not being measured?
To make the measurement correctly, the watch must have good contact with your skin and the hand is not in motion.
- Why is the watch not showing the messages?
You must have the “Access to notifications” permission enabled. You need to check that the message also appears in the notification bar of your mobile. If it is not displayed, the message cannot be forwarded to the watch.
Caution: Consult your doctor before starting any new physical activity. Although the watch can measure your heart rate in real time, it cannot be used for medical and diagnostic purposes.
The warranty terms that cover the product are
mentioned in the details on the website.
Dustproof OLY
Water contact is prohibited
www.vogue-watch.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>