AIAIAI X02 W+ Link Transmitter User Guide
- June 13, 2024
- AIAIAI
Table of Contents
We LINK
TRANSMITTER
Quick start guide
xO2
XO2 overview
Quick Start Guide
Connect to audio
Connect to your audio source using the USB-C or 3.5mm mini-jack socket on X02.
Power on/off
If connecting to audio using USB-C, X02 will power on when connected.
If connecting to audio using 3.5mm mini-jack, connect the USB-C socket to a
SV/2-10A
adapter (e.g. phone charger). XO2 will power on when connected.
Pairing
First put the device(s) you wish to connect to in pairing mode.
Next hold the button on X02 for 2 sec. LED 1 is solid white when the first
device pairs. If you have a second device, LED 2 is solid whitewhen it pairs.
Regulatory Info
Manufacturer information:
Company name: AIAIAI ApS.
Address:Studiestreede 31,Copenhagen K, 1455
Denmark
Operation temperature: -20-55°C
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However,there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
CAN ICES-3 (B) / NMB-3 (B)
This Class B digital apparatus complies with Canadian ICES-003.
Company name:
Address:
Tel:
E-mail:
FCC ID: 2AKSOX02
IC: 23880-X02
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>