speedlink SL-601810-BK Audivis Ful HD Conference Webcam User Guide
- June 4, 2024
- speedlink
Table of Contents
speedlink SL-601810-BK Audivis Ful HD Conference Webcam
GET STARTED
- Connect the webcam to a free USB port on your computer and place the camera on your monitor using the universal mounting clip. The webcam’s vertical angle can be adjusted as desired. Make sure to choose the video and audio settings
- “USB Camera” and “USB Audio” when using the webcam with your communication apps.
Technical support: www.speedlink.com Safety instructions: www.speedlink.com
SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Please note that the failure to observe these instructions can cause product damage, explosion, fire and/or electric shocks!
- Only use the devices as indicated in the user guide. Do not open or repair them.
- Do not expose the devices to liquids, heat or cold.
- Do not use the devices in a damp environment. Clean the device with a dry cloth.
- Keep the devices and all loose parts away from children, pets and unauthorized persons.
- Only use the devices with the appropriate
- provided accessories/cables.
- Disconnect cables from the devices if they will not be used for a long time. When disconnecting the cables, don’t pull on the cord but on the plug.
- Don’t use the cables in any way other than mentioned in the user guide; don’t bend, cut, extend, knot or step on them.
- Do not insert any foreign objects into the openings of the device. If the devices are damaged in any way or get too hot, stop using them immediately.
- Take caution when using devices that emit radio signals if you have a pacemaker or are dependent on other sensitive electronic life aids.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: Modifications to this product will void the user’s authority to operate this equipment.