UBIQUITI UP-Chime-EU-EA Smart Chime Instruction Manual
- June 4, 2024
- UBIQUITI
Table of Contents
UBIQUITI UP-Chime-EU-EA Smart Chime
Smart Chime
Wireless chime that can be plugged into a standard wall outlet and used with
UniFi Protect doorbells.
The Smart Chime (UP Chime) is a wireless, mesh-covered chime that connects to
a Protect doorbell and rings whenever it is pressed. This peripheral device is
ideal for households that do not have a wired chime system or have one that is
incompatible with their Protect doorbell. The Smart Chime is also seamlessly
integrated with UniFi Protect to ensure that it’s simple to set up and manage
via either the web application or mobile app.
Mechanical
-
Dimensions
UP-Chime-US: Ø62 x 50.6 mm (Ø2.44 x 1.99″) (without prong)
UP-Chime-EU: Ø62 x 68.93 mm (Ø2.44 x 2.71″) (without prong) -
Weight
UP-Chime-US: 127 g (4.48 oz)
UP-Chime-EU: 135 g (4.76 oz) -
Enclosure materials
Polycarbonate, fabric
System
-
Processor
Single/Dual-Core® Xtensa® 32 bit 400MIPS -
Memory
520 kB SRAM
448 kB ROM -
Management application
UniFi Protect -
Networking interface
WiFi 802.11 b/g/n -
Button
Factory reset -
LEDs
(5) White
(1) R/B/W -
Power method
AC -
Supported voltage range
100-240V, 50-60 Hz -
Max. power consumption
3.7W -
Max. TX power
2.4 GHz: 20 dB -
Antenna gain
2 dBi -
ESD/EMP protection
Air: ± 16kV, contact: ± 8kV -
Operating temperature
0 to 40° C (32 to 104° F) -
Operating humidity
10 to 90% noncondensing -
Certi cations
FCC, IC, CE
Audio
-
Speaker
Yes -
Buzzer
Yes
Software
-
Web application
UniFi Protect -
Mobile apps
UniFi Protect (iOS and Android)
FCC
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions.
1. This device may not cause harmful interference, and 2. This device must
accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equip-ment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that inter-ference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This radio transmitter (FCC ID: SWX-UPCME) has been approved by FCC.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>