SEALEY DBG509.V2 35-50MM Dial Bore Gauge Instructions
- June 4, 2024
- SEALEY
Table of Contents
DBG509.V2 35-50MM Dial Bore Gauge
Instructions
MODEL NO: DBG509.V2
Thank you for purchasing a Sealey product. Manufactured to a high standard,
this product will, if used according to these instructions, and properly
maintained, give you years of trouble-free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT IS CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS
INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to instructions
SAFETY
‰ WARNING! Ensure Health and Safety, local authority, and general workshop
practice regulations are adhered to when using tools and equipment.
DO NOT use the dial bore gauge if damaged.
DO NOT drop.
This is a precision instrument, always return gauge components to the
internally lined storage case.
Maintain the gauge in good and clean condition for best and safest
performance.
Keep the work area clean, and uncluttered, and ensure there is adequate
lighting.
Ensure the work area floor is not slippery; wear non-slip shoes.
Components are to be measured and the dial bore gauge is to be stored at room
temperature (21°C).
INTRODUCTION
Precision mechanism with Ø58mm dial and locking rotating bezel, offering an accurate method of measuring a bore or detecting a taper or ovality. Will indicate the deviation from set size by up to 1mm with an accuracy of 0.01mm. The probe body, dial indicator, anvils, and locking nut are also included. Supplied in BMC.
SPECIFICATION
Model No.: ………………………………………………….. DBG509.V2
Dial Diameter: ………………………………………………….. Ø58mm
Maximum Deviation Measurement with Stem: …………… 1mm
Maximum Deviation Measurement, Gauge: …………….. 10mm
Range: ………………………………………………………… 35 – 50mm
Resolution: ………………………………………………………. 0.01mm
CONTENTS
MAINTENANCE
5.1. Keep all components dry and clean with a soft microfiber cloth.
5.2. Return all items to the presentation case after use.
5.3. Store indoors in a temperature-controlled dry environment, circa 21°C.
5.4. This is a precision instrument intended for use by engineers and
engineering inspectors, to keep it out of reach of children.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools,
accessories, and packaging should be sorted, taken to a recycling center, and
disposed of in a manner that is compatible with the environment. When the
product becomes completely unserviceable and requires disposal, drain any
fluids (if applicable) into approved containers and dispose of the product and
fluids according to local regulations.
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications, and component parts without
prior notice. Please note that their versions of this product are available.
If you require documentation for alternative versions, please email or call
our technical team at technical@sealey.co.uk or
01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is
required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk.
IP32 7AR
01284 757500
01284 703534
sales@sealey.co.uk
www.sealey.co.uk
© Jack Sealey Limited
Original Language Version
DBG509.V2 Issue 1 18/03/22
Documents / Resources
|
SEALEY DBG509.V2 35-50MM Dial Bore
Gauge
[pdf] Instructions
DBG509.V2, 35-50MM Dial Bore Gauge, DBG509.V2 35-50MM Dial Bore Gauge, Dial
Bore Gauge, Bore Gauge, Gauge
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>