TRIPP LITE N785-I01-SFP-DU Industrial Gigabit Copper to Fiber Media Converter User Guide
- June 4, 2024
- Tripp Lite
Table of Contents
TRIPP LITE N785-I01-SFP-DU Industrial Gigabit Copper to Fiber Media
Converter
Product Features
- Extends a Gigabit Ethernet connection to an open SFP port with no software or additional configuration
- Industrial housing withstands a wide range of operating temperatures from -40° to 75°C
- Provides ESD, RFI and surge protection
- IP30 rating guarantees protection from tools and wires greater than 2.5 mm
- Open SFP port works with a variety of SFP transceivers
- Can be powered using the included terminal block or a user-provided 12V DC power adapter
- Auto MDI/MDI-X functionality removes the need for crossover cabling
Package Contents
- N785-I01-SFP-DU Media Converter
- Terminal Block (20~57VDC)
- DIN Rail Kit
- RJ45 Cap
- SFP Cap
- Quick Start Guide
Optional Accessories
- N001-Series Cat5e Snagless Ethernet Cables
- N201-Series Cat6 Snagless Ethernet Cables
- N286-Series Transceivers
Installation
Copper to Copper Installation
Notes:
- The following installation instructions refer to an installation in which two media converters are used to increase the maximum distance between two copper switches.
- To effectively communicate between media converters, the speeds of the copper and fiber ports of each media converter should be identical. The diagram and table below show the speed you should use between media converters and switches, as well as which LED will illuminate with respect to that speed.
- . Optional: Connect the included DIN Rail Kit to the unit using the included mounting hardware.
- Connect the RJ45 port of an unmanaged copper Ethernet switch to the RJ45 port of the first N785-I01-SFP-DU media converter with a user-supplied Cat5e/6 cable.
- Connect a transceiver to the first media converter’s open SFP port.
- Connect fiber cabling matching the transceiver type between the transceiver’s port and a matching transceiver connected to a second N785-I01-SFP-DU media converter.
- Connect the RJ45 port of a second unmanaged copper Ethernet switch to the RJ45 port of the second N785-I01-SFP-DU media converter with a user-supplied Cat5e/6 cable.
- Connect the 12~57VDC terminal block or optional 12V DC power supply to the media converters, and plug them into an available wall outlet, Uninterruptible Power Supply (UPS) or Power Distribution Unit (PDU).
- When all connections have been made, check the “L/A (Link/Activity)” LED to confirm the connection has been established.
Copper to Fiber Installation
Notes:
- The following installation instructions refer to an installation in which one media converter is used to increase the maximum distance between a copper switch and a fiber switch.
- To effectively communicate between media converters, the speeds of the copper and fiber ports of each media converter should be identical. The diagram and table below show the speed you should use between media converters and switches, as well as which LED will illuminate with respect to that speed. The diagram also shows how one media converter can be used to increase the distance between a copper switch and a fiber switch.
- Optional: Connect the included DIN Rail Kit to the unit using the included mounting hardware.
- Connect the RJ45 port of an unmanaged copper Ethernet switch to the RJ45 port of the N785-I01-SFP-DU media converter with a user-supplied Cat5e/6 cable.
- Connect a transceiver to the media converter’s open SFP port.
- Connect fiber cabling matching the transceiver and switch type between the transceiver’s port and an unmanaged fiber Ethernet switch.
- Connect the 12~57VDC terminal block or optional 12V DC power supply to the media converter, and plug it into an available wall outlet, Uninterruptible Power Supply (UPS) or Power Distribution Unit (PDU).
- When all connections have been made, check the “L/A (Link/ Activity)” LED to confirm the connection has been established
Specifications
Safety Instructions
Ensure the correct power voltage is being used before operating this product. The correct power supply voltage is listed on the product label. Check the voltage of your power source tomake sure that you are using the correct voltage. Do not use a voltage greater than what is specified on the product label. Failing to adhere to the maximum allowable voltage can lead to overheating wiring, which can cause serious damage to your equipment or fire hazards.
LED Status Table
Warranty and Product Registration
2-Year Limited Warranty
Seller warrants this product, if used in accordance with all applicable
instructions, to be free from original defects in material and workmanship for
a period of two (2) years from the date of initial purchase. If the product
should prove defective in material or workmanship within that period, Seller
will repair or replace the product, at its sole discretion. THIS WARRANTY DOES
NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE
OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY
EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITEDBY APPLICABLE LAW,
ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR
FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE;
ANDTHIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES.
(Some states do not allow limitations on how long an implied warranty lasts,
and some states do not allow the exclusion orlimitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to
you. This warranty gives you specific legal rights, and you may have other
rights which vary from jurisdiction to jurisdiction.)WARNING: The individual
user should take care to determine prior to use whether this device is
suitable, adequate or safe for the use intended. Since individual applications
are subject to great variation, the manufacturer makes no representation or
warranty as to the suitability or fitness of these devices for any specific
application.
Product Registration
Visit tripplite.com/warranty today to register your new Tripp Lite product.
You’ll be automatically entered into a drawing for a chance to win a FREE
Tripp Lite product! No purchase necessary. Void where prohibited. Some
restrictions apply. See website for details.
Warranty and Product Registration
WEEE Compliance Information for Tripp Lite Customers and Recyclers
(European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and
implementing regulations, when customers buy new electrical and electronic
equipment from Tripp Lite, they are entitled to:
- Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)
- Send the new equipment back for recycling when this ultimately becomes waste
Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos and illustrations may differ slightly from actual products
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>