teesa TSA0164 Insect Killer UV Lamp Owner’s Manual
- June 4, 2024
- teesa
Table of Contents
Owner’s manual
Insect killer UV lamp
TSA0164
SAFETY INSTRUCTIONS
- Read the entire instruction manual before you start installation and assembly and keep it for future reference. Keep the manual for future reference.
- Before connecting the device to the power supply socket, make sure the voltage indicated on the device corresponds to the voltage in the power supply socket.
- Device for indoor use only.
- Do not move the appliance while it is operating.
- When you disconnect the power cord of the device, grasp and pull the plug, not the cord/cable.
- This appliance may be used by children who are above 8 years old and by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised and guided by a person who is responsible for their safety in a cautious manner for all the safety precautions being understood and followed. Children should be supervised to ensure that they do not play with the appliance. Children should not perform cleaning and servicing of the device unsupervised.
- Fixed power cable may only be replaced in an authorized service point.
- Keep the device and its cord/cable away from heat, water, moisture, sharp edges, and any other factor which may damage the appliance or its cord.
- Do not place the appliance in water or any liquid; nor handle/use it with wet or moist hands.
- Do not use the product for purposes different from those displayed in this operating manual.
- The producer of this product is not responsible for damages caused by inappropriate handling and use of the device.
- DO NOT use this device if the cord or the plug is damaged, or the appliance is broken.
- Do not attempt to repair this device yourself. Only authorized and qualified personnel may repair this device.
- Do not touch the live mesh.
- Do not clean the appliance with water.
- Do not use this device near flammables and explosives.
OPERATION
- The device should be placed in a designated place.
- Connect the device to the power outlet.
- The device is ready to use after connecting it.
Fluorescent lamp replacement
- Disconnect the device from the power supply.
- Wait for about 10 minutes, until the lamp temperature decreases.
- Unscrew two screws from the bottom of the device and take out the cover.
- Unscrew two screws securing the lamp holder. Take out the holder.
- Screw out the lamp.
CLEANING
- Clean this device and remove insects from it regularly.
- Disconnect the device from power before cleaning.
- To clean this device, use the provided brush.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems)
This marking shown on the product or its literature indicates that it should
not be disposed of with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of waste and recycle it
responsibly to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take this
item for environmentally safe recycling.
Business users should contact their suppliers and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k.,
ul. Garwolińska 1, 08-400 Miętne.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>