nedis WIFIVCR001CBK Wi-Fi Smart Robot Vacuum Cleaner User Guide

WIFIVCR001CBK Wi-Fi Smart Robot Vacuum Cleaner
User Guidehttp://ned.is/WIFIVCR001CBK

Wi-Fi Smart 3-in-1 Robot **Vacuum Cleaner

**

For more information see the extended manual online: ned.is/wifivcr001cbk
Intended use
This product is intended for cleaning a wide range of floorings, such as carpet, laminate flooring, and tiles. This product can be operated by using the buttons on the product and through our free Ned is SmartLife app, which you can download on your mobile device. This product is intended to be used with the original accessories only and is intended for domestic use only. This product is not intended for use in environments with high humidity, like bathrooms. In humid environments the fan can get damaged, affecting the performance of the product. This product is intended for indoor use only. This product is not intended for professional use. This product can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the product in a safe way and understand the hazards involved. Children shall not play with the product. Cleaning and user maintenance shall not be done by children without supervision. The product is intended for use in household environments for typical housekeeping functions that may also be used by non-expert users for typical housekeeping functions, such as: shops, offices other similar working environments, farmhouses, by clients in hotels, motels, and other residential type environments and/or in bed and breakfast type environments. Any modification of the product may have consequences for safety, warranty, and proper functioning.

Specifications

Main parts (image A)

Vacuum kit (image B)

Mopping kit (image C)

Remote control (image D)

Different cleaning kits for different cleaning purposes

• Vacuum kit (image B): for dry cleaning carpets, laminate floors and tile floors.
• Mopping kit (Image C): for mopping laminate floors and tile floors.

Safety instructions

WARNING

• Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference
• Only use the product as described in this document
• Check if the voltage is consistent with the product before charging.
• Only charge the product if the plug is compatible with the power outlet. Do not use adapters. Do not change the plug.
• Only use attachments specified by the manufacturer.
• Do not recharge non-rechargeable batteries.
• Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
• Do not expose the product to water or moisture
• Do not plug or unplug the power cable with wet hands
• Disconnect the product from the power source before service and when replacing parts.
• This product may not be used by persons (including children) whose physical, sensory or mental capabilities or lack of experience and knowledge prevents them from using the product safely without supervision or instruction
• Children should be supervised to ensure that they do not play with the product
• Do not immerse the product, the power cable or plug in water or other liquids
• Do not use the product to collect water or other liquids.
• In the event of a leaking battery, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
• The product is delivered with a partially charged battery. For optimal battery life, fully charge the battery before first use
• Do not use any charger other than that specifically provided for use with the equipment
• The charger must only be plugged into an earthed socket-outlet
• Stop the charging process if the product gets too warm.
• The only power the product with the voltage corresponding to the markings on the product
• Children of less than 8 years should be kept away.
• Cleaning and user maintenance shall not be done by children without supervision
• Keep hair, loose clothing, fingers, and all body parts away from openings and moving parts
• Keep the product away from heat sources. Do not place the product on hot surfaces or near open flames.
• Do not let the power cable touch hot surfaces.
• Do not let the power cable hang over the edge of a table or counter.
• Do not pull the power cable over sharp edges
• Do not sit on the product
• Make sure to remove all loose and fragile objects, cables, wires and cords from the floor to avoid them being damaged by the product.
• Do not place the product in a place where it can easily fall off
• Check if the power cable is properly connected to the product and the power outlet
• Make sure to inform other members of the house when the product is in use to prevent tripping over the product
• Do not exceed the maximum operating temperature of the product
• Do not vacuum flammable or combustible materials (lighter fluid, gasoline, etc.) or use in the presence of explosive liquids or vapor.
• Do not vacuum toxic material (chlorine bleach, ammonia, drain cleaner, etc.)
• Do not vacuum hot coals, cigarettes, matches, or any hot smoking or burning objects.
• Do not use in an enclosed space filled with vapors given off by oil-based paints, paint thinner, mothproofing, flammable dust, or other explosive or toxic vapors.
• Do not vacuum hard or sharp objects such as glass nails, screws, coins, etc.
• Do not put any objects into openings. Do not use with any opening blocked.
• Do not disconnect the product by pulling on the cable. Always grasp the connector and pull
• Do not close a door on the power cable.
• Do not use without filters in place
• Do not open the battery pack or the motor area. There are no user-serviceable parts inside
• Do not use the product in a highly reflective environment. For example, an environment exposed to direct sunlight, or with mirrors nearby.

Explanation of the safety symbols on the product

| Indication to explain that the product should not be used in a bathtub,  shower, or water-filled reservoir.

Installing the charging station
Do not use the product in a highly reflective environment. For example, an environment exposed to direct sunlight, or with mirrors nearby.
Do not place any objects within 1.5 m in front of the charging station A13 and 0.5 m of the left and right side of A13

1. Place A13 on a stable and flat surface, against a wall or immovable object to prevent it from sliding. Make sure that the robot vacuum cleaner A19 has a clear path for return at the end of a cleaning cycle
2. Insert the power cable A19 into the power port A14
3. Connect the other end of A19 to a power outlet.

Installing the Nedis Smartlife app

The functions and details of the Ned Smartlife app may change slightly due to continuous development and upgrades of the app. The specific functions and details of the app are subject to the actual version.

1. Download the Ned is a Smartlife app for Android or iOS on your phone via Google Play or the Apple App Store.
2. Open the Nedis Smartlife app on your phone.
3. Create an account with your mobile phone number or your e-mail address and tap Continue.
4. You will receive a verification code on your mobile phone or e-mail address.
5. Enter the received verification code.
6. Create a password and tap Done.
7. Tap Add Home to create a Smartlife Home.
8. Set your location, choose the rooms you want to connect with, and tap Done.

Adding the product to the Smartlife app (image E)

1. Switch on the product.
2. Tap+ in the Nedis Smartlife app.
3. Select the device type you want to add from the list.
4. Press and hold the recharge button A3 or D6 for 3 seconds.
5. A4 starts blinking to indicate pairing mode is active.
6. Follow the instructions in the Nedis Smartlife app Make sure you connect the product to a 2.4 GHz Wi-Fi network
7. Rename the product after it has been found and added.
8. After confirming you can control the product with your smartphone.

Placing the batteries in the remote control

1. Open the battery compartment D11
2. Pace the batteries A18 in D11
3. Close D11

First use
Remove all packaging before use.
Make sure to remove all loose and fragile objects, cables, wires, and cords from the floor to avoid them being damaged by the product.

Remove protective strips
  The robot is protected with two protection strips that have to be removed before use.

1. Pull the two protective strips out of both the sides of A1.
   The product is now ready for use.

Placing the side brushes (image F)

1. Carefully place A1 upside down on a soft surface.
2. Place the side brushes A10.

  A10 are indicated with L and R marks. Make sure the mark on the side brush matches the mark on A1.

Charging the product

Remove the mopping kit A from A17 before returning the robot to A1 b, to ensure safe charging and to prevent the damp mopping pad C4 from damaging the floor.
the charging indicator LED A12 does not switch off after a reasonable time in which the battery should be fully charged, the battery may have a leakage current. In this case, replace the battery with a new one.
  When the connected battery is fully charged, the current will be reduced to prevent overcharging and gas development. This allows the battery to stay connected to the charger for a longer period without damaging the battery.
  It is still recommended to disconnect the charger when the battery is fully charged.
  Due to the automatic voltage and current control, the connected battery will always stay fully charged.
me product is delivered with a partially charged battery. For optimal battery life, fully charge the battery before first use.
vou cannot switch the robot off or to sleep mode while the robot is charging.
1. Press the recharge button A3 or D6 to return the robot to A13.
A12 blinks to indicate that the robot is charging.
When charging is complete, A12 lights up continuously.
The charging time is approximately 5 hours.
The robot needs to be charged for at least 20% to start scheduled cleaning.
When the battery runs low, the robot automatically returns to A6 for charging.
  When the robot is recharged, the robot automatically returns to the point where it left off to continue cleaning.
If the robot fails to return to A13 the robot automatically returns to the starting point.

Declaration of Conformity
We, Ned, is B.V. declare as manufacturers that the product
WIFIVCR001 CBK from our brand Nedis, produced in China, has been
tested according to all relevant CE standards and regulations and
that all tests have been passed successfully. This includes, but is not
limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety data sheet if applicable) can be found and downloaded via: nedis.com/WIFIVCR001 CBK#support

For additional information regarding compliance, contact the
customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Ned is B.V., de Tweeling 28
5215 MC ‘s-Hertogenbosch, the Netherlands
Nedis BV
De Tweeling 28, 5215 MC ‘s-Hertogenbosch
The Netherlands

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>