TESLA HKS0401A30 HDMI KVM Switch User Manual
- June 4, 2024
- Tesla
Table of Contents
TESLA HKS0401A30 HDMI KVM Switch
Features
- Using only 1 set of keyboard, mouse and monitor to control 2/4 computer devices
- Support Unix/Windows/Debian/Ubuntu/Fedora /Mac OS
- X/Raspbian/Ubuntu for Raspberry Pi and other Linux based system
- Support auto switching to monitor computers in a specified time interval
- Support front panel buttons, IR signals, keyboard hot keys and mouse gesture to control KVM switch to switch inputs
- Available to use keyboard and mouse without any delay after switching input sources
- Support resolution up to 3840 2160@30Hz
- With USB 2.0 hub port, it is possible to connect bar code scanner, USB hard drive or other USB devices to KVM
- With EDID emulators in each input port, keep PCs always having correct display information
- Support DVI-D single link sources and displays with the use of HDMI-to-DVI adapters
Packing List
- 1 HDMI KVM Switch
- 1 DC 5V power adapter
- 1 IR remote control
- 1User’s manual
2×1 Panel Description:
2×1 Panel Description:
2×1 Connection Diagram:
4×1 Panel Description:
4×1 Connection Diagram:
HOW TO USE
- Setup the connection according to the connection diagram.
- After all the PCs are started in step 1, then you can switch to any
PC by keyboard hot keys, IR keys or the key pad on the KVM front panel. (For example, if you want to control the PC connected to HDMI IN 2 just press the “Select” button on front panel, or press digit button “2” on remote control, or the keyboard hotkey commands described following)
HOW TO USE KEYBOARD HOT KEYS:
- Hit Scroll Lock key twice within 2 seconds, the buzzer will beep twice.
- After step 1 enter following hot key commands within 3 seconds, the KVM will execute the corresponding commands.
Select the previous input port
Select the next input port
Select port by port number Enable or disable buzzer sound
Enable or disable fast switching mode (Mouse gesture mode)
If fast switching mode is activated, then double hit left or right bound of
the screen with mouse pointer in 1 second, KVM will switch to previous or next
input.
Turn on auto switching mode
Note: default auto switching time interval is 6 seconds, you are able to
change this value by following hot key commands:
Increase or decrease auto switching time interval
Note:1 second per step, the time is up to 250 seconds.
Turn off auto-switching mode
Note: Execute this hotkey command to exit auto switching mode.
Remote Control
Note:
- For the safety request by some expres company, the remote control is not equipped battery by default.
- The unspecified buttons at above are non-functional.
Warranty Information
We warrant this product as free of defects in material and workmanship for a period of one (1) year from the date of shipment. If during the period of warranty this product proves defective under normal use, we will repair or replace this product, provided that this product has not been subjected to mechanical, electrical, or other abuse or modifications. If it fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair. Such repairs are warranted for six (6) months from the day of reshipment to the buyer.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>