LINDY 43312 100m Fibre Optic USB 3.2 Type C Extender User Manual
- June 4, 2024
- LINDY
Table of Contents
LINDY 43312 100m Fibre Optic USB 3.2 Type C Extender
Introduction
Thank you for purchasing the 100m Fibre Optic USB 3.2 Type C Extender. This product has been designed to provide trouble free, reliable operation. It benefits from both a Lindy 2 year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference. This Extender allows you to extend the distance between your host computer and a USB 3.2 device by up to 100m. It consists of a transmitter and a receiver, which are connected by use of LC Multimode Fibre Optic cable up to 100m length (not included).
Package Contents
- 1x Transmitter
- 1x Receiver
- 1x USB Cable USB Type A / Micro-B, 0.95m
- Lindy Manual
Specification
- USB Standard: USB 3.2 / 3.1 Gen 2
- Supported Bandwidth: 10Gbps
- Maximum Distance: 100m (328.08ft)
- Transmission Medium: Multimode 50µm/125µm OM3
- Chipset: Silicon Line SL86050
- Connectors:
- Transmitter Input: USB Type C (Male)
- Transmitter Output: Duplex LC (Female)
- Receiver Input: Duplex LC (Female)
- Receiver Output: USB Type C (Male)
- Power: USB Micro-B
- Operating Temperature: 0° – 50°C (32°F – 122°F)
- Storage Temperature: -10°C – 70°C (14°F – 158°F)
- Humidity: 10 – 80% RH (non-condensing)
- Power Requirements: 5VDC 2A
Installation
Connect the transmitter with the USB Type C port of the host device first, then connect it with the receiver using a multimode fibre optic cable (not included) with LC Duplex. Please follow the arrows on the units for correct installation of the fibre optic cable, see diagram below). Finally connect the USB device with the USB Type C port of the receiver. Please follow this order, otherwise the device might not be recognized correctly. The Fibre Optic USB 3.2 Type C Extender is supplied with a USB Type A to Micro-B cable which can be attached to a second USB port or to a USB Power supply (not included) should additional power be required.
Recycling Information
WEEE (Waste of Electrical and Electronic Equipment), Recycling of Electronic Products
Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection
and recycling of all waste electrical and electronic equipment. It is no
longer allowable to simply throw away electrical and electronic equipment.
Instead, these products must enter the recycling process. Each individual EU
member state, as well as the UK, has implemented the WEEE regulations into
national law in slightly different ways. Please follow your national law when
you want to dispose of any electrical or electronic products. More details can
be obtained from your national WEEE recycling agency.
CE/FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. You are cautioned that changes or modification not
expressly approved by the party responsible for compliance could void your
authority to operate the equipment. This device complies with part 15 of the
FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Manufacturer (UK):
LINDY Electronics Ltd Sadler Forster Way Stockton-on-Tees, TS17 9JY England
sales@lindy.co.uk , T: +44 (0)1642 754000
Tested to comply with FCC standards. For home and office use. No. 43312 2nd Edition, January 2022 lindy.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>