HIDGEEM SJ-OX1C Portable Oxygen Concentrator User Manual
- June 4, 2024
- HIDGEEM
Table of Contents
HIDGEEM SJ-OX1C Portable Oxygen Concentrator
HIDGEEM portable oxygen concentrator
This user manual will guide you to familiarize yourself with the
HIDGEEMportable oxygen concentrator SJ-OX1C. Please be sure to read before
operating the HIDGEEM portable oxygen concentrator (hereinafter referred to as
machine) and understand all the information in this manual. If you have any
questions, please contact your equipment supplier.
Symbols
Why Your Physician Prescribed Oxygen?
Many people suffer from a variety of heart, lung, and other respiratory
diseases. A significant number of these patients can benefit from supplemental
oxygen therapy at home when travelling, or while participating in daily
activities away from home. Oxygen is a gas that makes up 21% of the room air
we breathe. Our bodies depend on a steady supply to function properly. Your
physician a flow or set to address your particular respiratory condition
Although oxygen is a non-addictive drug, unauthorized oxygen therapy can be
dangerous. You must seek medical advice before you use this oxygen
concentrator. The equipment provider who supplies your oxygen equipment will
demonstrate how to operate the Focus Portable Oxygen Concentrator.
What is the Focus Portable Oxygen Concentrator?
Oxygen concentrators were introduced in the mid-1970s and have become the most
convenient, reliable source of supplemental oxygen available today. Oxygen
concentrators are the most cost-efficient, and safest alternative to using
high-pressure oxygen cylinders of liquid oxygen. An oxygen concentrator
provides all the oxygen you need with no cylinder or bottle deliveries
required. The air we breathe contains approximately 21% oxygen,78% nitrogen,
and 1 other gases. In the unit, room air passes through a regenerative,
adsorbent material called a molecular sieve, this material separates the
oxygen from the nitrogen. The result is a flow of high-concentration oxygen
delivered to the patient.
The weight of the HIDGEEM portable oxygen concentrator is only 5.5 pounds (2.5 kg), which integrates advanced high-efficiency oxygen production and rapid oxygen supply technology. This device effectively provides high-concentration oxygen. As soon as you start breathing, it will quickly deliver the oxygen flow to your body. This machine adopts continuous oxygen supply mode, which will ensure that you can get oxygen supply at any time when the machine is working. HIDGEEM portable oxygen concentrator is lighter in weight, and users can easily use it outdoors. HIDGEEM portable oxygen concentrator can work under different power supplies (Please refer to the Power Supplies section of this manual)
Suitable for people
HIDGEEM is committed to providing patients who feel that the lungs cannot effectively provide enough oxygen to the blood Provide adequate oxygen to sick patients or users. At the same time, the portable oxygen generator can meet the needs of users indoors, and outdoors and participate in various activities requirements of activities. The use ofan an oxygen generator should follow the doctor’s advice and should not be used as life support equipment. Although oxygen therapy can be targeted at users of all ages, typical patients who need oxygen therapy are usually over 65 years old and accompanied by chronic obstructive pulmonary disease (COPD).
Users should have good cognitive ability and the ability to express discomfort symptoms. If the user can’t express discomfort or can’t recognize and understand the icon and product manual of the oxygen generator, it is recommended to have specific personnel take care of the equipment when using it, If you feel unwell while using the oxygen generator for a day, it is recommended to consult a doctor immediately. At the same time, users are advised to prepare spare oxygen sources (such as oxygen cylinders) in case of power failure or failure of the oxygen generator. No special skills are required for users to use and operate the oxygen generator
HIDGEEM portable oxygen generator can be used during air travel
Passengers can carry and use the HIDGGEM portable oxygen generator on civil
aircraft. please contact the specific airline you will take to confirm the
latest policies and information.
Important Safety Rules
Please read carefully and be familiar with the item of the following
HIDGEEM portable oxygen generator Safety information is required.
Please read the safety rules before operating the oxygen concentrator. Start using your HIDGEEM Portable Oxygen Concentrator The HIDGEEM package contains the following items, as follow: If you find any items missing, please contact your equipment supplier.
-
SJ-OX1C User manual x1
-
HIDGEEM portable oxygen concentrator x1
-
HIDGEEM carrying bag x1
-
HIDGEEM Shoulder strap x2
-
HIDGEEM carrying strap x1
-
AC power adapter(AC220V-AC110V 50Hz?60Hz) x1
-
DC12V→DC25.2V Car DC BOOST CONSTANT
CURRENT POWER SUPPLY (optional) x1 -
HIDGEEM Replaceable build-in Rechargeable lithium battery pack x1
-
3m silicon rubber Nasal oxygen inhalation Kit x2
-
2m silicon rubber Nasal oxygen inhalation Kit x2
-
HIDGEEM Battery Pack Charging Cable x1
-
Filter element x3
-
Remote control x1
Connect the HIDGEEM machine Power Socket
Please insert the adaptor plug (Figure 5) into the power socket of the machine
(Figure 6). The adaptor plug only can be inserted from one direction.
The machine can use three different power supplies
Note: Be sure to connect the machine power socket before connecting the power
supply.
Connect the machine to the AC power supply
When it is connected to the AC power adaptor, you can choose to use the
general power supply instead of batteries. To insert the adapter power plug
into the HIDGEEM machine power socket, please refer to “2.2”, it only can be
inserted in one direction.
Connect to the DC power supply
In carFirst t, please connect the 5.52.5 plug of the DC12V → DC24V
inverter to the machine, and please insert a cigarette lighter in the car. For
example: connect to the DC power supply with (a DC12V → DC24V) inverter
Transportation (ship, car, trucks etc.) of the DC power supply, please insert
the power cord 5.52.5 plug into the machine power socket, please refer to
“2.2”. For another end of the power cord, please insert the DC power output
(DC) socket of transportation (Please prepare the power connector cord by
yourself).
Note: It is DC24V for the DC power output socket of transportation.
Connect the battery pack to the machine
Before using the battery pack, please check whether is it enough for the
battery power on the machine?
If the power is insufficient, please do not press the power on/off touch
button, and please replace the battery pack or wait for a full battery charge.
Note: if the machine finds the battery power is low, it will
automatically enter charging mode.
When the battery power is full, please remove the adapter plug from the
machine, and it can be used. For battery charging, please refer to the
description of battery charging.
Insert the battery pack into the designated position of the machine. After
hearing the “click”, and the locking knob like that (Please refer to Figure
7), which means that it is correct for the assembly of the battery pack. The
machine can be worked until the battery power is less than 20%). Please refer
to Figure 7 and Figure 8:
Removing / Inserting Battery Pack
Removing Battery Pack (Please refer to Figure 9, figure 10 and Figure 11):
- Please slide the Locking knob to the unlocking mark in the direction of arrow A.
- Please pull up the Battery Pack in the direction of arrow B to remove the Battery Pack.
Insert Battery Pack (Please refer to Figure 12 and Figure 13)
- Please slide the Locking knob to the unlocking mark in the direction of the arrow A.
- Please insert the Battery Pack in the direction of arrow C, when hearing the “click”, and the locking knob like that (Please refer to Figure 7), which means that it is correct to insert the Battery Pack.
Battery charging
How to become the state of charge
When the battery indicator is less than 20%, the machine will automatically become the state of battery charging, the machine can not be turned on, and it will keep flashing for the battery mark on the screen of the machine, such as(Please refer to Figure 14). The machine only can be, when the battery poweris more than 20%.
Battery charging
- Please insert the adapter into the power socket of the machine. Please refer to 2.c The machine will automatically become battery charge mode. Full charge time ≤ 3H
- When the battery is fully charged, the following mark will be displayed (Please refer to Figure 15)
WARNING
Incorrect use of the battery will cause the battery to heat up, catch fire,
and cause damage and Injury. Do not puncture, hit, trample or fall the battery
box to avoid electricity in the box The pool was severely impacted or hit.
NOTE
The battery does not need to be completely discharged before charging. It is
recommended that each time charge the Battery Pack immediately after use.
NOTE
When the lithium battery is fully charged or fully consumed, if it is
exposed to a high temperature, and will happen the permanent loss of battery
capacity. It is recommended to keep the battery power at 25%—50% and place it
in 23℃—2℃.
Nasal oxygen tube
In order to transfer oxygen from the Hideem host to the user, a pipeline
requires a Nasal oxygen tube. The pipeline is connected to the oxygen output
port of the host machine (see Figure 16)
HIDGEEM recommends using nasal oxygen tubes with 6.6 feet (2.0 meters), or
other suitable pipelines. Other lengths of untwisted / Star tube lines can
also be used, with the longest total length less than 17 feet (5.2 meters).
When the machine is working, but unable to absorb oxygen, please check the
pipeline to ensure that the oxygen inhalation pipeline is correct and that you
conduct oxygen inhalation through the nasal cavity breathe.
(your doctor may recommend you to use a chin rest if necessary) If the
situation holds Continue, please switch to another available oxygen source and
contact your equipment supplier.
Timer settings button
Timekeeping time is 15 minutes, and the maximum count is 3 hours 180 minutes).
If the user presses the time setting button again, the time clock starts all
over again. For example, when the time is not displayed on the display screen
of the machine, press the timer setting button first, andthe timekeeping time
is 15 minutes; add 15 minutes for every operation.
The calculation formula is as follows:
Timer settings time = number of press buttons x15
Total timekeeping time ≤ 3 hours (180 minutes).
Flow button
Based on the value on the display screen, press the flow button once, and it
will be added 1L/minute for the flow of the machin, the maximum value is
6L/minute. When it is the maximum value, press the flow button again, and the
flow will be reset to 1L/minute.
Volume button
It is the top volume for the default value of the machine, when the user
presses the button, the voice broadcast will be on the cycle between” small,
medium, high, volume of”
Locking / unlocking button
on the display screen of the machine, if it is a lock mark, all function
buttons do not work, When pressing the button again, it isan unlocking mark,
and all function buttons are activated.
Replace the air filter
Loosen the fixing screw of the filter cover, remove the filter cover and take
out the air filter, re-insert a new air filter, put the filter cover, tighten
the fixing screws for the original air filter, wash it in clean water and dry
it with the end.
Please store in a cool and dry place for next time use.
Pipeline falling off
When the machine is working, there is no oxygen, please check the pipeline
connection, if the condition continues, please switch to another available
oxygen source and contact your equipment supplier.
WARNING
This machine is not available for life-sustaining purposes. Elderly, young
children or other users who cannot express discomfort need additional
supervision. WWith the audio-visual barrier cod,e the user needs an escort to
help handle the monitoring alarm.
How to deal with the sign indication of the display screen and sound reminders of the machine
NOTE
- Be sure to follow the instructions of the pipe manufacturer for proper use. Consult your doctor the healthcare physician decides the frequency of replacing the pipeline to ensure that the pipeline is fully safe.
The pipeline shall not be kinked, and the longest total length is 17 feet (5.2 meters).
The machine components/function buttons
Operation of HIDGEEM Portable Oxygen Generator
Now that you are familiar with the machine components/function buttons, please
refer to the instructions on the following pages to operate the HIDGEEM
portable oxygen generator.
Operate HIDGEEM Portable Oxygen Generator
-
Place the machine so that air can easily flow into or flow out without obstacles.
-
Insert your pipeline into the oxygen outlet and ensure a tight connection.
-
Please follow the introduction of “2.3” for the machine Power supply.
WARNING It is forbidden to use oil, grease and petroleum products on oxygen- carrying devices main engines or other combustible materials. Oxygen will accelerate the combustion of combustible substances. -
Long press the power button, the power LED will turn green, and the machine will start just fine.
-
It takes some time to reach the maximum oxygen concentration, about three minutes after the machine runs.
-
To turn off the machine, please long press the power button until the power LED turns red, and the machine automatically becomes battery charge mode (the adaptor power supply).
Low battery
When the battery power meets a low level, the battery mark on the machine
appears to be blinking continuously. If no action is taken, the machine will
automatically shut down.
WARNING
In case of alarm or you observe that the machine cannot work normally,
please refer to this manual. If you still can’t solve the problem, please
consult your device supplier.
WARNING
If you feel unwell and have an emergency, please see your doctor
immediately.
Operate function buttons
Long press the power button
The machine power is turned on / turned off.
Cleaning, Care, and Proper maintenance of Cabinet
WARNING
Disconnect the power cord from the electrical outlet before you clean or service the unit to prevent accidental electrical shock hazards.
WARNING
Do not use liquid directly on the unit to clean it. A list of undesirable
chemical agents includes but is not limited to the following: alcohol and
alcohol-based products concentrated chlorine-based products (ethylene
chloride), and oil-based products (Pine-Sol, Lestoil). These are NOT to be
used to clean the plastic housing on Focus, as they can damage the unit’s
plastic
NOTE
Replace the disposable cannula periodically following normal usage according
to your Equipment Provider’s recommendations.
NOTE
Keep the unit clean and free from moisture and dust. Clean the plastic housing
periodically by wiping with a lint-free cloth or with a mild household cleaner
applied with a damp cloth or sponge. Pay special attention to the oxygen
outlet for the cannula connection to make sure it remains free of dust, water,
and particles.
NOTE
To prevent a voided HIDGEEM warranty, follow all manufacturer’s instructions.
NOTE
HIDGEEM does not recommend the sterilization of this equipment
Carrying Bag, Battery Bag and Strap
To clean the carrying bag, battery case, belt, and strap, brush only with
warm, soapy water (do not saturate), then allow to air dry. Do not machine
wash or dry.
Troubleshooting
The HIDGEEM portable oxygen generator can be used without failure for several years. If The portable oxygen generator cannot work. Refer to the icons on the following pages to find the possible causes and solutions. If necessary, consult your equipment supplier
NOTE
Please do not try to solve the possible difficult problems not listed in the
table below.
Problem
|
Possible causes
|
Solutions
---|---|---
The battery mark on the machine appears to be blinking continuously.
|
The battery low level
|
Connect to DC or an AC power immediately
Problem
| ****
Possible causes
| ****
Solutions
---|---|---
The unit does not start on battery power, although the battery indicates a charge.
| ****
Battery may be hot too or cold if left outdoors such as in an automobile
| Allow the battery to reach normal operating temperature which may take several minutes if exposed to temperature extremes.
Temporarily connect your AC or DC power supply to the unit’s power inlet and power source. as needed.
Delay in recharging battery.
| ****
Battery exceeds charging temperature.
| The unit may be operated: however, charging may not resume until the batter
temperature is reduced.
It is normal for The screen display of the unit, but the user can not get
oxygen| ****
Pipeline broken/
The machine problem
| Replace Pipeline/
Turn off the unit. Change to another source of oxygen as available.
All other problems
| ****
A general malfunction has occurred.
| ****
Turn off the unit. Change to another source of oxygen as available, and contact your Equipment provider.
Technology Indicators of HIDGEEM Oxygen Concentrator
Product name | Portable Oxygen Concentrator |
---|---|
Product code | SJ-OX1C |
Product categories | TYPE 1, internal power, BF TYPE |
O 2 CONCENTRATIONS | 93%±3%( 1L±0. 2/ min)- 30%±5%( 6L±0. 5/min) |
O 2 FLOW | 1L±0. 2/ min-6L±0. 5/min |
Dimensions | 221mm(L) 95mm(W) 230mm(H) |
Weight | Machine:2. 5±0. 2Kg‖Battery Pack:0. 5±0. 2Kg |
Power
| AC POWER: AC110V 60Hz~AC220V 50Hz
DC POWER: DC24V
Battery Pack: 12pcs 18650(PTC) Cell 2P6S ‖ 124.8wh
Battery duration| Internal battery pack: 100Minutes
---|---
Battery recharge time| Internal battery pack: ≤3h
Battery cycle life| Approximately 300 times, then 80% capacity
or below.
Noise| 45±5dB(A) (1 meter distance)
Audible alarm & visual indicator
| Power on| acousto-optic
Pipeline falling off| visual
General fault| visual
Low battery| visual
Battery condition| Display the screen of the machine after power on
environment condition
| Normal operation (at 21 )
+5 ~40 ;35%~75%RH; 860hPa∽1060hPa
Storage and transportation conditions
+5 —+40 ; 25%—75%, and No condensation 860hPa—1060hPa
When the storage and transportation temperature is lower than 8℃, the equipment should be placed for more than 4 hours in the working temperature environment before the machine starts.
Working diagram
Guidance on using electromagnetic environment To avoid strong electromagnetic environment interference or interference with other electrical products, please keep the machine at least 30cm away from other appliances.
after-sale service
This product has non-human quality problems within one week from the date of
sale The company is responsible for the guaranteed return, replacement and
repair; Under normal use and maintenance, the machine comes out automatically
with quality problems within one year from the date of manufacture or within
one year from the date of purchase of the machine (at the customer’s option),
the company will provide free maintenance (It is 3 year the warranty period of
the compressor). Beyond maintenance for machines with a fixed term, users can
go to the after-sales service department of the company to handle them
according to the sales bills and warranty cards Reasonable charge for
maintenance at the agency or dealer. If the user can not provide a valid sales
bill, the warranty period start date will be extended 1 month from the
production date of the machine.
The following situations are not within the scope of maintenance:
- Vulnerable and consumable products: earphone type or nasal oxygen inhaler, filter element.
- The user caused water, drugs and other liquids to enter the machine, resulting in the machine not working normally.
- The whole machine is in water or rain.
- Failure caused by unauthorized disassembly, repair and transformation of the machine.
- Faults caused by careless falling during use and handling.
- Failure is caused by failure to operate according to the correct method in the instructions.
- Unforeseen natural disasters (such as fire, earthquake, flood, etc.) or force majeure Damage caused by.
- The scope of removal in the warranty card.
Disposal of wastes and residues
The disposal of wastes and residues shall comply with the corresponding
national laws and regulations.HIDGEEM reserves the right to change the
technology and appearance of this product. There will be no further notice if
the product meets any further changes.
Manufacturer
PRemark:
please keep your order bill to claim your warranty
Please send the warranty card with the machine and provide the invoice for
after-service purposes. service engineer for fast technical support and after-
service
E-mail: service@hidgeemoxygen.com
Web: https://hidgeemoxygen.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>