SEALEY FLR680T Motorcycle/Trike ATV And Mini Tractor Ramp Wide Instruction Manual
- June 4, 2024
- SEALEY
Table of Contents
SEALEY FLR680T Motorcycle/Trike ATV And Mini Tractor Ramp Wide
Product Information
- 680KG Wide Tri-Folding Motorcycle/Trike/ATV & Mini Tractor Aluminium Loading Ramp
- Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.
Product Usage Instructions
Safety
- DO NOT overload ramp, maximum capacity 680kg. All loads must be evenly distributed.
- Always use the safety strap to securely fasten the ramp to the vehicle to prevent slipping.
- Carefully roll or winch equipment up or down the ramp. Never drive or ride equipment while loading or unloading.
- Make sure the ramp is aligned with the wheels of the equipment being loaded or unloaded.
- Always load or unload on a solid, level, well-lit, and stable surface with the vehicle in gear, parking/emergency brake on, and engine off.
- Wear gloves, remove loose clothing and jewellery, and contain long hair.
- Maintain correct balance and footing, do not overreach, and ensure non-slip footwear.
- Keep children and unauthorized persons away from the work area.
- Use as a loading ramp only.
- The ramp surface must be clean, dry, and free from oil, grease, and water.
- Inspect the ramp before each use, check fasteners for tightness, and replace worn or damaged parts.
- DO NOT attempt to use a damaged ramp or modify it in any way.
- Proper care and maintenance of the ramp are critical to safety.
- Improper use may result in personal or property damage not covered by the warranty.
Introduction
- Make sure that loading is carried out on a hard, level, and stable surface with the vehicle in gear, parking/emergency brake on, and engine switched off.
- Unfold and place the edge of the ramp against the tailgate of the vehicle.
- Secure the ramp to the vehicle being loaded using the safety chains. Test the ramp by pulling backwards on it to ensure it does not slide back or disengage.
- Once secure, move the vehicle to be loaded behind the ramp.
- Load the vehicle ensuring the ramp can sustain the weight without bowing.
- Continue loading until the vehicle is fully loaded. Secure and tie down the load.
- Unhook the safety chain and fold the ramp for storage in a clean, dry, and childproof environment.
FAQ
Q: Can I exceed the maximum capacity of 680kg?
A: No, it is important to not overload the ramp and always follow the specified weight limit for safety reasons.
Q: How should I store the ramp when not in use?
A: Store the ramp in a clean, dry, and childproof environment to maintain its condition for future use.
- Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble-free performance.
- IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
- USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
SAFETY
- WARNING! The warnings, cautions and instructions referred to in this manual cannot cover all possible conditions and situations that may occur.
- It must be understood that common sense and caution are factors that cannot be built into this product but must be applied by the operator.
- DO NOT overload ramp, maximum capacity 680kg. All loads must be evenly distributed. Each of the ramps is rated at 226.5kg, DO NOT exceed this.
- Always use the safety strap to securely fasten the ramp to the vehicle to prevent the ramp from slipping off the tailgate.
- Carefully roll or winch equipment up or down the ramp. never drive or ride your equipment while loading or unloading.
- Make sure the ramp is aligned with the wheels of the equipment being loaded or unloaded.
- Always load or unload on a solid, level, well-lit and stable surface with the vehicle in gear the parking/emergency brake on and the engine off.
- Wear gloves. Remove ill-fitting clothing, and remove ties, watches, rings and other loose jewellery that contain long hair.
- Maintain correct balance and footing, do not overreach. Ensure the floor is not slippery and wear non-slip shoes.
- Keep children and unauthorised persons away from the work area.
- Use as a loading ramp only.
- The ramp surface must be clean, dry and free from oil, grease and water.
- Inspect the ramp before each use. Check fasteners for tightness, and replace any worn or damaged parts. Replace the safety strap if the webbing is frayed or worn.
- DO NOT attempt to use a ramp that is damaged in any way.
- DO NOT modify the ramp in any way.
- Proper care and maintenance of the ramp are critical to safety.
- Proper use of this product is critical to safety. Improper use may result in personal or property damage which is not covered by the warranty.
INTRODUCTION
- Model No: ………………………………………………… FLR680T
- Extended Dimensions (L x W x H):. 1760 x 1140 x 20mm
- Folded Dimensions (L x W x H): …..1760 x 380 x 120mm
OPERATION
- Made sure that loading was carried out on a hard, level and stable surface with the vehicle in gear, the parking/emergency brake on and the engine switched off.
- Unfold and place the edge of the ramp against the tailgate of the vehicle.
- Secure the ramp to the vehicle being loaded using the safety chains. Test the ramp by pulling backwards on it. Make sure it does not slide back or disengage from the loading surface.
- Once the ramp is secure and the area is safe to proceed with loading, move the vehicle to be loaded behind the ramp.
- Load the vehicle, and make sure that the ramp is sustaining the load and not bowing from the weight.
- Continue until the vehicle is fully loaded. Secure and then tie down the load.
- Unhook the safety chain and fold the ramp.
- Store in a clean, dry and childproof environment.
ENVIRONMENT PROTECTION
- Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner that is compatible with the environment.
- When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.
- Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and parts without prior notice.
- Important: No Liability is accepted for incorrect use of this product.
- Warranty: The guarantee is 12 months from the purchase date, proof of which is required for any claim.
- Sealey Group, Kempson
- Way, Suffolk Business Park, Bury St Edmunds, Suffolk.
- IP32 7AR 01284 757500
- sales@sealey.co.uk
- www.sealey.co.uk
Documents / Resources
|
SEALEY FLR680T Motorcycle/Trike ATV And Mini Tractor Ramp
Wide
[pdf] Instruction Manual
FLR680T Motorcycle Trike ATV And Mini Tractor Ramp Wide, FLR680T, Motorcycle
Trike ATV And Mini Tractor Ramp Wide, ATV And Mini Tractor Ramp Wide, Tractor
Ramp Wide, Ramp Wide, Wide
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>