INFINITY HZB-12-230V Portable Automatic Ice Maker Instruction Manual

INFINITY HZB-12-230V Portable Automatic Ice Maker

Product Information

Specifications

• Product Name: Portable Automatic Ice Maker
• Recommended Age: 8 years and above
• Power Cord: No. 0.75mm2 minimum size, rated no less than 16A/250V~
• Usage: Indoor use only

Product Usage Instructions

Preparing Your Ice Maker for Use:

1. Do not run the power cord over carpeting or other heat insulators. Keep it away from traffic areas and do not submerge in water.
2. Avoid using an extension cord, but if necessary, use a No. 0.75mm2 minimum size cord rated no less than 16A/250V~ with a plug.
3. Unplug the ice maker before cleaning or making any repairs. Exercise caution when children are around.
4. Place the ice maker indoors and away from direct sunlight or outdoor use.

Warnings and Safety Precautions:

• Follow local regulations for appliance disposal due to flammable gas.
• Keep ventilation openings clear and do not damage the refrigerant circuit.
• Only use recommended methods for defrosting and ice harvesting. Do not use other electrical appliances inside the ice maker.
• Ensure proper grounding of the appliance and place it on an even surface to avoid hazards.

Getting to Know Your Unit:

1. Ice scoop
2. Ice full sensor
3. Ice basket
4. Top cover with transparent window
5. Air exhausting
6. Water drain cap located at the front bottom side of the unit.

FAQ

• Q: Can I use the ice maker outdoors?
  A: No, the ice maker is recommended for indoor use only.

• Q: What should I do if the ice maker is not producing ice?
  A: Check if the ice basket is full, ensure proper ventilation, and follow cleaning instructions in the manual.

• Q: Can children use the ice maker?
  A: The ice maker can be used by children aged 8 years and above under adult supervision.

PORTABLE AUTOMATIC ICE MAKER

INSTRUCTION MANUAL
It is important that you read these instructions before using your portable ice maker and we strongly recommend that you keep them in a safe place for future reference.
Het is belangrijk dat u deze instructies leest voordat u uw draagbare ijsmaker gaat gebruiken, en we raden ten zeerste aan om ze op een veilige plek te bewaren voor toekomstige raadpleging.

IMPORTANT SAFETY INSTRUCTIONS

Your safety and the safety of others are very important.
We have provided many important safety messages manual and your appliance. Always read and obey all safety messages.
This is the safety alert symbol:
All safety messages will follow the safety alert symbol and the word “DANGER” or “WARNING”.

DANGER

WARNING
These words mean:
You can be killed or seriously injured if you don’t immediate follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

PREPARING YOUR ICE MAKER FOR USE
When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock, and injury to persons or property. Read all instructions before using any appliance.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• Do not operate this，or any other appliance with a damaged cord.

• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

• This ice-maker must be positioned so that the plug is accessible .

• Connect to properly polarized outlets only. No other appliance should be plugged into the same outlet. Be sure that the plug is fully inserted into the receptacle.

• Do not run the power cord over carpeting or other heat insulators. Do not cover the cord. Keep cord away from traffic areas, and do not submerge in water.

• We do not recommend the use of an extension cord, as it may overheat and become a risk of fire. If you must use an extension cord, use No. 0.75mm2 minimum size and rated no less than 16A/250V~ with a plug.

• Unplug the ice maker before cleaning or making any repairs or servicing.

• Exercise caution and use reasonable supervision when appliance is used near children.

• Do not use your ice-maker outdoors. Place the ice-maker away from direct sunlight and make sure that there is at least 10 cm of space between the back of your unit and wall. Keep a minimum distance of 10 cm on each side of your unit free.

• Do not use other liquid to make the ice-cube other than water.

• Do not clean your ice maker with flammable fluids. The fumes can create a fire hazard or explosion.

• Do not tip over.

• If the ice maker is brought in from outside in wintertime, give it a few hours to warm up to room temperature before plugging it in.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• This appliance must be earthed.

• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

• This appliance is intended to be used in household and similar applications such as

  • staff kitchen areas in shops, offices and other working environments;
  • farm houses and by clients in hotels, motels and other residential type environments;
  • bed and breakfast type environments;
  • catering and similar non-retail applications.

• Warning: Risk of fire/flammable materials used. Please according to local regulations regarding disposal of the appliance for its flammable blowing gas.

• WARNING : Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

• WARNING: Do not damage the refrigerant circuit.

• WARNING: Do not use mechanical devices or other means to accelerate the defrosting process or ice harvesting process, other than those recommended by the manufacturer.

• WARNING: Do not use other type of electrical appliances inside the ice-maker. WARNING: This appliance must be earthed.
  IMPORTANT:
  The wires in this mains lead are colored in accordance with the following code: Green or Green with a strip yellow: Grounding

  • Blue: Neutral
  • Brown: Live

To avoid a hazard due to instability of the appliance, it must be placed at an even or flat surface.

GETTING TO KNOW YOUR UNIT

General instruction

1. Ice scoop.
2. Ice full sensor
3. Ice basket
4. Top cover with transparent window
5. Air exhausting
6. Water drain cap: at front bottom side of the unit.
7. MAXIMUM WATER LEVEL: ▼
   Remove the ice basket, you can see the water level mark.

Postion of control panel & function
Control Pane l: Easy to use, visible functions touch display setting.

• A. Selected ice size displaying: Small and Large.
• B. Power indicator
• C. Ice-Full indicator
• D .Water shortage indicator
• E. Button to turn on/off the unit.
• F. Button to select ice cube size.

Automatic self-cleaning program
Plug on the unit,press “ON/OFF”button on control panel for more than 5 seconds, to enter the self-Cleaning program need 30 minutes ,the “S, L” indicator flashes in turn durin g cleaning.After cleaning, Drain the water from the inner tank through the drainage outlet at the bottom of the machine.

UNPACKING YOUR ICE MAKER

1. Remove the exterior and interior packaging. Check if ice basket and ice scoop inside. If any parts are missing, please contact our customer service.
2. Remove the tapes for fixing ice shovel, ice basket & ice scoop. Clean the tank & ice basket.
3. Put the ice maker on a level & flat counter top without direct sunlight and other sources of heat (i.e.: stove, furnace, radiator). Maker sure that there is at least 4 inches gap between the back & LH/RH sides with the wall.
4. Allow one hour for the refrigerant fluid to settle before plugging the ice maker in.
5. The appliance must be positioned so that the plug is accessible.

WARNING: fill with potable water only. Only use drinking water.

ASSEMBLE HANDLE
Rotate the handle to the same angle as the mounting hole on the machine， Put It on the machine。

CONNECTING YOUR ICE MAKER

DANGER

• Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged please call our customer service.

  1. This unit should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electric shock.
  2. Plug your appliance into an exclusive, properly installed, grounded wall outlet. Do not under any circumstances, cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should be directed toward a certified electrician.
  3. This appliance requires a standard 220-240Volt, 50Hz electrical outlet with good grounding means.

CLEANING AND MAINTAINING YOUR ICE MAKER

Before using your ice maker, it is strongly recommended to clean it thoroughly.

1. Take out the ice basket.

2. Clean the interior with diluted detergent, warm water and a soft cloth.

3. Then use the water to rinse the inside parts, and drain out the water by unplugging the drain cap on front bottom side.

4. The outside of the ice maker should be cleaned regularly with a mild detergent solution and warm water.

5. Dry the interior and exterior with a clean soft cloth.

6. When the machine is not to be used for a long time, drain water completely & dry the interior.

7. Open the cover, remove the ice basket and pour water into tank.
   Keep water level below the water level mark.

8. Press“ON/OFF” button on the control panel to begin the ice making cycle.

9. Select the ice cube size by pressing the “Select” button. If the room temperature is lower than 15 ℃, it is recommended to select small ice cube in order to avoid ice sticking together.

10. The ice making cycle lasts approx. 6 to 13 minutes, depending on seletion of ice cube size and the room temperature. The recommended room temperature is 10℃ to 38℃.

11. If water pump can’t inject water, the ice maker will stop automatically, and the “ADD WATER” indicator will be on.Press “ON/OFF” button, fill water up to the max. water level mark and press “ON/OFF” button again to turn on the unit again.Allow the refrigerant liquid inside the compressor at least 3 minutes to settle before restarting.

12. The ice maker stops when the ice basket is full and the “ICE FULL” indicator will be on. Warning: Direct sunlight or sunlight reflection may cause infared sensor malfunction. If the unit doesn’t stop even ice cubes obstruct sensor, move the unit where no sunlight.

13. Change water in the water reservoir every 24 hours to ensure a reasonable hygiene level. If unit isn’t to be used, drain all the water and dry the tank.

PROBLEM| POSSIBLE CAUSE| SOLUTION|
---|---|---|---
“ ADD WATER” indicator is on.| Lack of Water.| Stop the ice maker, fill water, and press “ON/OFF” button again to restart the unit.
“ICE FULL” indicator is on.| Ice is full in basket.| Remove ice from ice basket.

Continuous press “Select” button 5 seconds, the unit could make ice 10 cycles even “Ice” indicator is on.

Ice cubes stick together.| The ice making cycle is too long.| Stop the ice maker, and restart it when the ice blocks melt. Select the small size ice cube selection.
Water temperature      in inner tank is too low.| Replace the water. Temperature of

water recommended at 8-32℃

Ice making cycle is normal but no ice formed.| Room    temperature or water temperature in inner tank is too high.| The room temperature should be 10-43℃, water temperature should be 8-32℃
Refrigerant    in       cooling system leaks.| Verify by a qualified technician.
Pipe    in    the            cooling system is blocked.| Verify by a qualified technician.

TECHNINCAL PARAMETERS & CIRCUIT DIAGRAM

EXPLOSIVE DRAWINGS

S/N| Part description| Qty/

Per

| S/N| Part description| Qty

/Per

| S/N| Part description| Qty/

Per

---|---|---|---|---|---|---|---|---
1| Power cord| 1| 13| Ice shovel| 1| 25| Inner tank brackt, RH| 1
2| plastic clip| 1| 14| Evaporator| 1| 26| Stainless wire| 1
3| Back panel| 1| 15| Micro switch| 2| 27| Water Supply pipe| 1
4| Plate back support| 1| 16| Inner tank bracket, LH| 1| 28| Sychronuous motor| 1
5| DC water pump| 1| 17| Back btm panel| 1| 29| Condenser| 1
6| Silicon pump sealing| 1| 18| Back top panel| 1| 30| DC Fan motor| 1
7| Handle| 1| 19| Displaying PCB| 1| 31| Nylon plug drain| 1
8| Control box cover| 1| 20| Touch pad| 1| 32| Copper tube filter| 1
9| Main PCB| 1| 21| Front top panel| 1| 33| plastic   bottom| 1
10| Control box| 1| 22| Water filter| 1| 34| Compressor| 1
11| Ice making box| 1| 23| Ice scoop| 1| 35| Magnetism valve| 1
12| Ice scoop link| 2| 24| Ice basket| 1| 36| Internal Wire| 1

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>