PEAK M-CM-AA-BK-2 Wireless Charging Car Mount Instruction Manual
- June 4, 2024
- PEAK
Table of Contents
PEAK M-CM-AA-BK-2 Wireless Charging Car Mount
Specifications
- Name: Wireless Charging Car Mount
- Model: M-CM-AA-BK-2
- Manufacturer: Peak Design
- Input: 9V2.25A
- Wireless Output: 5W/7.5W/10W/15W
- Accessory: 100cm Recycled USB-C to USB-C cable
Product Overview
- USB-C Input port
- Wireless charging area
- Metal shell and metal bracket
Usage Guideline
- Connect the USB-C end of the provided cable to the USB-C port on the unit, and USB-A end to the charger.
- Wireless Charging: Put the mobile phone in the wireless charging position, you can charge the mobile phone.
- Wireless charging protection: When there is a metal foreign body in the wireless charging position or due to high temperature will start protection, with no output to ensure safety.
Declaration of Conformity
RF Exposure Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Compliance Statement
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
ISED Compliance Statement
- Security and Precaution
Specification
- Name: Wireless Charging Car Mount
- Model: M-CM-AA-BK-2
- Manufacturer： Peak Design
- Input: 9V⎓2.25A
- Wireless Output: 5W/7.5W/10W/15W
- Accessory: 100cm Recycled USB-C to USB-C cable
Product Overview
- USB-C Input port.
- Wireless charging area
- Metal shell and metal bracket
Usage guideline
- Connect the USB-C end of the provided cable to the USB-C port on the unit, and USB-A end to the charger.
- Wireless Charging: Put the mobile phone in the wireless charging position, you can charge the mobile phone.
- Wireless charging protection: When there is a metal foreign body in the wireless charging position or due to high temperature will start protection, with no output to ensure safety.
Declaration of conformity
- Frequency Range:114. 4-148.0KHz; Power H-field: -5.89dBuA/m at 10m (for EU/UK); Frequency Range:354.2-369.4KHz(for EU/UK); Power H-field: -18.02dBuA/m at 10m (for EU/UK).
- Hardware version of this product: V2.3, Software version: V0.30.
- Hereby, [Peak Design ] declares that the radio equipment type[M-CM-AE-BK-2] complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://www.peakdesign.com/EU-certification.
- Hereby, [Peak Design ] declares that the radio equipment type[M-CM-AE-BK-2] complies with UK Radio Equipment Regulations (SI 2017/1206). The full text of the UK Declaration of Conformity is available at the following internet address:
https://www.peakdesign.com/EU-certification.
FCC
RF Exposure Compliance
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
- This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.
FCC compliance statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, under Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED compliance statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Security and Precaution
- Some phone cases may block wireless charging.
- Do not place other materials, like metal objects, magnets, and magnetic stripe cards, between the mobile device and the wireless charger pad.
- Check your mobile device’s battery percentage using the charging icon displayed on the screen of your phone.
- When the mobile device is not placed in the charging area accurately, your mobile device may not charge properly.
- Please do not expose this device to moisture or heat sources.
- This is not a toy, not suitable for children under the age of 7.
FAQ
- Q: How do I know if my phone is charging wirelessly?
- A: When you place your phone on the wireless charging area of the car mount, a charging indicator on your phone should appear, confirming the wireless charging process.