PEAK Forge C RCA Battery Pack Instruction Manual
- October 27, 2023
- PEAK
Table of Contents
PEAK Forge C RCA Battery Pack
PEAK FORGE-C DIAGRAM
TECHNICAL SPECIFICATIONS & KEY FEATURES
TECHNICAL SPECIFICATIONS
- Material: Aluminum
- Size: 2” (~50mm) height, 1.25” (~32mm) width
- Net Weight: 64g
- Battery Type: Li-polymer battery
- Battery Capacity: 2000mAh
- Operating Voltage: 4v–12v*
- Increment/Decrement Voltage Interval: 0.1v
- Battery Life: Up to 10 hours when fully charged*
- Charge Time: 1.5 hours when used with 2Amp 5v adapter
- Battery Charger: DC5V/2A (standard USB adapter) Battery
- Charging Cable: USB-C cable
- Jumpstart Voltage: 9v in 0.2 seconds
- Package Includes: (1) battery pack and (1) USB-C charging cable
Some tattoo machines require a minimum voltage to operate correctly. Check your tattoo machine manufacturer’s voltage requirements before using with the Peak Forge-C. Battery life varies based on (but not limited to) your motor, stroke length, voltage, needle grouping, and pigment thickness.
KEY FEATURES
- Battery built into durable aluminum housing
- Lightweight and compact
- Automatic jumpstart feature
- Automatic shut-off if no activity is recorded for 5 minutes
- Automatic dimming feature if no buttons are pressed for 10 seconds (significantly saves battery capacity)
- Comes with your choice of RCA connector or 3.5mm connector
- Comes in black, pink, or red
HOW TO USE YOUR PEAK FORGE-C
USING YOUR PEAK FORGE-C BAT TERY PACK
-
To turn on the Forge-C without the jumpstart feature, long-press the power button .
Your machine will start with previously adjusted voltage. -
To turn on the Forge-C with the jumpstart feature, quickly double press the power button .
A lightning bolt icon will appear on your display. -
To start or pause your machine, press the power button whenever you want.
A pedal icon will appear on your display when your machine is working. -
When you’re ready to recharge, connect your Forge-C to a USB-C charging cable. You will also see your battery capacity. *
NOTE: We highly recommend you charge your Forge-C using a 2Amp 5v adapter for optimal charging time.
FAULT CODES
This means there
is a short somewhere. Take battery off and try with another direct drive pen to
see if error persists. If battery works on a new machine, that means the
original machine has an issue potentially with the motor. If the battery
continues to display E1, that means the battery will need to be replaced.
This means overcurrent protection. Please open the machine and check to see if the motor is stuck or the drive bar or motor is broken. If all appears to be working, please try a softer membrane needle. An E2 error means there is an issue somewhere outside the battery, and the battery is protecting itself by displaying the E2 error.
This means that the charging cord is faulty. Please change to a new cord and try again.
WARRANTY INFORMATION
WARRANT Y INFORMATION
If you experience any technical issues or your Forge-C battery pack requires
repairs, please contact our customer service team at 410-712-0145. After our
customer service team provides you with a return authorization, you can
download and fill out our Peak Repair Order Form:
Mail your completed repair order form, battery pack, and invoice as proof of purchase to 7410 Coca Cola Dr STE 108, Hanover, MD 21076. You can also direct any questions or concerns regarding issues with your Peak Forge-C battery pack to info@peakneedles.com
If you purchased your Forge-C less than a year ago, we will replace it with a brand new model. If your machine is older than a year, it is unfortunately no longer protected under our one-year warranty.