PEAK PNX13 Control 9 Smart Terminal 2024 Controlmicro Instruction Manual
- June 1, 2024
- PEAK
Table of Contents
PEAK PNX13 Control 9 Smart Terminal 2024 Control micro
Adapter for Gira Control 9
- Switch off the power supply and remove your Gira Control 9 from the flush-mounted box. Switch the power supply and remove your Gira Control 9 from the flush-mounted box.
- Attach the adapters directly to the Gira Control 9 Flush-mounted box. Use Use the Gira mounting screws for fastening. Plug the adapters directly into the Gira Control 9 flush-mounted box. Use the Gira screws for fastening.
- Attach the GiraControl 9 adapter plate to the flush-mounted box with the included mounting screws. Fasting the Gira Control 9 adapter plate to the flush-mounted box using the supplied mounting screws.
- Attach the Power supply coming 24 V cable cores to the Screw terminals (GND, 24V) the Control micro mounting plate or plug it in the PoE cable. Connect the KNX and the network cable. Attach the Mounting plate of the Control micro with the ones supplied Screws on the adapter. Plug the 24V cable wires coming from the power supply unit into the screw terminals (GND, 24 V) of the Control micro mounting plate or connect the PoE cable. Connect the KNX and the network cable. Attach the Control micro mounting plate to the adapter using the screws provided.
- Attach the panel to the mounting plate and If necessary, fasten the grub screws to protect against theft. Insert the panel into the mounting plate and fasten the grub screws to prevent theft.
PEAKnx GmbH Otto-Röhm-Strasse 69 64293
Darmstadt www.peaknx.com
[email protected]
Read User Manual Online (PDF format)
Loading......