PEAK PNX13-10011 Control 9 Smart Terminal 2024 Controlmicro Gira Smart Terminal Instruction Manual
- June 1, 2024
- PEAK
Table of Contents
PEAK PNX13-10011 Control 9 Smart Terminal 2024 Controlmicro Gira Smart
Terminal
Controlmicro
Adapter for Gira Control 9
- Switch off the power supply and remove your Gira Control 9 from the flush-mounted box.
- Plug the 24 V cable wires coming from the power supply unit into the screw terminals (GND, 24 V) of the Controlmicro mounting plate or connect the PoE cable. Connect the KNX and the network cable.
- Attach the Controlmicro mounting plate to the adapter using the screws provided.
- Plug the adapters directly to the Gira Control 9 flush-mounted box. Use the Gira screws for fastening.
- Insert the panel into the mounting plate and fasten the grub screws to prevent theft.
- Fasten the Gira Control 9 adapter plate to the flush-mounted box using the supplied mounting screws.
PEAKnx GmbH Otto-Röhm-Straße 69 64293 Darmstadt
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>