TORIN 600 LBs Winch with 26.3 Feet Cable Owner’s Manual

: June 4, 2024
: Torin

Table of Contents

TORIN 600 LBs Winch with 26.3 Feet Cable
Product Information
Product Usage Instructions
Frequently Asked Questions
TECHNICAL SPECIFICATIONS
SAVE THESE INSTRUCTIONS
OPERATING INSTRUCTIONS
DIAGRAM & PARTS LIST
Contact
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TORIN 600 LBs Winch with 26.3 Feet Cable

TORIN-600-LBs-Winch-with-26-3-Feet-Cable-PRODUCT

Product Information

Specifications:

Brand: Hand Winch
Model: Winch de Mano
Capacity: 600 lbs (1-Speed), 1600 lbs (1-Speed)
Manufacturer: TORIN INC.
Origin: Made in China

Product Usage Instructions

Installation:

Ensure the winch is installed on a firm and flat surface.
Set the ratchet switch to the middle position and pull out the cable until the base holes are visible.
Secure the base using at least 3 sets of 3/8in. bolts and locking nuts in a triangular pattern.
Add an extra metal or hardwood board if needed for stability.
Attach the crank handle to the axis bolt with nut.

Operation:

Set the ratchet switch to the higher position for pulling and the lower position for releasing.
Turn the crank handle clockwise for pulling and counterclockwise for releasing.
Handle the crank securely when changing switch positions.

Safety Precautions:

Never overload the winch.
Avoid using the winch for lifting purposes; it is designed for pulling only.
Avoid placing hands or objects near moving parts like gears, rims, and cables.

Note: Familiarize yourself with the instruction manual before operating the hand winch.

Frequently Asked Questions

Q: Can I use the hand winch for lifting heavy objects?
- A: No, the hand winch is designed for pulling tasks and should not be used for lifting purposes.
Q: What should I do if I encounter difficulties changing the ratchet switch position?
- A: Ensure you hold the crank handle tightly while changing the switch position to avoid any issues.
Q: How can I ensure safe operation of the hand winch?
- A: Always follow the provided instructions, avoid overloading, and keep hands away from moving parts for safe operation.

DESCRIPTION AND INTENDED USE

For safer, easier boat loading and unloading.

TECHNICAL SPECIFICATIONS

SAVE THESE INSTRUCTIONS

CAUTION

Do not attempt to operate the hand winch until you have read and understood this instruction manual.

Never overload!
This winch is designed for pulling, not for lifting!
Never put your hand or anything else near the gear, rim and rolling cable (not included; must be added separately). Always wear gloves when using the winch.
Never try to repair or disassemble the winch when there is a problem. Take the winch to a qualified repair center.
When replacing the cable or strap, make sure that the end of the cable or strap comes through the 4 holes on the side of the rim, and tie a knot in the strap or cable (or weld the end tip of cable to the cable), to prevent the cable or strap from coming out. Then reel the cable or strap by cranking the handle.
Use grease for axis and gears before depositing for a long time.
After moving the item, be sure to secure it. The winch is intended for short term use only.
Keep children and bystanders away while using the trailer winch.
Keep at least 4 full turns of the cable or strap on the reel when pulling.

Warning

The warnings, cautions and instructions in this manual cannot cover all possible conditions or situations that could occur. It must be understood by the operator that common sense and caution are factors that cannot be built into this product, but must be supplied by the operator

OPERATING INSTRUCTIONS

Ratchet switch — There are 3 positions for this ratchet switch: The higher position is for pulling, the lower position is for releasing, the middle position is for both pulling and releasing, but can only be used when the winch is loaded. Hold the crank handle tightly if you want to change the switch position.
Before using, install the winch on a firm and flat surface. To install it, put the ratchet switch on the middle position and pull the cable out until the holes on the bottom of the base are visible. Then use at least 3 sets of 3/8in. bolts and locking nuts, in a triangular pattern, to affix the base to the surface. Use an extra metal or hardwood board when necessary.
Then install the crank handle to the axis bolt with nut.
Put the ratchet switch on the higher position and turn the crank handle clockwise to pull. Put the ratchet switch on the lower position and torn the crank handle counterclockwise to release.