INSTRUCTIONS

LED T8 Tube Series – Direct Replacement

RAB Lighting is committed to creating high-quality, affordable, well-designed and energy-efficient LED lighting and controls that make it easy for electricians to install and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: marketing@rablighttng.com

T8-xx-xxG-8xx-DIR USA

IMPORTANT

READ CAREFULLY BEFORE INSTALLING LED TUBE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE. RAB LED tube must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding is required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

WARNINGS:

DO NOT INSTALL THIS LAMP IN A PRE – HEAT LUMINAIRE

THIS LAMP ONLY OPERATES ON ELECTRONIC BALLASTS. IF LAMP DOES NOT LIGHT WHEN THE LUMINAIRE IS ENERGIZED, REMOVE LAMP FROM LUMINAIRE AND CONTACT LAMP MANUFACTURER OR QUALIFIED ELECTRICIAN.

CAUTION RISK OF FIRE – IF THE LAMP OR LUMINAIRE EXHIBITS UNDESIRABLE OPERATION (BUZZING, FLICKERING, ETC.), IMMEDIATELY TURN OFF POWER, REMOVE LAMP FROM LUMINAIRE AND CONTACT MANUFACTURER.

SAFETY INFORMATION:

For your and other’s safety, please read the precaution carefully before installation:

1. Check the lamp before installation, if there is any damage caused during transportation, do not install.
2. Maintenance should be carried out by technical personnel only.
3. Do not stare at the light source with bare eyes for a long time, or beam to others’ eyes.
4. Do not place any objects on the lamp.
5. Keep the lamp away from flame or high temperature objects.
6. Only replace with same type of LED tube! Risk of electrical shock!
7. If the glass lamp tube is broken, the lamp must be disposed of immediately!

SAFETY PRECAUTIONS:

1. WARNING: Risk of shock. Disconnect power before installation.
2. LED T8 lamp for use only with products described and installed in accordance with product specifications. LED T8 lamp to be operated with fluorescent electronic ballast, emergency ballast and dimming ballast.
3. WARNING: RISK OF FIRE, USE ONLY IN PLACE OF FLUORESCENT LAMPS SPECIFIED ON LABEL. RISK OF ELECTRIC SHOCK. SUITABLE FOR DAMP LOCATIONS

MAINTENANCE NOTES:

1. Disconnect lamp from power supply before any maintenance.
2. Clean luminaire with dry cloth.
3. Do not clean the lamp with corrosive chemicals
4. FOR EMERGENCY LIGHTING WHEN ONLY WITH Ballast – Listed (FTBR/7), PHILIPS EMERGENCY LIGHTING (E49328), Model B50 (Alternate RS), Rated 120/277V, 50/60Hz, Damp Location Fluorescent Emergency Ballast.
5. Please ensure the temperature of Tc point is under 131°F after the lamp working properly for 2 hours, otherwise the performance of lamp might not comply with the specification

PRODUCT FEATURE

1. UL certified
2. Plug-n-Play replacement
3. Full glass housing: No Aging, Yellowing, Bending.
4. Compatible with Electronic ballast, Emergency ballast and Dimming ballast.
5. Widely used in residential buildings, offices, shopping malls, supermarkets,
   hospitals, assembly lines, warehouses, etc.for energy saving illumination.

INSTALLATION INSTRUCTION

• Make Sure Power is OFF
• Remove lens or diffuser (if applicable)
• Remove existing fluorescent lamps from the luminaire.

• Bring LED lamp to luminaire and insert lamp pins into luminaire lamp holders.

• Rotate LED lamp until lamp locks in place. Ensure that the LED lamp front
  points away from the back of the luminaire

• Place lens or diffuser back in place (if applicable)

• Power ON

Instant Start Ballast Wiring Diagram

Two Lamps Ballast Correct Wiring

Three Lamps Ballast Correct Wiring

Four Lamps Ballast Correct Wiring

Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation, operation or maintenance.

Easy Answers

rablighting.com

Visit our website for product info

Tech Help Line

Call our experts: 888 722-1000

e-mail

Answered promptly – sales@rablighting.com

Free Lighting Layouts

Answered online or by request

RAB WARRANTY:

RAB’s warranty is subject to all terms and conditions found at rablighting.com/warranty

0 2021 RAB LIGHTING Inc.

Northvale, New Jersey 07647 USA

T8DIRBAA-IN-0821

Documents / Resources

| RAB T8 Tube Series Lamp [pdf] Instructions
T8 Tube Series Lamp, T8, Tube Series Lamp, Lamp
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>