JBL EVEREST 710 Manual
- June 2, 2024
- JBL
Table of Contents
JBL EVEREST 310/710
1. What’s in the box
Charging cable
Detachable audio cable with remote
Warning card, Warranty card, Safety sheet, QSG and Carrying Case
2. Overview
a, Buttons & LEDs
b. Connections
3. Bluetooth ® Connection
-
Turn on the headphone
-
If connecting for the first time, the headphone will enter the pairing mode automatically after it is powered on
-
Connect to bluetooth device
4. To Use ShareMe™ 2.0
To use ShareMe 2.0
ShareME 2.0 enables sharing your audio with another set of Bluetooth wireless
headphones of any brand.
Step 1: Pair and connect JBL Everest headphone to a source device
Step 2: Pause music or disengage the voice call from the source device
Step 3: Press “ShareMe 2.0” button. JBL Everest headphone is ready to
connect to other headphone
Step 4: Turn on the Bluetooth pairing function in the other headphone.
Keep both headphones near each other.
Step 5: Press the play button in the source device to share audio between
two headphones.
Step 6: Press “ShareMe 2.0” button to turn off this feature.
5a. Music control
5b. Phone Call
6. Seamlessly switch between devices
-
Pair and connect the headphone with the 1st device (see Section 3 Bluetooth Connection)
-
Pair and connect the headphone with the 2nd bluetooth device
-
Connect to bluetooth device
-
Go back to the bluetooth device list on the 1st device and select the headphone* to connect
Items to note:
-
Maximum 2 devices can be connected simultaneously
-
To switch music source, pause the music on the current device and select play on the 2nd device.
-
Phone call will always take priority.
-
If one device goes out of bluetooth range or powers off, you may need to manually reconnect the other device. See Section 7 Step 3.
7. LED behavior
8. Specifications
JBL EVEREST 310
- Driver size: 40m
- Dynamic frequency response range: 10Hz-22Hz
- Sensitivity: 96dB
- Maximum SPL: 111dB
- Microphone sensitivity @ 1kHz dB v/pa: -42
- Impedance: 32 ohm
- Bluetooth Max Output Power: 4dBm
- Bluetooth transmitted modulation: GFSK, 4DQPSK, 8DPSK
- Bluetooth frequency: 2.402 GHz-2.48GHz
- Bluetooth profiles: HFP v1.6, HSP v12, A2DP c 1.3, AVRCP c1.5
- Bluetooth version: v4.1
- Battery type: Polymer Li-ion Battery (3.7V, 610mAh)
- Charging time: 2 hours
- Music play time with BT on: Up to 20 hours
- Talk timewith BT on: Up to 20 hours
- Weight (g): 230g
JBL EVERST 710
- Driver size: 40m
- Dynamic frequency response range: 10Hz-22Hz
- Sensitivity: 96dB
- Maximum SPL: 111dB
- Microphone sensitivity @ 1kHz dB v/pa: -42
- Impedance: 32 ohm
- Bluetooth Max Output Power: 4dBm
- Bluetooth transmitted modulation: GFSK, 4DQPSK, 8DPSK
- Bluetooth frequency: 2.402 GHz-2.48GHz
- Bluetooth profiles: HFP v1.6, HSP v12, A2DP c 1.3, AVRCP c1.5
- Bluetooth version: v4.1
- Battery type: Polymer Li-ion Battery (3.7V, 850mAh)
- Charging time: 2 hours
- Music play time with BT on: Up to 25 hours
- Talk timewith BT on: Up to 25 hours
- Weight (g): 258g
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
JBL EVEREST 710 Manual – Optimized PDF
JBL EVEREST 710 Manual – Original PDF