GE APPLIANCES 44235 4 Device Universal Remote Control User Manual

GE APPLIANCES 44235 4 Device Universal Remote Control

INSTALL STREAMING REMOTE

1. Press down on back of remote and slide battery cover to remove.
2. Insert 2 AA batteries, paying attention to the + and – marks inside the compartment.
3. Re-align the cover, then slide it back into place until it clicks.
4. Remote should now be ready to connect with the 4 devices you want to control.

Compatible with most Roku streaming devices (excluding Roku Stick).

SETUP

Battery Precautions: Do not mix old and new batteries, different brands, or types. Do not expose batteries or remote to excessive heat. Dispose of used batteries according to local laws.

1. Turn on the device you want to control.
2. Press and hold the SETUP button until the red light stays on, then release it.
3. Press and release the button corresponding to the device you want to control (TV, DVD, AUDIO, etc.). The red light will blink once and stay on.
4. Point the remote at the device and test the buttons to see if the device responds appropriately. If not, follow the instructions for either Direct Code Entry, Auto Code Search, or Code Identification.

TROUBLESHOOTING

If the remote does not operate your device:

• Ensure the remote is pointed directly at your device and make sure there are no obstructions between the remote and the device.
• Try the remote with the equipment powered ON and OFF.
• Make sure you use the correct device button to program the remote.
• Red LED light should blink with each keypress. If not, replace the batteries.
• If none of the codes work, your device may not be compatible with the remote.

Remote may operate some features of your device that it was not intentionally programmed to operate. Some functions may not be available or may be different from the original remote.

BUTTON FUNCTIONS

1. Power – Turns device on/off
2. Input – Selects video source
3. Device Buttons – Selects device to control (DVD/BLU-RAY™/STREAMER – CBL/SAT – TV)
4. Reverse – Rewind, skip backward, or fast scan
5. Stop – Stop playing media
6. Start – Start, pause, or resume media
7. ACC – Access additional features on DVD, cable or audio components
8. Menu – Displays the on-screen menu
9. Up/Down/Left/Right Navigation Arrows
10. OK – Selects an item in the on-screen menu
11. Back – Returns to the previous menu or screen
12. Home – Displays the main screen of the streaming device
13. Volume +/-
14. Volume channel +/-
15. Mute – Mutes sound
16. Info – Displays information about the media
17. Number Pad
18. Dots – Accesses digital sub-channels (e.g., 5.1)
19. Setup – Programs the remote
20. CC – Closed caption

DIRECT CODE ENTRY
Direct code entry is recommended for quick and easy programming:

1. Turn on the device you want to control.
2. Press and hold the SETUP button until the red light stays on, then release it.
3. Press and release the button for the device you want to control (TV, DVD, AUDIO, etc.). The red light will blink once and stay on.
4. Enter the first 4-digit code listed in Step 1. The red light will turn off after the code is entered.
5. Point the remote at the device and test the buttons. If they don’t work, repeat Steps 2-3 with the next code provided for each device type.

Keep your device codes for future reference.

AUTO CODE SEARCH

Auto code search finds codes for your devices:

1. Manually turn on the device you want to control.
2. Hold the device button (TV, DVD, etc.) and the ON/OFF button simultaneously until the red light stays on solid.
3. Press and release the PLAY button. The remote will send out a series of codes to the device with a 5-second pause between each code set. Press PLAY until the device turns off.
4. Press the REVERSE button. Wait 2 seconds to see if the device turns back on. If it does, press STOP.
5. If the device does not respond, repeat Steps 3-4 until you find a code that works.

Keep your device codes for future reference.

CODE IDENTIFICATION

Code Identification saves you time if the device is already programmed:

1. Press and hold the SETUP button until the red light stays on, then release it. The red light will blink off.
2. Press the button for the device you want to identify.
3. Press and hold the number keys indicated in the instructions until the red light blinks. The red light will indicate the first digit of the 4-digit code for the programming sequence.
4. Press ENTER.
5. Press the BITS button to reveal the code.

MASTER VOLUME CONTROL
Master volume control lets you select an audio device to control the audio volume whether:

1. Press and hold the SETUP button until the red light stays on, then release it.
2. Press the volume UP button for the audio component you want to control.
3. The red light will blink twice and it will take care of the volume.

Disabling Master Volume Control:

1. Press and hold the SETUP button until the red light stays on, then release it.
2. Press the volume DOWN button.
3. The red light will blink twice and it will take care of the volume.

COMBO DEVICES

Some combo devices (e.g., TV/DVD, TV/VCR) might require separate codes for each mode. If you reach an impasse with a combo device, repeat steps 1-4 using the other device’s code.

RESET TO FACTORY SETTINGS

1. Press and hold the SETUP button until the red light stays on, then release it.
2. Press and release 0 (zero). The red light will blink twice.
3. Press and release ENTER. The red light will blink twice to confirm.

Specifications

FAQ

What do I do if my remote isn’t controlling my device?

Ensure the remote is pointed directly at the device, try the remote with the device powered ON and OFF, make sure you use the correct device button, check if the red LED light blinks with keypress, or your device may not be compatible.

How do I program my remote?

Use Direct Code Entry, Auto Code Search, or Code Identification methods as outlined in the manual.

Can I control the volume on all my devices with the remote?

Yes, you can use the Master Volume Control feature to select an audio device to control the volume for all devices.

What should I do if I want to reset my remote to factory settings?

Press and hold the SETUP button until the red light stays on, then release it. Press and release 0 (zero). Press and release ENTER. The red light will blink twice to confirm.

This transcription includes textual information and descriptions of the diagrams as requested. If you need any additional information or have further questions, please let me know.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>