Hoover FH14050 CLEANSLATE Carpet and Upholstery Spot Cleaner User Guide
- June 4, 2024
- Hoover
Table of Contents
Hoover FH14050 CLEANSLATE Carpet and Upholstery Spot Cleaner User Guide
GETTING STARTED
-
Remove Solution Tank from the unit.
-
Add cleaning formula to Solution Tank using the ratio chart in manual and included measuring cup.
-
Slide tank back into the unit. Unwrap hose from unit and attach preferred tool.
HOW TO USE
SPRAY
Spray a generous amount of cleaning formula over stain by pressing the trigger behind the tool.
SPIN
Place the SpinScrub tool on the stain and allow the tool to rotate on the spot.
SUCTION
Apply downward pressure on the front of the cleaning tool and pull towards you to lift the stain. Repeat as needed.
TOOLS FOR EVERY MESS
SpinScrub Tool
Tackle tougher stains with less effort.
Tight Spot Tool
Clean crevices, corners, baseboards and other tough to reach areas.
Hose Rinse Tool
Flush the hose with water to remove any left behind dirt & debris after use.
PRO TIPS
FOR BEST EXPERIENCE: Use formula ratio chart in manual when filling solution tank. Add water before formula.
FOR BEST PERFORMANCE: Empty the tank, flush the hose, and rinse the tools after each use.
WHEN FULL, THERE WILL BE A CHANGE IN OPERATING SOUND: Empty recovery tank promptly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>