ZigBee 2700101 Human Motion Sensor Instruction Manual
- June 1, 2024
- zigbee
Table of Contents
ZigBee 2700101 Human Motion Sensor
Access settings
Note : add an intelligent gateway before adding this device.
-
Install the battery on the device When the product leaves the factory, it comes with a 2450 battery. Please pull out the battery spacer to power on and make sure the mobile phone is connected to the network.
-
The first power on will automatically enter the distribution network mode, or press the reset button (the reset button is on the back of the product) with the pin for more than 10 seconds, and the device indicator will flash to enter the distribution network mode.
After the distribution network is successful, the distribution network indicator will go out. -
Open the app, click the gateway, and add a sub-device under the gateway. Make sure that the system automatically searches for the device after the indicator light flashes. After waiting for one minute, the system can automatically add the device.
Product structure diagram
Note : the indicator light of the distribution network is in the top semicircular Fresnel lens.
Product overview and features
Human motion sensors detect the movement of people or animals in the environment by infrared and combine with other intelligent devices to realize intelligent application scenarios
Installation method:
Take the product out of the package, stick the double-sided adhesive tape in
the back center of the product, tear off the protective paper of the adhesive
tape, and paste it at any place where it needs to be installed.
Download and install app
Search the app store for “Smart Life” or “Graffiti Smart” to download and
install.
Product specification
Quality assurance
Under the normal use of users, the manufacturer provides free 2-year product quality warranty (except panel) replacement and provides lifelong maintenance quality assurance beyond the 2-year warranty period.
The following conditions are not covered by the warranty:
- Damage caused by external factors such as artificial damage or water inflow:
- The user disassembles or refits the product by himself (excluding panel disassembly and assembly):
- Beyond the technical parameters of this product due to force majeure such as earthquake or fire;
- Installation, wiring and use not by the manual;
- Beyond the scope of the product’s parameters and scenarios.