LXZB Tuya Controller voor Zigbee LED Strips User Manual

Table of Contents

Resetting the Light
To pair the light with a bridge again, follow these steps

Option 1: Keep pressing the LED Driver reset buttons for 5-10 seconds until the light flickers a few times.
Option 2: Turn on the light, wait 1-2 seconds, turn it off, wait 1-2 seconds, and repeat this sequence (10 times on and 10 times off) until the strip light flickers.

Pairing with SmartThings Hub
To pair the product with SmartThings Hub

For SmartThings Classic APP : Click “Add a Thing” to search for the new device. The downlight will be added as a 3A Nue Zigbee Downlight or a Thing.
For SmartThings APP: Click “Add a Device” to search for the new device. The switch will be added accordingly.

Required 12/24V DC Adaptor Plug

Note:

The 12V DC adaptor is not included with the ZigBee controller
The power/currents of the adaptor depend on your strip light maximum power consumption

Reset the light when need to pair it with a bridge again.

Keep pressing the LED Driver reset buttons for 5-10 seconds until the light flicks, a few times Or – Turn on, wait 1-2 seconds, turn off, wait 1-2 seconds, on… (10 times on and 10 times off) until the strip light on and flicking.

LXZB-Tuya-Controller-voor-Zigbee-LED-Strips-FIG-6

Download and open the Hue App
Tap ‘Settings’ button on the home page, select ‘Light setup’, then click ‘Add light’
Wait a minute, and the indicator will stop blinking, then the device will be added in as an ‘on/off the light’ successfully. rename it as “XXXX” or any other one.

Reset and support
Reset the Strip Light Controller when need to pair it with a bridge again.

Keep pressing the switch touch buttons for 10 – 15 seconds until a green light on and flicking, Or
Open the switch glass cover and press the reset button for 10 seconds until the little light LED light is on and flicking.

Note: If max load is beyond the normal range, and will damage the device, please use within the scope of security.

Connect to Samsung SmartThings

Pair with SmartThings Hub

Open SmartThings Classic APP: click “Add a Thing” to search new device. The downlight will be added in as a “3A Nue Zibgee Downlight” or a “Thing” Or
Open SmartThings APP: click “Add a Device” to search new device. The switch will be added in as a “3A Nue ZigBee Downlight” or a “Device”
If the switch is added as “Thing” or “Device” , login
https://account.smartthings.com
Click “My Devices” Tab —> Select andEdit the new device “Thing” or “Device” by changing “Name: light switch or something else” and “Type: ZigBee Switch”
Click the “Update” button to save the changes.- Go back to SmartThings or SmartThings Classic APP to control the smart light.

Note: You can find the detailed instructions and Device Handler from 3aSmartHome.com/Downloads

Connect to Echo Plus

Method A

Method B

Download and open the Alexa App
Tap “Devices” on the home page, tap ‘+’, then select ‘Add Device’, select “Light”, and select “Other” to start searching
Wait a minute, and the indicator will stop blinking, then the device will be added in as ‘of this device as ” any other one.”.’ successfully.

Connect to Hubitat hub

Method A
Pair it with the Hubitat hub

Method B

Frequently Asked Questions

Q: Do I need to purchase a separate 12V DC adaptor for the ZigBee controller?
- A: Yes, the 12V DC adaptor is not included with the ZigBee controller. The power/currents of the adaptor should match your strip light’s maximum power consumption.